Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This module pairs a 5mm RGB LED with three onboard 150Ω resistors, so you can connect it straight to a 5V microcontroller without extra components. PWM control on each colour pin lets you mix millions of colours.

Key Highlights

  • 5mm RGB LED with common cathode driver
  • Three built-in 150Ω resistors prevent burnout
  • 5V working voltage for direct microcontroller connection
  • Compact 20mm × 15mm PCB with 1.5mm width
  • PWM control on each colour pin for colour mixing
  • Lightweight at only 5g

Ideal For

  • Arduino hobbyists adding RGB lighting to projects
  • Students learning about PWM and colour mixing
  • Makers building custom indicators or displays
  • Electronics enthusiasts creating decorative lighting
  • Prototypers needing a compact RGB LED solution

Buying Tip

Check that your microcontroller board has at least three PWM-capable pins available to control each colour channel independently.

Elecvora expert review

Our verdict

This module is a straightforward, well-designed solution for adding RGB lighting to 5V projects. The built-in resistors and common cathode layout make it beginner-friendly and reliable.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • No external resistors required
  • Compact and lightweight
  • Easy to wire with labelled pins
  • Works directly with 5V logic

Cons

  • Limited to 5V operation
  • Requires PWM-capable pins for full colour mixing
  • Pin labels may be small and require careful reading

Best for

Beginners and hobbyists wanting a simple RGB LED module for Arduino projects

Not ideal for

Projects requiring high-power LEDs or advanced lighting control

Specifications

Item TypeLED Module
Voltage Rating (V)5
LED Size (mm)RGB 5 mm
LED DriverCommon Cathode Driver
PCB Width (mm)1.5mm
Length (mm)20
Width (mm)15
Weight (g)5
Shipping Weight0.01 kg
Shipping Dimensions3 × 2 × 1 cm

What's in the box

  • 1 x DIP 3 Color LED Module

Frequently Asked Questions

Do I need to add resistors to this module?
No, the module already includes three 150Ω limiting resistors on the board, so you can connect it directly to your microcontroller.
What voltage does the module require?
The module is rated for 5V, making it suitable for most Arduino boards and other 5V logic systems.
Can I use this module with a 3.3V system?
The module is designed for 5V operation. Using it with a 3.3V system may result in reduced brightness and is not recommended without checking compatibility.
How do I control the colour?
Each colour channel (R, G, B) can be controlled independently using PWM signals. By adjusting the duty cycle on each pin, you can mix colours.
What is included in the package?
The package includes one DIP 3 Color LED Module.
Is the LED replaceable?
The LED is soldered onto the PCB and is not intended to be replaced. The module is designed as a single unit.

Overview

The DIP 3 Color LED Module is a ready-to-use breakout board that brings a 5mm RGB LED to your projects without the need for external resistors. Each colour channel—red, green and blue—has its own 150Ω limiting resistor on the board, protecting the LED from excessive current and simplifying wiring. The module operates at 5V and uses a common cathode configuration, meaning the negative terminal is shared while each colour is controlled independently. This makes it compatible with most microcontrollers and development boards that support PWM output.

Key Features

  • Integrated resistors: Three 150Ω resistors are built into the PCB, so you can connect the module directly to your microcontroller without adding external components.
  • 5mm RGB LED: The full-colour LED offers bright, distinct red, green and blue light that can be mixed to produce a wide spectrum of colours.
  • Common cathode driver: The shared cathode simplifies wiring and is ideal for projects where a common ground is used.
  • PWM colour mixing: By adjusting the pulse-width modulation signal on each colour pin, you can create custom colours and lighting effects.
  • Compact size: Measuring 20mm in length and 15mm in width with a 1.5mm PCB width, the module fits easily into small enclosures and tight spaces.

Specifications Explained

Voltage rating (5V): The module is designed to run on 5V, which is the standard logic level for many Arduino boards and similar microcontrollers. This means you can power it directly from the 5V pin without additional regulation.

LED size (RGB 5mm): The 5mm LED is a common size that provides a good balance between brightness and physical size, making it visible from a distance while still fitting into compact designs.

Common cathode driver: In a common cathode setup, the negative terminals of the three internal LEDs are connected together. You control each colour by applying a positive voltage (through PWM) to the corresponding anode pin. This is the most common configuration for RGB LEDs in hobbyist projects.

PCB width (1.5mm): The thin PCB profile allows the module to be mounted flush against surfaces or stacked in tight spaces.

Weight (5g): The low weight means the module won't add noticeable bulk to your project, and it can be mounted with minimal support.

Compatibility and Requirements

The module is designed for 5V systems and requires a microcontroller or development board with PWM-capable pins to achieve full colour mixing. It connects via four pins: one for each colour (R, G, B) and a common ground. No external resistors are needed, as they are already on the board. The module is compatible with popular platforms such as Arduino, though specific pin connections may vary by board. Always refer to your board's documentation for PWM pin availability.

Typical Uses

  • Status indicators for electronic devices
  • Decorative lighting effects in models and displays
  • Educational projects to teach PWM and colour mixing
  • DIY gadgets and prototypes requiring visual feedback
  • Mood lighting in small enclosures

What's in the Box

1 x DIP 3 Color LED Module.

DIP 3 Color LED Module

Quick specs

Item Type
LED Module
Voltage Rating (V)
5
LED Size (mm)
RGB 5 mm
LED Driver
Common Cathode Driver
PCB Width (mm)
1.5mm
Length (mm)
20
See all specifications