
1 / 3 · Click to enlarge
AI Summary
A compact SPWM driver board that produces a precise 50/60Hz pure sine wave reference for single-phase inverter builds. It combines the EG8010 controller with an IR2113 driver and adds voltage, current and temperature protection plus RS232 and LCD interfaces.
Key Highlights
- EG8010 ASIC with IR2113 gate driver for single-phase SPWM
- Selectable 50Hz or 60Hz AC output via jumper
- 23.4kHz PWM frequency with 12MHz crystal reference
- Overvoltage, undervoltage, overcurrent and overheating protection
- RS232 serial interface for voltage and frequency settings
- 128x32 serial LCD interface for on-board display function
Ideal For
- Power electronics engineers prototyping single-phase inverters
- Makers building custom UPS or off-grid inverter projects
- Students learning SPWM and pure sine wave generation
- Developers working on PV, wind or digital generator systems
- Technicians repairing or upgrading sine wave inverter driver stages
Buying Tip
Confirm you have the external power switches, transformer and 12MHz crystal circuit needed to complete the inverter, since this listing is the driver board only.
Elecvora expert review
Our verdict
The EGS002 packs the EG8010 controller and IR2113 driver into a small, well-featured board with useful protection and configuration options. It is a solid starting point for anyone building a single-phase pure sine wave inverter, provided they understand it is a driver stage and not a complete power unit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated overvoltage, undervoltage, overcurrent and overheating protection
- Jumper-configurable 50/60Hz output, soft start and dead time
- RS232 and LCD interfaces for setup and monitoring
- Compact board with fan control and LED warning indication
Cons
- Requires external power switches, transformer and crystal circuit to operate
- No onboard display or serial adapter included
- Documentation for jumper settings and wiring is essential for safe use
Best for
Engineers and makers prototyping single-phase pure sine wave inverters
Not ideal for
Plug-and-play users wanting a finished inverter with no external components
Specifications
| Item Type | Signal Generator |
|---|---|
| Output Frequency | 12MHz |
| PWM frequency | 23.4KHz |
| Frequency | 50/60Hz |
| Display | 128x32 Serial LCD Unit |
| Communication | RS232 Serial Communication |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 6 × 5 × 3 cm |
What's in the box
- 1 x EGS002 EG8010 IR2113 DC-AC SPWM Pure Sine Wave Inverter Board
Frequently Asked Questions
Is this a complete inverter?
Can I change the output frequency?
What protections are included?
What is the LCD interface for?
What is in the package?
What input voltage does it use?
Overview
The EGS002 is a driver board designed specifically for single-phase pure sine wave inverters. It pairs the EG8010 digital SPWM ASIC with an IR2113 driver chip to generate a clean, low-distortion sine wave reference at 50Hz or 60Hz. A 12MHz crystal oscillator provides the timing accuracy, while jumper settings let you choose output frequency, soft-start response and dead time. The board also integrates voltage, current and real-time temperature feedback, giving you the foundation for a protected inverter design without building the control stage from scratch.
Key Features
- EG8010 controller: integrates SPWM generation, dead-time control, range divider, soft-start and protection logic in one CMOS IC.
- IR2113 driver: provides the gate drive stage for the external power switches.
- Protection suite: overvoltage, undervoltage, overcurrent and overheating handling with LED warning indication and fan control.
- Configurable output: jumper-selectable 50/60Hz operation, soft-start mode and dead time.
- Digital interfaces: RS232 serial communication for parameter changes and a 128x32 serial LCD header for status display.
Specifications Explained
The 12MHz crystal reference is the time base for the EG8010, which uses it to produce a stable 50/60Hz sine output with low harmonic distortion. The 23.4kHz PWM frequency sits above the audible range, helping keep switching noise out of the output. Jumper-selected dead time prevents cross-conduction in the external bridge, and the soft-start setting controls how quickly the output ramps up. The RS232 link lets you set output voltage and frequency from a host, while the 128x32 LCD interface supports the chip's built-in display function for monitoring during development.
Compatibility and Requirements
This is a driver board, not a finished inverter. It requires external power switching devices, a suitable transformer or DC-DC stage, and a 12MHz crystal circuit as specified by the EG8010 design. Use the jumper settings to match your target 50Hz or 60Hz output and dead time. The RS232 and LCD interfaces are optional for basic operation but useful for configuration and monitoring.
Typical Uses
- Single-phase pure sine wave inverter prototyping
- PV and wind power inverter development
- UPS and digital generator systems
- Single-phase motor speed control and sine wave regulation
- Sine wave dimming and signal generation experiments
What's in the Box
1 x EGS002 EG8010 IR2113 DC-AC SPWM Pure Sine Wave Inverter Board.
Quick specs
- Item Type
- Signal Generator
- Output Frequency
- 12MHz
- PWM frequency
- 23.4KHz
- Frequency
- 50/60Hz
- Display
- 128x32 Serial LCD Unit
- Communication
- RS232 Serial Communication













