
1 / 5 · Click to enlarge
AI Summary
EMAX MT2213 935KV brushless motor supplied in CW rotation with a matched 1045 propeller combo. It delivers up to 840 g thrust on 3S-4S LiPo with an 18A ESC, making it a practical choice for endurance multirotor builds.
Key Highlights
- 935 KV brushless outrunner tuned for endurance multirotor setups
- 840 g maximum thrust per motor for stable lift
- Runs on 3S to 4S LiPo packs with an 18A ESC
- 12N14P framework with high-purity copper windings
- Accepts 8 to 10 inch propellers; 1045 prop included
- CW rotation with black cap and left-handed thread
Ideal For
- Hobbyists building endurance-focused multirotors
- Makers assembling a general-purpose quadcopter
- Builders refreshing motors on an existing frame
- Pilots who prefer a matched motor and propeller combo
- DIY drone projects using 3S or 4S LiPo packs
Buying Tip
Check your frame's rotation layout before ordering, because this is the CW motor with a left-handed thread and you will need the CCW version for the opposite arm.
Elecvora expert review
Our verdict
The MT2213 935KV is a sensible, no-drama motor for endurance-style multirotors, and bundling a 1045 prop makes the first build step easier. It rewards builders who plan their rotation layout and ESC choice rather than chasing maximum power.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Moderate 935 KV suits larger props and steady flight
- 840 g thrust gives useful lift margin
- Includes a matched 1045 propeller
- 3S to 4S support covers common packs
- Light 53 g motor with compact dimensions
Cons
- Requires a separate 18A ESC per motor
- Only one rotation direction is supplied in this listing
- Soldering motor leads is typically required
Best for
Endurance and general-purpose multirotor builds
Not ideal for
High-rpm acro builds needing very high KV motors
Specifications
| Motor KV (RPM/V) | 935 KV |
|---|---|
| Motor Type | Brushless Motor |
| Compatible LiPO Batteries | 3S to 4S |
| Model No. / Name | M2213 |
| Maximum Thrust (gm) | 840 |
| Required ESC (A) | 18 |
| Framework | 12N14P |
| Compatible Prop (inch) | 8 ~ 10 |
| Length (mm) | 39.5 |
| Width (mm) | 28 |
| Weight (g) | 53 |
| Shipping Weight | 0.07 kg |
| Shipping Dimensions | 30 × 5 × 3 cm |
What's in the box
- 1 x EMAX MT2213 935KV Brushless DC Motor
- 1 x Pair of 1045 Propellers and accessories
Frequently Asked Questions
What battery should I use with this motor?
Which ESC do I need?
What propellers fit this motor?
Is this the clockwise or counter-clockwise motor?
What is included in the package?
How much thrust can it produce?
Overview
The EMAX MT2213 is a brushless DC outrunner motor rated at 935 KV and supplied here as a combo with a 1045 propeller. This version uses a black cap and CW motor rotation, which means the thread tightens in the opposite direction to the motor's spin. It is a practical building block for multirotor projects where smooth, efficient lift matters, and the included propeller removes the guesswork of matching a prop to the motor.
Key Features
- 935 KV winding for endurance-focused multirotor builds
- 12N14P stator framework for smooth, vibration-free running
- Windings made from high-purity copper
- Highest grade neodymium magnets inside
- Designed to generate less heat during operation
- Straightforward to install on standard motor mounts
Specifications Explained
935 KV describes revolutions per volt: on a 3S or 4S pack the motor turns at a moderate speed, which suits larger props and steadier flight rather than high-rpm acro flying.
840 g maximum thrust is the peak pull the motor can produce with a suitable propeller, giving you a figure to work from when estimating all-up weight and thrust margin.
18A ESC requirement sets the minimum rating for the speed controller you pair with each motor; choose ESCs rated at or above this figure.
12N14P refers to 12 stator slots and 14 magnets, a common configuration that contributes to smooth rotation. At 53 g with a 39.5 mm length and 28 mm width, the motor is compact enough for many frame sizes.
Compatibility and Requirements
Use 3S to 4S LiPo batteries and an 18A ESC per motor. Propellers from 8 to 10 inches are supported, and a 1045 prop is included in this combo. Note the rotation direction: this is a CW rotating motor, so its thread tightens in the CW direction (left-handed thread). Builds that need the opposite rotation require the CCW version.
Typical Uses
This motor suits endurance-oriented multirotors, general-purpose quad builds, and projects where a matched motor and propeller pair simplifies assembly. It is a reasonable fit for hobbyists upgrading an existing frame or starting a build with steady flight in mind.
What's in the Box
- 1 x EMAX MT2213 935KV brushless DC motor
- 1 x pair of 1045 propellers with accessories
Quick specs
- Motor KV (RPM/V)
- 935 KV
- Motor Type
- Brushless Motor
- Compatible LiPO Batteries
- 3S to 4S
- Model No. / Name
- M2213
- Maximum Thrust (gm)
- 840
- Required ESC (A)
- 18
Frequently Bought Together

SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
$8.99
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
$13.99
F450 / Q450 Quadcopter Frame(PCB Version with Integrated PCB) + Plastic Landing Gear Combo Kit – Made in INDIA
$14.99
EMAX MT2213 935KV Brushless DC Motor for Drone – Red Cap (CCW) With 1045 Propeller Combo (Original)
$20.99
Emax BLHeli Series 30A ESC with Oneshot (Original)
$25.99
Emax SimonK Series Multirotor 30A Brushless ESC (Original)
$24.99

















