Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Genuine Emax 12A BLHeli ESC with Oneshot for multi-rotor and RC plane. Offers 12A constant current, 5V/1A BEC, 2S-4S LiPo support, and programmable settings via card or transmitter.

Key Highlights

  • 12A constant current, 15A burst for short peaks
  • Built-in 5V/1A BEC powers receiver or flight electronics
  • BLHeli firmware for smooth linear throttle response
  • Supports 2S to 4S LiPo batteries
  • Programmable via programming card or transmitter
  • Compact and lightweight: 44mm long, 15g

Ideal For

  • FPV pilots building small multi-rotors
  • RC plane hobbyists needing a compact ESC
  • Drone builders looking for genuine Emax components
  • Hobbyists upgrading to BLHeli firmware

Buying Tip

Confirm your motor's maximum current draw stays below 12A continuous and your battery is within 2S-4S to avoid overloading the ESC.

Elecvora expert review

Our verdict

The Emax BLHeli 12A ESC offers reliable performance and genuine components for small multi-rotor and fixed-wing models. Its BLHeli firmware and OneShot support provide smooth control, while the built-in BEC simplifies setup.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Genuine Emax quality with authentic components
  • BLHeli firmware for smooth throttle response
  • Integrated 5V/1A BEC reduces wiring
  • Compact and lightweight design
  • Multiple protection features

Cons

  • Requires soldering for connections
  • Limited to 4S LiPo maximum
  • BEC output may be insufficient for high-power servos

Best for

Small multi-rotors and RC planes with 2S-4S batteries

Not ideal for

High-current applications or large aircraft requiring more than 12A continuous

Specifications

Item TypeBrushless ESC
Model No. / NameEmax BLHeli Series 12A ESC
Burst Current (A)15
Constant Current (A)12
BEC (Y/N)Yes, (5V/1A)
Compatible LiPO Batteries2S to 4S
ColorBlack
ApplicationMulti-roter, Rc Plane etc.
Length (mm)44
Width (mm)20
Weight (g)15
Shipping Weight0.018 kg
Shipping Dimensions8 × 8 × 4 cm

What's in the box

  • 1 x Emax BLHeli Series 12A ESC with Oneshot (Original)

Frequently Asked Questions

What is the maximum battery voltage this ESC can handle?
It supports 2S to 4S LiPo batteries, so the maximum is 4S (16.8V fully charged).
Can I program this ESC without a programming card?
Yes, many parameters can be set using your transmitter, but a programming card offers more convenience.
Does this ESC have a built-in BEC?
Yes, it includes a 5V/1A linear BEC to power your receiver or flight electronics.
What is included in the package?
The package includes one Emax BLHeli Series 12A ESC with Oneshot (Original).
Is OneShot supported?
Yes, this ESC supports OneShot for faster communication with compatible flight controllers.
What protections are built in?
It features low-voltage cutoff, over-heat protection, and throttle signal loss protection.

Overview

The Emax BLHeli Series 12A ESC with Oneshot is a genuine brushless speed controller built for multi-rotor and fixed-wing RC aircraft. It combines a 12A constant current rating with a 15A burst capability, making it suitable for small drones and planes that require reliable power delivery. The integrated 5V/1A BEC provides a stable power source for receivers and other onboard electronics, simplifying wiring. Based on BLHeli firmware, this ESC is optimized for smooth, linear throttle response and quick acceleration, giving pilots precise control.

Key Features

  • BLHeli firmware: Optimized for high performance and linearity, with faster throttle response.
  • Programmable: Adjust settings such as motor rotation direction (normal, reverse, or bi-directional) using a programming card or transmitter.
  • Protection features: Low-voltage cutoff, over-heat protection, and throttle signal loss protection help safeguard your equipment.
  • Separate power supply: MCU and BEC have independent power supplies to reduce magnetic interference.
  • OneShot support: Enables faster communication with compatible flight controllers.
  • Compact design: Measures 44mm x 20mm and weighs only 15g, easy to fit in tight builds.

Specifications Explained

Current rating: The 12A constant current means the ESC can handle continuous loads up to 12 amps, while the 15A burst rating covers brief spikes during aggressive maneuvers. BEC: The built-in 5V/1A linear BEC supplies power to your receiver or flight controller, eliminating the need for a separate BEC in many setups. LiPo compatibility: Works with 2S to 4S LiPo batteries, giving flexibility across different voltage setups. Programming: Throttle range and other parameters can be set via a programming card or transmitter, allowing you to match the ESC to your radio system. Motor speed: Supports up to 210,000 RPM for 2-pole motors, 70,000 RPM for 6-pole, and 35,000 RPM for 12-pole motors.

Compatibility and Requirements

This ESC is compatible with multi-rotors, RC planes, and helicopters. It requires a brushless motor and a LiPo battery within the 2S to 4S range. A compatible receiver and transmitter are needed for control, and a programming card or transmitter for configuration. Ensure the motor's current draw does not exceed the ESC's continuous rating.

Typical Uses

Ideal for small FPV quadcopters, park flyers, and other electric RC models where weight and space are limited. The OneShot support makes it a good match for modern flight controllers in drone applications.

What's in the Box

  • 1 x Emax BLHeli Series 12A ESC with Oneshot (Original)
Emax BLHeli Series 12A ESC with Oneshot

Quick specs

Item Type
Brushless ESC
Model No. / Name
Emax BLHeli Series 12A ESC
Burst Current (A)
15
Constant Current (A)
12
BEC (Y/N)
Yes, (5V/1A)
Compatible LiPO Batteries
2S to 4S
See all specifications