
1 / 5 · Click to enlarge
At a glance
Made by ELECROW, this elecrow crowtail module is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage 5V/3.3V; connector type Crowtail; compatibility Arduino/Crowduino. Check that your power source supplies 5V/3.3V before connecting it.
Key Highlights
- Operating Voltage: 5V/3.3V
- Connector Type: Crowtail
- Compatibility: Arduino/Crowduino
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage | 5V/3.3V |
|---|---|
| Connector Type | Crowtail |
| Compatibility | Arduino/Crowduino |
| Length (mm) | 28 |
| Width (mm) | 20 |
| Shipping Weight | 0.012 kg |
| Shipping Dimensions | 19 × 7 × 3 cm |
Overview
The Elecrow Crowtail - Collision Sensor 2.0, made by ELECROW, is listed in our elecrow crowtail module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage: 5V/3.3V (match this to your power supply; too high a voltage can damage the part)
- Connector Type: Crowtail (confirm your cable or board uses the same connector)
- Compatibility: Arduino/Crowduino
- Length (mm): 28 (measure your mounting space before ordering)
- Width (mm): 20 (measure your mounting space before ordering)
- Shipping Weight: 0.012 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 19 × 7 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Elecrow Crowtail - Collision Sensor 2.0 is a Robot model car crash or collision switch sensor module for Arduino, it normally outputs high voltage, but when the sensor is carsh something such as the wall, the on-board switch will be pressed, and the module outputs low. This module can be installed into any mobile platform to achieve collision detection function via 3P sensor cable and Arduino-compatible sensor expansion board connector. Its working voltage is 5v which make it compatible with standard Arduino-compatible/Crowduino 5V systems. It has Crowtail interface for plugging onto the Crowtail-base board.
Features:
- Light & Luminance Sensors: Detect light intensity.
- Vibration Sensor: Detects movement/vibrations.
- Wide power supply range DC3.3V to 5V.
- High sensitive
Package Includes:
1 x Crowtail- collision sensor
Quick specs
- Operating Voltage
- 5V/3.3V
- Connector Type
- Crowtail
- Compatibility
- Arduino/Crowduino
- Length (mm)
- 28
- Width (mm)
- 20
- Shipping Weight
- 0.012 kg


















