Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The OWON HDS272S is a handheld 70 MHz dual-channel oscilloscope with a 3.5-inch color LCD and 250 MSa/s sample rate. Its compact form makes it easy to take signal analysis into the field or onto the production floor.

Key Highlights

  • 70 MHz bandwidth with two channels for simultaneous signal comparison
  • 250 MSa/s sample rate captures fast waveform details
  • 3.5-inch color LCD with 320 x 240 pixel resolution
  • Handheld design for portable field and lab use
  • 1 MΩ input impedance for standard probing
  • Wide 100-240 VAC power supply for international use

Ideal For

  • Electronics technicians doing field service and installation
  • Hobbyists and makers who need portable signal analysis
  • Engineering students learning oscilloscope fundamentals
  • Production line staff for quick signal checks
  • Field engineers troubleshooting electronic systems on site

Buying Tip

Confirm that the included accessory kit contains the probes and adapters you need for your typical measurements, as the kit contents are as shown in the product image.

Elecvora expert review

Our verdict

The OWON HDS272S offers a practical balance of portability and core oscilloscope capability for technicians who need to take measurements outside the lab. Its dual-channel 70 MHz front end and clear color display make it a capable companion for field diagnostics and general signal inspection.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Handheld design is easy to carry and use in tight spaces
  • Dual channels allow simultaneous signal comparison
  • 70 MHz bandwidth covers many common electronics signals
  • Clear 3.5-inch color LCD for waveform viewing
  • Wide 100-240 VAC input suits international use

Cons

  • Sample rate of 250 MSa/s may limit detail on very fast signals
  • No battery or internal power source is specified, so mains power is required
  • Accessory kit contents are only as shown in the image, so check probes before purchase

Best for

Field technicians and hobbyists needing portable dual-channel signal analysis

Not ideal for

High-frequency RF or advanced research measurements requiring higher bandwidth and sample rates

Specifications

Item TypeOscilloscope
No. of Channels2
Model No. / NameHDS272S
Power Supply Voltage (V)100 - 240 VACRMS
Bandwidth70
Sample Rate250MSa/s
Power Consumption (W)<5W
Display Type3.5-inch Color LCD Display
Display Resolution (pixel)320 H x 240 V Pixels
Operating Temperature (°C)0 to 40
Storage Temperature (°C)-20 to +60 deg C
Dimensions (L x W x H) mm198 x 38 x 96
Impedance (Ω)(At Input) 1 MΩ±2%
Shipping Weight1.082 kg
Shipping Dimensions25 × 17 × 9 cm

What's in the box

  • 1 x OWON HDS272S Handheld Digital Oscilloscope
  • 1 x Accessories kit as shown in the image

Frequently Asked Questions

What is the bandwidth of the OWON HDS272S?
The HDS272S has a bandwidth of 70 MHz, which determines the range of signal frequencies it can accurately display.
Can I use both channels at the same time?
Yes, the oscilloscope has two channels, so you can monitor and compare two signals simultaneously.
What power source does it require?
It operates from a mains supply of 100-240 VACRMS and consumes less than 5 W. No internal battery is specified.
What is included in the package?
The package includes the OWON HDS272S oscilloscope and an accessories kit as shown in the product image.
What is the input impedance?
The input impedance is 1 MΩ ±2%, which is standard for oscilloscopes and minimizes loading on most circuits.
What are the operating temperature limits?
The oscilloscope can operate between 0 °C and 40 °C and can be stored between -20 °C and +60 °C.

Overview

The OWON HDS272S is a handheld digital oscilloscope that brings dual-channel signal analysis to locations where benchtop instruments are impractical. With 70 MHz bandwidth and a 250 MSa/s sample rate, it is suited to viewing and measuring waveforms in electronic circuits, from low-frequency control signals to faster digital edges. The 3.5-inch color LCD provides a clear view of traces, and the handheld format means you can carry it between work areas without sacrificing core oscilloscope functions.

Key Features

  • Dual-channel input: Monitor and compare two signals at the same time, which is useful for checking timing relationships or signal paths.
  • 70 MHz bandwidth: Covers a broad range of common electronics signals while keeping the instrument compact.
  • 250 MSa/s sample rate: Provides enough sampling density to capture waveform shape on fast-changing signals.
  • 3.5-inch color LCD: Displays waveforms at 320 x 240 pixels for straightforward reading of amplitude and time relationships.
  • Portable handheld body: Measuring 198 x 38 x 96 mm, it fits comfortably in hand and is easy to transport.
  • Flexible power input: Accepts 100-240 VACRMS and consumes under 5 W, making it usable in different regions.

Specifications Explained

Bandwidth (70 MHz): This is the frequency range over which the oscilloscope can accurately display signals. It is adequate for many audio, control, and moderate-speed digital circuits. Sample rate (250 MSa/s): Higher sample rates allow better resolution of fast transitions; 250 MSa/s supports viewing signals with meaningful detail up to the bandwidth limit. Channels (2): Two inputs let you view two waveforms simultaneously, which is essential for comparing input and output signals or checking phase relationships. Input impedance (1 MΩ ±2%): A standard high impedance that minimizes loading on most circuits under test. Display (3.5-inch color LCD, 320 x 240): Shows waveforms and menus clearly in a compact size. Power (100-240 VACRMS, <5 W): Operates from a wide range of mains voltages with low power draw.

Compatibility and Requirements

The HDS272S is designed for use with standard oscilloscope probes and accepts signals via its two input channels. It requires a mains power source within 100-240 VACRMS. No other compatibility details are specified. Operating temperature range is 0 to 40 °C, and storage temperature range is -20 to +60 °C.

Typical Uses

  • Field troubleshooting of electronic systems and wiring
  • Circuit debugging and signal tracing on production floors
  • Educational demonstrations and hobbyist projects
  • Comparing two signals for timing or amplitude analysis
  • Portable diagnostics where a benchtop scope is not practical

What's in the Box

1 x OWON HDS272S Handheld Digital Oscilloscope, 1 x Accessories kit as shown in the image.

Quick specs

Item Type
Oscilloscope
No. of Channels
2
Model No. / Name
HDS272S
Power Supply Voltage (V)
100 - 240 VACRMS
Bandwidth
70
Sample Rate
250MSa/s
See all specifications

More from OWON

View all →

Related Products

View all →