Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Emax ECOII-2306-2400KV is a 54g brushless motor for 3-4S 5-inch FPV quads, rated to 740W with N52SH arc magnets. It pairs 2400KV with 5- to 5.5-inch props for responsive throttle and reliable everyday performance.

Key Highlights

  • 2400KV brushless wind tuned for 3-4S 5-inch FPV builds
  • N52SH curved arc magnets for sharper throttle response
  • 4mm bearing and 47mΩ internal resistance for smooth running
  • 740W maximum power handling at only 54g per motor
  • 19×19mm mounting pattern with 200mm 18 AWG silicone wire
  • Mirror-polished finish with multi-strand winding

Ideal For

  • FPV racing pilots building 5-inch quads
  • Freestyle pilots running 3-4S setups
  • Hobbyists refreshing an existing 5-inch build
  • Pilots who want affordable, serviceable motors
  • Builders stocking spare motors for race weekends

Buying Tip

Check that your frame uses a 19×19mm motor mount and that your ESCs and packs are rated for 3-4S before ordering a full set.

Elecvora expert review

Our verdict

A well-rounded, affordable 2400KV motor for 3-4S 5-inch FPV builds, with magnet and bearing choices that support responsive flight. It is a sensible pick for pilots who value dependable performance over premium pricing.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 2400KV suits common 3-4S 5-inch setups
  • N52SH arc magnets support sharp throttle response
  • 740W maximum power with a manageable 54g weight
  • Standard 19×19mm mounting and 200mm wires ease installation

Cons

  • Limited to 3-4S and 5- to 5.5-inch props
  • Motor only; ESCs, frame and props are not included
  • Bearing life depends on keeping it clean and maintained

Best for

5-inch FPV racing and freestyle pilots on 3-4S power

Not ideal for

Large-prop or high-voltage builds outside the 3-4S range

Specifications

Motor KV (RPM/V)2400 KV
Motor TypeBrushless Motor
Model No. / NameEmax ECOII-2807-1300KV
Bearing4mm
Idle Current1.8A
No. of Cells3-4 cell
Compatible Prop (inch)5-5.5
Max. Power (W)740W
Weight (g)54g
Internal Resistance(mOhm)47mΩ
Shipping Weight0.051 kg
Shipping Dimensions7 × 4 × 3 cm

What's in the box

  • 1 × Emax ECOII-2306-2400KV Brushless Motor

Frequently Asked Questions

What battery should I use with this motor?
The motor is specified for 3-4S LiPo packs. Stay within that range and keep propeller size at 5 to 5.5 inches.
How much power can it handle?
The listed maximum power is 740W, with an internal resistance of 47mΩ and an idle current of 1.8A.
Will it fit my frame?
It uses a 19×19mm mounting hole pattern, so check your frame's motor mount spacing before buying.
What is included with the motor?
The package contains one Emax ECOII-2306-2400KV brushless motor. ESCs, props, frame and radio gear are not included.
What props are recommended?
The specifications list 5- to 5.5-inch propellers as compatible. Match prop pitch and cell count to your build and flying style.
How should I care for the motor?
Keep the 4mm bearing clean and free of dirt, check screws after crashes, and inspect wires and windings for damage before each session.

Overview

The Emax ECOII-2306-2400KV is a brushless outrunner aimed at 5-inch FPV racing and freestyle quadcopters. With a 2400KV wind, it is intended for 3-4S battery setups and 5- to 5.5-inch propellers, making it a versatile option for pilots who want a responsive motor without moving to a heavier power system. Each motor weighs 54g and uses N52SH curved arc magnets along with a 4mm bearing, a combination that supports quick throttle changes and consistent rotation.

Key Features

  • 2400KV wind: matched to 3-4S packs and 5- to 5.5-inch props for balanced thrust and control.
  • N52SH arc magnets: curved magnets help tighten the airgap for stronger, more immediate throttle response.
  • 4mm bearing: supports smooth shaft rotation and reduced friction during flight.
  • 740W maximum power: headroom for aggressive racing lines and freestyle manoeuvres.
  • 19×19mm hole pattern: fits common 5-inch frame motor mounts.
  • 200mm 18 AWG silicone wire: gives enough length for tidy ESC routing.
  • Mirror-polished finish: a clean, modern look that is easy to keep looking sharp.

Specifications Explained

KV rating: 2400KV describes how fast the motor turns per volt applied. In practice, it tells you this motor is built for 3-4S batteries and 5- to 5.5-inch propellers, not for high-voltage or large-prop setups.

Power and resistance: A 740W maximum power figure and 47mΩ internal resistance indicate the motor can handle demanding throttle inputs while keeping electrical losses low. The 1.8A idle current is the baseline draw with no load, useful when checking a new build on the bench.

Weight and bearing: At 54g, the motor adds modest mass to each arm. The 4mm bearing is a key wear component, so keeping it clean and free of grit helps maintain smooth operation over time.

Compatibility and Requirements

This motor is specified for 3-4S LiPo power and 5- to 5.5-inch propellers. It uses a 19×19mm mounting hole pattern and ships with 200mm 18 AWG silicone wire for connecting to your ESC. You will need a suitable ESC, flight controller, frame and radio system to complete a build; these are not included. Match propeller size and cell count to the figures above rather than exceeding them.

Typical Uses

The ECOII-2306-2400KV suits 5-inch racing quads where quick throttle response matters, and freestyle builds that need consistent power across the throttle range. It is also a reasonable choice for pilots refreshing an existing 3-4S 5-inch setup or building a spare set of arms.

What's in the Box

  • 1 × Emax ECOII-2306-2400KV Brushless Motor

Quick specs

Motor KV (RPM/V)
2400 KV
Motor Type
Brushless Motor
Model No. / Name
Emax ECOII-2807-1300KV
Bearing
4mm
Idle Current
1.8A
No. of Cells
3-4 cell
See all specifications