Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Owon VDS1022 is a USB-powered PC oscilloscope with 25MHz bandwidth, 2+1 channels, and 100MSa/s sample rate. It turns your laptop into a compact, portable test bench for waveform viewing and circuit debugging.

Key Highlights

  • 25MHz bandwidth and 100MSa/s sample rate for general electronics work
  • 2+1 channel configuration with a multi-function interface for trigger or pass/fail
  • 40V peak-to-peak maximum input voltage (DC+AC)
  • USB 2.0 isolated communication reduces interference and protects the PC
  • Ultra-thin 18mm body and lightweight 0.26kg design for easy portability
  • 8-bit vertical resolution with 5mV/div to 5V/div sensitivity range

Ideal For

  • Electronics hobbyists and makers
  • Students learning circuit analysis
  • Field technicians needing a portable scope
  • Audio enthusiasts inspecting signals
  • Anyone with limited bench space

Buying Tip

Check that your computer has a USB 2.0 port and that you are comfortable using PC-based software, as the VDS1022 relies on your computer for display and control.

Elecvora expert review

Our verdict

The Owon VDS1022 offers a practical entry into PC-based oscilloscopes with a useful 2+1 channel setup and a compact, USB-powered design. It is a sensible choice for low-voltage electronics work where portability and budget matter more than high-end specifications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact and lightweight for easy portability
  • USB-powered with isolated communication for safety
  • 2+1 channels with multi-function port adds flexibility
  • Good set of trigger and acquisition modes for the class

Cons

  • Requires a computer to operate; no standalone display
  • 25MHz bandwidth limits high-frequency measurements
  • No built-in battery, so it relies on USB power

Best for

Hobbyists, students, and technicians working on low-voltage electronics who need a portable and affordable scope.

Not ideal for

Engineers needing high bandwidth, deep memory, or standalone operation for advanced signal analysis.

Specifications

Model No. / NameOwon VDS1022
Bandwidth25
Sample Rate100MS/s
Power Supply Voltage (V)5.0V/1A
Shipping Weight0.000499 kg
Shipping Dimensions25 × 15 × 8 cm

What's in the box

  • 1 x Owon VDS1022 2+1 Channel PC Oscilloscope
  • 1 x CD
  • 1 x Quick Guide
  • 2 x Oscilloscope probes
  • 1 x USB cable

Frequently Asked Questions

Does the VDS1022 require a separate power supply?
No, it is powered through the USB connection from your computer. It requires a 5.0V/1A USB source and consumes 2.5W or less.
What is the maximum input voltage?
The maximum input voltage is 40V peak-to-peak (DC+AC). Do not exceed this level on the input channels.
Can I use the VDS1022 with a laptop?
Yes, as long as the laptop has a USB 2.0 port and you install the provided software. The scope communicates via an isolated USB 2.0 interface.
What is included in the package?
The package includes the VDS1022 oscilloscope, a CD with software, a quick guide, two oscilloscope probes, and a USB cable.
What is the multi-function port used for?
The multi port can be configured for external triggering, trigger output, or pass/fail output, depending on your needs.
How do I care for the oscilloscope?
Keep it dry, avoid exceeding the maximum input voltage, and store it in a clean, dry place. Use the supplied probes and cable for best results.

Overview

The Owon VDS1022 is a PC-based oscilloscope that connects to your computer via USB and displays waveforms on the screen you already own. With 25MHz bandwidth, a 100MSa/s sample rate, and a 2+1 channel configuration, it provides a practical way to inspect signals, debug circuits, and learn about electronics without dedicating a large amount of bench space or budget to a standalone instrument. The scope is powered from a 5V/1A USB supply and consumes no more than 2.5W, so it is well suited to portable setups and shared work areas.

Key Features

  • 2+1 channel architecture: two analog channels plus a multi-function port that can be configured for external triggering, trigger output, or pass/fail signalling.
  • 25MHz bandwidth and 100MSa/s sample rate: adequate for audio, low-frequency digital, and many general-purpose troubleshooting tasks.
  • 40V maximum input: accepts up to 40V peak-to-peak (DC+AC) on the input channels, giving headroom for common low-voltage circuits.
  • Shielded USB 2.0 connection: helps reduce interference and protects the host computer from over-voltage events.
  • Flexible triggering and acquisition: edge, pulse, video, slope, and alternate trigger types; auto, normal, and single trigger modes; sample, peak detect, and average acquisition modes.
  • Waveform math: add, subtract, multiply, divide, invert, and FFT analysis for deeper signal inspection.
  • Compact and lightweight: measures 170 × 120 × 18mm and weighs 0.26kg, making it easy to store and carry.

Specifications Explained

Bandwidth (25MHz): the maximum frequency the input circuitry can handle while still showing a useful waveform. Signals well below 25MHz will be displayed with good fidelity, while higher-frequency content will be attenuated.

Sample rate (100MSa/s): the number of samples captured per second. A higher sample rate allows better resolution of fast-changing signals. At 100MSa/s, the scope can capture repetitive signals up to its bandwidth limit.

Vertical resolution (8 bits): each sample is digitised to 8 bits, giving 256 vertical levels. This is standard for entry-level scopes and is sufficient for most general measurements.

Vertical sensitivity (5mV/div to 5V/div): the range of signal amplitudes you can display. Lower settings are useful for small signals, while higher settings accommodate larger voltages.

Horizontal scale (5ns/div to 100s/div): the time base range, allowing you to zoom in on fast events or observe slow-changing signals over long periods.

Maximum input voltage (40V PK-PK, DC+AC): do not exceed this level on the input channels. It is suitable for low-voltage electronics but not for mains or high-energy circuits.

Record length (5K): the number of samples stored per acquisition. This affects the amount of detail available when zooming into a captured waveform.

Compatibility and Requirements

The VDS1022 communicates with a computer through an isolated USB 2.0 interface. It is powered from a 5.0V/1A USB source and consumes 2.5W or less. The package includes a CD with software and a quick guide. No specific operating system requirements are stated in the product data; refer to the included documentation for software installation details.

Typical Uses

  • Debugging low-voltage digital and analog circuits
  • Educational demonstrations and electronics learning
  • Audio signal inspection and waveform analysis
  • Hobbyist projects involving microcontrollers and sensors
  • Field or mobile testing where a laptop is available

What's in the Box

  • 1 x Owon VDS1022 2+1 channel PC oscilloscope
  • 1 x CD (software)
  • 1 x Quick Guide
  • 2 x Oscilloscope probes
  • 1 x USB cable

Quick specs

Model No. / Name
Owon VDS1022
Bandwidth
25
Sample Rate
100MS/s
Power Supply Voltage (V)
5.0V/1A
Shipping Weight
0.000499 kg
Shipping Dimensions
25 × 15 × 8 cm
See all specifications

More from OWON

View all →

Related Products

View all →