Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A lightweight Emax neck strap that suspends your RC transmitter from your neck so your hands can relax between flights. It is rated to hold 1814.37 g, enough for a typical radio, while weighing only 0.049 kg itself.

Key Highlights

  • Emax transmitter neck strap design for RC radio controllers
  • Stated load capacity of 1814.37 g for everyday transmitter weight
  • Very light at 0.049 kg shipping weight, easy to pack
  • Compact shipping dimensions of 20 x 10 x 1 cm
  • Takes strain off hands and arms during long sessions
  • Simple lanyard design that clips on and comes off quickly

Ideal For

  • FPV pilots flying long sessions with a handheld radio
  • RC hobbyists who spend time tuning models on the bench
  • Line-of-sight flyers who want to rest their arms between flights
  • Pilots looking for a lightweight spare transmitter strap
  • Emax users matching accessories to their existing gear

Buying Tip

Check that your transmitter has a neck strap hook or lug before ordering, since the strap attaches to that point rather than to the radio body.

Elecvora expert review

Our verdict

A straightforward, light neck strap that does one job well: it takes the weight of your radio off your hands. The stated 1814.37 g capacity and 0.049 kg weight make it a sensible low-cost addition to any field bag.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Light enough to leave attached to the radio
  • Load capacity well above typical transmitter weight
  • Compact flat packed size
  • Simple to fit and remove
  • Emax branding matches other Emax gear

Cons

  • No attachment hardware beyond the strap itself is stated
  • Only suits transmitters that have a neck strap hook or lug
  • Limited adjustment detail is provided in the product data

Best for

Pilots who fly long sessions and want to rest their arms

Not ideal for

Transmitters without a neck strap attachment point

Specifications

Item TypeOther Accessories
Load Capacity (gm)1814.37
Shipping Weight0.049 kg
Shipping Dimensions20 × 10 × 1 cm

What's in the box

  • 1 x Emax Transmitter Neck Strap

Frequently Asked Questions

What is the Emax Transmitter Neck Strap for?
It is a lanyard that hangs your RC transmitter from your neck so your hands and arms do not have to support it during long sessions.
How much weight can it hold?
The stated load capacity is 1814.37 g, which is more than the weight of most handheld transmitters.
Does it need a battery or power source?
No. It is a passive strap with no electronics, so there is nothing to charge or power.
What is included in the package?
The package contains one Emax Transmitter Neck Strap.
How heavy is the strap itself?
The shipping weight is 0.049 kg, so it adds very little weight to your gear.
How should I store it?
Fold or coil it flat and keep it in your transmitter case or field bag to prevent tangling.

Overview

The Emax Transmitter Neck Strap is a simple, purposeful accessory for anyone who flies or works with an RC transmitter for more than a few minutes at a time. Instead of holding the radio up with your hands the whole session, you hang it from your neck and let your shoulders carry the load. The strap is built around the Emax Remote Transmitter Strap design and is stated to support 1814.37 g, which covers the weight of a typical transmitter.

Because the strap itself weighs only 0.049 kg and packs down to 20 x 10 x 1 cm, it slips into a pocket, tool bag or transmitter case without adding bulk. It is the kind of small accessory you notice most when you forget it.

Key Features

  • Emax design: branded transmitter strap that matches other Emax equipment.
  • 1814.37 g load capacity: rated to hold a standard radio comfortably.
  • Lightweight build: 0.049 kg shipping weight keeps your field bag light.
  • Compact storage: folds into a 20 x 10 x 1 cm footprint.
  • Quick to fit: a lanyard that goes on and comes off in seconds.

Specifications Explained

Load capacity

The stated capacity of 1814.37 g tells you how much weight the strap is intended to support. That figure is well above the weight of most handheld transmitters, so you are not pushing the strap near its limit in normal use. It is a useful reference point if you fly with a heavier radio or added accessories.

Weight and packed size

At 0.049 kg, the strap is light enough to leave attached to your radio or carry as a spare. The 20 x 10 x 1 cm shipping dimensions describe a flat, compact item, so storing it between sessions is straightforward.

Item type

It is listed as an other accessory in the transmitter receivers accessories category, which simply means it is a support item rather than an electronic component.

Compatibility and Requirements

The strap is designed for use with RC transmitters and is matched to the Emax range. No specific connector, attachment point or mounting standard is stated in the product data, so check that your transmitter has a suitable neck strap hook or lug before ordering. No batteries, power source or additional hardware are required.

Typical Uses

  • Holding a transmitter while you adjust settings on the bench.
  • Reducing arm fatigue during long line-of-sight flying sessions.
  • Keeping a radio secure between flights at the field.
  • A spare strap for a second transmitter or a friend's radio.

What's in the Box

One Emax Transmitter Neck Strap.

Quick specs

Item Type
Other Accessories
Load Capacity (gm)
1814.37
Shipping Weight
0.049 kg
Shipping Dimensions
20 × 10 × 1 cm
See all specifications