Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DALY, this electronics is a good fit for makers, students and electronics hobbyists. Main specs: charging voltage(v) LiFePO4: N (Battery string)*3.65V; main circuit on-resistance (mω) <10; equalization turn-on voltage (v) LiFePO4: 3.4 (Can be set up). Check that your power source supplies LiFePO4: N (Battery string)*3.65V before connecting it.

Key Highlights

  • Wireless connection
  • Water-resistant casing
  • Charging voltage(V): LiFePO4: N (Battery string)*3.65V
  • Main circuit on-resistance (mΩ): <10
  • Equalization turn-on voltage (V): LiFePO4: 3.4 (Can be set up)

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Charging voltage(V)LiFePO4: N (Battery string)*3.65V
Discharge current (A)250 300 400 500
Discharge overcurrent protection value (A)375 450 600 750
Charging current (A)250 300 400 500
Charge overcurrent protection value (A)375 450 600 750
Main circuit on-resistance (mΩ)<10
Equalization turn-on voltage (V)LiFePO4: 3.4 (Can be set up)
Equalize opening differential pressure (mV)50(Can be set up)
Balance current (mA)LiFePO4: 100±30
Short circuit protection conditionsExternal Load short circuit
Short circuit protection delay(uS)10-500 The actual test is subject to the customer's battery sent back to our company for testing
Short circuit protection releasedRemove load release
Protection voltage(V)LiFePO4: 3.75±0.05 (Can be set up)
Protection delay(S)1±0.8
Recovery voltage(V)LiFePO4: 3.65±0.05
Protection voltage(V)LiFePO4: 2.2±0.05 (Can be set up)
Protection delay(S)1±0.8
Recovery voltage(V)LiFePO4: 2.3±0.05
Protection delay(S)1±0.8
Release conditionRemoving the load is lifted
Current consumptionWorking current(mA) < 50
Operating temperature(℃)Charging: -35~75 discharge: -35~75 (can be set up)
Storage temperature(℃)-40~85
Resting current(uA)<800
Sleep time(S)3600

Overview

The DALY BMS S-type Smart LiFePO4 Battery Protection Board with bluetooth RS485 CAN Built-in Parallel Module High Current Resistance Waterproof Efficient Temperature Control, made by DALY, is listed in our electronics range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Charging voltage(V): LiFePO4: N (Battery string)*3.65V (note the battery type so you can order spares or the right charger)
  • Discharge current (A): 250 300 400 500 (your supply must deliver at least this much current)
  • Discharge overcurrent protection value (A): 375 450 600 750 (your supply must deliver at least this much current)
  • Charging current (A): 250 300 400 500 (check which plug or cable it needs)
  • Charge overcurrent protection value (A): 375 450 600 750 (your supply must deliver at least this much current)
  • Main circuit on-resistance (mΩ): <10
  • Equalization turn-on voltage (V): LiFePO4: 3.4 (Can be set up) (match this to your power supply; too high a voltage can damage the part)
  • Equalize opening differential pressure (mV): 50(Can be set up)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

 

 

Features:

1.Advanced Waterproofing: IP-rated waterproofing ensures that the BMS performs reliably in various environmental conditions, providing optimal battery protection in harsh and wet environments.

2.Integrated Parallel Connection Module: The built-in parallel connection module allows for seamless integration with numerous types of battery packs, optimizing power output and enhancing overall system efficiency for complex setups.

3.Compact and High-Efficiency Design: The compact form factor of the BMS facilitates easy integration into various applications without compromising performance, ensuring efficient space utilization and consistent energy management.

4.Comprehensive Temperature Control: The advanced thermal design ensures low temperature rise during operation, maintaining optimal performance and extending battery life by effectively managing heat dissipation.

5.Intelligent Monitoring and Communication: Featuring built-in bluetooth, RS485, and CAN communication interfaces, this BMS provides real-time monitoring and control through your smart device, enhancing user convenience and operational flexibility.

 

Package Included:

1 x S-type Smart BMS

2 x B-P- Output Line (gift)

1 x bluetooth Module (gift)

1 x Cables

1 x NTC

1 x CAN/485 5-pin


Installation and wiring in 3 easy steps:


Step 1: Solder the sampling cables: The first cable in black in the sampling cable set is connected to the negative terminal of the battery, the second cable (red) is connected to the positive terminal of the first string of batteries, and the third cable (red) is connected to the positive terminal of the second string of batteries. And so on, until all cables are connected.
Step 2: Check the cables: After connecting the cables, measure the voltage between two adjacent cables starting from the header to make sure there are no wrong connections or missing connections.
Step 3: Connect the output wires: Connect the B- wire of BMS to the total negative terminal of the battery pack, and then plug the sampling cable to BMS. After activating the BMS, make sure that the voltage (battery voltage) between B+ & B- and the voltage between P+ & P- are consistent.






Product Safety Information

Quick specs

Charging voltage(V)
LiFePO4: N (Battery string)*3.65V
Discharge current (A)
250 300 400 500
Discharge overcurrent protection value (A)
375 450 600 750
Charging current (A)
250 300 400 500
Charge overcurrent protection value (A)
375 450 600 750
Main circuit on-resistance (mΩ)
<10
See all specifications

More from DALY

View all →

Related Products

View all →