
1 / 4 · Click to enlarge
AI Summary
The SG-002 is a portable analog signal generator that outputs 0-12V or 0-24mA for PLC and panel debugging. Its rotary encoder and multi-mode display make precise signal simulation quick and easy.
Key Highlights
- Generates 0-12V voltage and 0-24mA current signals
- Rotary encoder knob for precise adjustment
- Switchable display: voltage, current, percent, frequency
- Powered by external micro USB 5V supply
- Compact 100 x 70 mm board for easy handling
- Calibratable outputs for accurate testing
Ideal For
- PLC programmers and control system technicians
- Industrial maintenance and panel builders
- Electronics hobbyists testing analog circuits
- Field service engineers working with frequency converters
- Students learning about industrial control signals
Buying Tip
Remember to have a micro USB 5V power source ready, as neither a battery nor a USB adapter is included with the module.
Elecvora expert review
Our verdict
The SG-002 is a handy, low-cost tool for anyone who needs to inject analog signals during PLC or panel work. Its compact size and simple encoder control make it easy to carry and use in the field.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dual voltage and current output in one device
- Clear multi-mode display with percentage and frequency
- Portable and lightweight design
- Simple rotary encoder adjustment
- Calibratable for better accuracy
Cons
- Requires an external micro USB power source (not included)
- No battery included, so it is not fully wireless out of the box
- Limited to 0-12V and 0-24mA ranges, not suitable for higher voltage systems
Best for
Technicians and engineers debugging PLCs and control panels
Not ideal for
Applications requiring high voltage or high current outputs beyond 12V/24mA
Specifications
| Item Type | Signal Generator |
|---|---|
| Operating Voltage (VDC) | 12 |
| Power Supply Voltage (V) | external micro USB-5V |
| Length (mm) | 100 |
| Width (mm) | 70 |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 10 × 8 × 4 cm |
What's in the box
- 1 x SG-002 Analog 0-12V 0-24mA Signal Generator
Frequently Asked Questions
What power source does the SG-002 need?
Can I use the SG-002 to test a 4-20mA loop?
Does the display show both voltage and current at the same time?
Is the output calibrated from the factory?
What is included in the package?
Can I connect the output directly to a PLC input?
Overview
The SG-002 is a compact analog signal generator built for professionals who commission, troubleshoot, or test control systems. It simulates two of the most common industrial signals: a 0-12V voltage output and a 0-24mA current output. Whether you are verifying a PLC input card, exercising a panel meter, or checking a frequency converter, this module gives you a straightforward way to inject a known signal without carrying bulky bench equipment.
All adjustments are made with a single rotary encoder knob, and a small push button cycles the display through voltage, current, percentage, and frequency readouts. The board is powered from an external micro USB 5V source, so you can use a phone charger, power bank, or USB port on a laptop. Note that a 3.7V battery is not included.
Key Features
- Dual signal output: 0-12V voltage and 0-24mA current, each adjustable with 0.01 resolution.
- Encoder control: Rotate the knob to fine-tune the output; both voltage and current outputs can be calibrated.
- Multi-mode display: Push the button to switch between voltage, current, 0-100%, and 0-50Hz views.
- USB powered: Operates from an external micro USB 5V supply for portability.
- Compact size: 100mm x 70mm board footprint, easy to fit in a tool bag or on a workbench.
Specifications Explained
Operating voltage: The module requires a 12V DC operating voltage, but it is powered through the micro USB 5V input. This means the internal circuitry runs from USB power, while the 12V figure likely refers to the maximum output voltage range. Always use a stable 5V USB source.
Voltage output (0-12V): The output can be set from 0 to 12V in 0.01V steps. This range covers common analog control signals for PLCs, variable frequency drives, and valve positioners.
Current output (0-24mA): The current loop output spans 0 to 24mA, also with 0.01mA resolution. The 24mA upper limit gives a small over-range margin beyond the standard 20mA, useful for testing loop fault detection.
Display modes: Besides direct voltage and current readings, the display can show 0-100% (useful for proportional valve or damper testing) and 0-50Hz (for frequency converter checks).
Dimensions: The board measures 100mm x 70mm, with a shipping weight of just 0.04kg, making it highly portable.
Compatibility and Requirements
The SG-002 is intended for use with PLC systems, industrial control panels, frequency converters, flow valves, and other devices that accept analog voltage or current signals. It requires an external micro USB 5V power supply, which is not included. A 3.7V battery is also not included. No other compatibility information is provided; always verify that your target device accepts the signal range before connecting.
Typical Uses
- Simulating sensor signals during PLC program debugging
- Testing panel meters, indicators, and analog input cards
- Commissioning frequency converters and flow valves
- Calibrating or verifying 0-10V and 4-20mA control loops
- Educational and hobby electronics projects requiring a variable signal source
What's in the Box
Package includes: 1 x SG-002 Analog 0-12V 0-24mA Signal Generator. No USB power supply, cables, or battery are included.
Quick specs
- Item Type
- Signal Generator
- Operating Voltage (VDC)
- 12
- Power Supply Voltage (V)
- external micro USB-5V
- Length (mm)
- 100
- Width (mm)
- 70
- Shipping Weight
- 0.04 kg













