Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DWIN, this interface connector is a good fit for everyday home and hobby use. Main specs: manufacturer DWIN; model no. / name Adapter Board; power supply voltage (v) 5V 1A DC. Check that your power source supplies 5V 1A DC before connecting it.

Key Highlights

  • Manufacturer: DWIN
  • Model No. / Name: Adapter Board
  • Power Supply Voltage (V): 5V 1A DC

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerDWIN
Model No. / NameAdapter Board
Power Supply Voltage (V)5V 1A DC
PWN2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. The OS core can be controlled in real time via UART3.
Dimensions (L x W x H) mm63.50(W) ×40.64(H) × 8.60(T) mm
Weight (g)20g
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The DWIN DL662S Debugging Adapter Board, made by DWIN, is listed in our interface connector range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: DWIN
  • Model No. / Name: Adapter Board
  • Power Supply Voltage (V): 5V 1A DC (match this to your power supply; too high a voltage can damage the part)
  • PWN: 2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. The OS core can be controlled in real time via UART3.
  • Dimensions (L x W x H) mm: 63.50(W) ×40.64(H) × 8.60(T) mm (measure your mounting space before ordering)
  • Weight (g): 20g (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

DWIN DL662S Debugging Adapter Board is a USB debug adaptor that provides the interface between the PC’s USB port and the HDL662Sin-system debug/programming circuitry. The attached 10 pin debug ribbon cable connects the adapter to the target board and the target device’s debug interface signals. Power is provided to the adaptor from the USB connection to the PC. Note: For more technical details about the product, please go through the attachment section.

Features:

  1. Supports both Silicon Labs JTAG and C2 debug interfaces
  2. 10-pin debug ribbon cable connects the adapter to the target board
  3. USB powered
  4. Onboard Voltage Regulator
  5. 22 IOs, 3 UARTs, 1 CAN, 5 ADs, 2 PWM
  6. Onboard debugging and Project Uploading
  7. SD Card Read Slot available
  8. 2.54mm pitch on board SPI
  9. On-Board Buzzer
  10. USB Male Port for System and Board Connectivity
  11. USB cable is included as part of the USB Debug Adapter

Packages Includes:

1 x DWIN DL662S Debugging Adapter Board

Quick specs

Manufacturer
DWIN
Model No. / Name
Adapter Board
Power Supply Voltage (V)
5V 1A DC
PWN
2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. The OS core can be controlled in real time via UART3.
Dimensions (L x W x H) mm
63.50(W) ×40.64(H) × 8.60(T) mm
Weight (g)
20g
See all specifications