
1 / 7 · Click to enlarge
AI Summary
The Emax MT2213 is a 935KV CCW brushless motor supplied with a 1045 propeller and accessories. It runs on 3S-4S LiPo with an 18A ESC and delivers up to 840g of thrust per motor for endurance-focused multirotor builds.
Key Highlights
- 935KV brushless outrunner tuned for endurance and long-range multirotors
- 12N14P framework with high-purity copper windings and neodymium magnets
- Runs 8 to 10 inch propellers on 3S or 4S LiPo packs
- Up to 840 g maximum thrust per motor with an 18 A ESC
- Red cap marks the CCW rotation version with clockwise thread tightening
- Compact 53 g motor measuring 39.5 mm long and 28 mm wide
Ideal For
- Builders assembling long-range or endurance multirotors
- DIY quadcopter makers using 8 to 10 inch propellers
- Camera drone projects running 3S or 4S LiPo packs
- Pilots replacing a single CCW motor on an existing frame
- Hobbyists who want a motor and propeller supplied together
Buying Tip
Check the rotation direction before ordering: this red cap version is CCW and tightens clockwise, so pair it with an opposite-rotation motor where your frame needs counter-rotation.
Elecvora expert review
Our verdict
The MT2213 is a sensible, well-behaved 935KV motor for endurance-style builds, and bundling a 1045 propeller removes one decision from the shopping list. It rewards careful matching of ESC and rotation direction rather than pushing limits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 935KV suits 8 to 10 inch props for endurance flying
- 12N14P layout with quality windings and magnets
- Up to 840 g thrust per motor
- Combo includes the 1045 propeller and accessories
- Compact 53 g motor that is easy to install
Cons
- Only the CCW version is included, so a counter-rotating motor is needed for a full set
- Requires a separate 18 A ESC
- No frame or battery included
Best for
Endurance and long-range multirotor builds on 3S or 4S power
Not ideal for
High-speed racing builds or setups needing a matched CW/CCW pair in one box
Specifications
| Motor KV (RPM/V) | 935 KV |
|---|---|
| Motor Type | Brushless Motor |
| Compatible LiPO Batteries | 3S to 4S |
| Model No. / Name | MT2213 |
| Maximum Thrust (gm) | 840 |
| Required ESC (A) | 18 |
| Framework | 12N14P |
| Compatible Prop (inch) | 8 ~ 10 |
| Length (mm) | 39.5 |
| Width (mm) | 28 |
| Weight (g) | 53 |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 30 × 5 × 3 cm |
What's in the box
- 1 x Emax MT2213 935KV brushless motor
- 1 x pair of 1045 propellers
- Mounting accessories as shown in the product image
Frequently Asked Questions
What battery should I use with this motor?
Which ESC does it need?
Which propellers fit?
What does the red cap mean?
What is included in the package?
How much thrust does it produce?
Overview
The Emax MT2213 is a brushless DC outrunner rated at 935KV, positioned in the endurance and long-range band of multirotor motors. Instead of chasing peak RPM, it is built to turn larger propellers efficiently, which is what most endurance builds need. The 12N14P stator and rotor layout, high-purity copper windings and neodymium magnets are all aimed at smooth, vibration-free running with less heat build-up during operation.
This listing is the red cap CCW version, supplied as a combo with a 1045 propeller and mounting accessories. A single order therefore covers the motor and the propeller it is intended to spin.
Key Features
- 935KV brushless outrunner for 8 to 10 inch propeller setups
- 12N14P framework for stable, low-vibration rotation
- High-purity copper windings and high-grade neodymium magnets
- Generates less heat during operation
- Straightforward to install with the included accessories
- Red cap identifies the CCW rotating motor
Specifications Explained
KV rating
At 935KV, the motor turns roughly 935 RPM per volt applied. On a 3S or 4S pack that gives a moderate, controllable RPM range suited to larger props rather than small, high-speed ones.
Thrust and ESC
Maximum thrust is listed at 840 g per motor, and an 18 A ESC is the required companion. Match your ESCs to that rating to keep the power system within its intended envelope.
Size and weight
The motor measures 39.5 mm in length and 28 mm in width, and weighs 53 g. That makes it easy to plan frame clearance and estimate the all-up weight of your build.
Rotation direction
BLDC rotation is opposite to the thread tightening direction. Because this motor rotates CCW, its thread tightens clockwise (right-handed thread). Keep this in mind when pairing it with a counter-rotating motor on the same frame.
Compatibility and Requirements
- LiPo packs: 3S to 4S
- ESC: 18 A
- Propellers: 8 to 10 inch (1045 propeller included)
No other compatibility details are specified for this motor.
Typical Uses
The MT2213 suits endurance and long-range multirotor builds, camera-carrying drones and general DIY quadcopter projects where 8 to 10 inch props and 3S or 4S power are the plan. It is a practical choice for builders who want predictable, vibration-free running rather than aggressive performance.
What's in the Box
- 1 x Emax MT2213 935KV brushless motor
- 1 x pair of 1045 propellers
- Mounting accessories as shown in the product image
Quick specs
- Motor KV (RPM/V)
- 935 KV
- Motor Type
- Brushless Motor
- Compatible LiPO Batteries
- 3S to 4S
- Model No. / Name
- MT2213
- Maximum Thrust (gm)
- 840
- Required ESC (A)
- 18
Frequently Bought Together

SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
$8.99
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
$13.99
F450 / Q450 Quadcopter Frame(PCB Version with Integrated PCB) + Plastic Landing Gear Combo Kit – Made in INDIA
$14.99
EMAX MT2213 935KV Brushless DC Motor ? Black Cap (CW Motor Rotation) With Prop1045 Combo (Original)
$20.99
Emax BLHeli Series 30A ESC with Oneshot (Original)
$25.99
Emax SimonK Series Multirotor 30A Brushless ESC (Original)
$24.99

















