Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The ELECROW Crowtail Flame Sensor 2.0 detects flames and infrared light from 760 to 1100 nm using a sensitive YG1006 phototransistor. Its adjustable sensitivity and Crowtail-compatible interface make it easy to add flame-finding or flame-avoidance to robotics projects.

Key Highlights

  • Detects flames and IR light sources in the 760–1100 nm range
  • Uses high-speed, high-sensitivity YG1006 NPN silicon phototransistor
  • Black epoxy coating improves infrared detection
  • Adjustable sensitivity via onboard potentiometer
  • Crowtail-compatible interface for simple wiring
  • Compact 32 × 20 mm board operates at 5V

Ideal For

  • Robotics hobbyists building firefighting robots
  • Students learning about infrared sensors
  • Makers adding flame-avoidance to smart cars
  • Educators creating electronics workshops
  • DIY enthusiasts needing a compact flame detector

Buying Tip

Check that your project uses a 5V logic supply and that you have a Crowtail-compatible cable or adapter, since the module's interface is designed for Crowtail systems.

Elecvora expert review

Our verdict

The ELECROW Crowtail Flame Sensor 2.0 is a well-built, straightforward module that does exactly what it promises: detect flames and IR sources with adjustable sensitivity. Its Crowtail interface simplifies wiring, making it a solid pick for robotics projects that need reliable flame detection.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple Crowtail-compatible connection
  • Adjustable sensitivity for different environments
  • High-sensitivity YG1006 phototransistor
  • Compact and lightweight design

Cons

  • Requires a 5V supply, which may not suit 3.3V systems
  • Crowtail cable not included
  • Detection can be affected by other strong IR sources

Best for

Firefighting robot competitions and flame-avoidance projects

Not ideal for

Projects requiring precise temperature measurement or non-IR flame detection

Specifications

Operating Voltage (VDC)5V
Length (mm)32
Width (mm)20
Shipping Weight0.009 kg
Shipping Dimensions8 × 7 × 2 cm

What's in the box

  • 1 x Elecrow Crowtail Flame Sensor

Frequently Asked Questions

What wavelength range does this sensor detect?
It detects light in the 760 nm to 1100 nm range, which covers near-infrared emissions from flames and other IR sources.
Can I use this sensor with a 3.3V microcontroller?
The sensor is specified for 5V operation. Using it with a 3.3V system may require level shifting or a separate 5V supply.
Is the sensitivity adjustable?
Yes, there is an onboard potentiometer that lets you adjust the detection threshold to suit your environment.
What is included in the package?
The package includes one Elecrow Crowtail Flame Sensor. A Crowtail cable is not included.
Can this sensor detect candles or lighters?
Yes, it can detect small flames like candles or lighters as long as they emit sufficient infrared in the 760–1100 nm range and are within the adjusted detection distance.
How do I care for the sensor?
Keep the sensor clean and dry, avoid exposing it to excessive heat or moisture, and store it in a static-safe environment when not in use.

Overview

The ELECROW Crowtail Flame Sensor 2.0 is a small, ready-to-use infrared detection module designed for robotics and electronics projects. At its core is the YG1006 NPN silicon phototransistor, a component selected for fast response and high sensitivity to infrared radiation. The sensor's black epoxy housing filters and enhances IR reception, allowing it to pick up flames and other light sources that emit in the 760–1100 nm wavelength band.

Because the board uses a Crowtail-compatible interface, connecting it to supported microcontroller boards is quick and requires no custom adapter. An onboard potentiometer gives you direct control over detection sensitivity, so you can tune the module to your specific environment and distance requirements.

Key Features

  • Flame and IR detection: Senses fire and other light sources between 760 nm and 1100 nm.
  • High sensitivity: The YG1006 phototransistor provides fast, reliable response to infrared.
  • Infrared enhanced: Black epoxy coating boosts the sensor's ability to capture IR radiation.
  • Adjustable sensitivity: A trim potentiometer lets you set the detection threshold.
  • Crowtail compatible: Plugs into Crowtail systems without extra wiring.
  • Compact size: Measures 32 mm × 20 mm and weighs only 9 g for shipping.

Specifications Explained

Operating voltage (5V): The module is designed for 5V DC power, which is common on many development boards and robotics platforms. Make sure your supply matches this to avoid damage.

Dimensions (32 mm × 20 mm): The small footprint means the sensor can fit into tight spaces on a robot chassis or inside a project enclosure.

Wavelength range (760–1100 nm): This is the near-infrared spectrum. Flames emit strongly in this range, so the sensor can distinguish a fire source from ambient visible light in many cases.

Compatibility and Requirements

The Crowtail-compatible interface allows direct connection to Crowtail-ready boards and shields. You will need a 5V power source and a microcontroller capable of reading the sensor's output. No additional components are required for basic operation, though you may need a Crowtail cable (not included) to connect the module to your system.

Typical Uses

  • Firefighting robot competitions where the robot must locate a flame.
  • Flame-avoidance systems for smart cars and mobile robots.
  • Educational projects demonstrating infrared detection.
  • DIY safety devices that trigger an alert when a flame is present.

What's in the Box

1 × Elecrow Crowtail Flame Sensor.

Quick specs

Operating Voltage (VDC)
5V
Length (mm)
32
Width (mm)
20
Shipping Weight
0.009 kg
Shipping Dimensions
8 × 7 × 2 cm
See all specifications