Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny infrared flame sensor module that detects ignition sources and outputs a digital signal for microcontrollers. The adjustable potentiometer lets you fine-tune sensitivity for your specific environment.

Key Highlights

  • Detects flames and light sources in the 760-1100nm range
  • Adjustable sensitivity via onboard blue potentiometer
  • Digital output at D0 connects directly to microcontroller I/O
  • Green and red indicator LEDs show power and signal status
  • 60-degree detection angle for broad coverage
  • Compact 32 x 14mm board with 3mm mounting holes

Ideal For

  • Electronics hobbyists building Arduino-based projects
  • Students learning about sensors and microcontrollers
  • Makers creating fire detection prototypes
  • DIY enthusiasts adding flame-triggered actions
  • Robotics builders needing a compact flame sensor

Buying Tip

Remember that the module requires a separate microcontroller and power source; test the sensitivity adjustment in your target environment before final installation.

Elecvora expert review

Our verdict

A straightforward, low-cost flame sensor module that does exactly what it promises: detects flames and provides a digital output. It is ideal for simple projects where precise calibration is not critical.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple digital output easy to interface
  • Adjustable sensitivity via potentiometer
  • Compact and lightweight design
  • Visual status indicators
  • Low power consumption from 3.3-5V

Cons

  • May respond to non-flame IR sources
  • No analog output for detailed measurements
  • Requires separate microcontroller and wiring

Best for

Beginners and hobbyists building basic flame detection projects

Not ideal for

Professional fire safety systems requiring certified reliability

Specifications

Rated Voltage (VDC)3.3 to 5
Mounting Hole Diameter (mm)3
Length (mm)32
Width (mm)14
Weight (g)3

Frequently Asked Questions

What is the detection range of this flame sensor?
The detection range depends on the flame size and sensitivity setting. The manufacturer does not specify a maximum distance, but typical use involves placing the sensor within a short distance of the flame.
Can I connect this module directly to an Arduino?
Yes, the module is designed to work with Arduino and similar microcontrollers. Connect VCC to 3.3V or 5V, GND to ground, and D0 to a digital input pin.
How do I adjust the sensitivity?
Use a small screwdriver to turn the blue potentiometer on the board. Rotate it until the module triggers at the desired flame distance or intensity.
What is included in the package?
The package contents are not specified by the manufacturer. Typically, only the module itself is included; please check the listing for details.
Does this sensor detect other light sources?
The sensor is most sensitive to infrared light in the 760-1100nm range, which includes flames. It may also respond to other strong IR sources such as incandescent bulbs or sunlight, so avoid placing it near such sources.
What is the operating voltage?
The module operates from 3.3 to 5 VDC, making it compatible with common logic levels.

Overview

The Flame Sensor Infrared Receiver Module is a small, lightweight board that detects flames and ignition sources by responding to infrared light in the 760nm to 1100nm spectrum. It is intended for electronics projects where a simple digital signal is needed to indicate the presence of a flame or strong IR source. The module operates from a 3.3 to 5 VDC supply, making it compatible with common microcontroller platforms such as Arduino. A built-in potentiometer allows you to adjust the detection threshold, and two LEDs provide visual feedback: a red power indicator and a green signal indicator. The board measures 32mm by 14mm and weighs only 3 grams, so it can be mounted in tight spaces using the 3mm mounting holes.

Key Features

  • Flame and IR detection: Senses light wavelengths from 760nm to 1100nm, covering the typical emission range of flames.
  • Adjustable sensitivity: The blue potentiometer on the board lets you set the detection threshold for different environments.
  • Digital output: The D0 terminal provides a high signal when a flame is detected, ready for direct connection to a microcontroller I/O pin.
  • Visual indicators: A red LED indicates power, and a green LED lights up when the output signal is active.
  • Wide detection angle: The 60-degree detection angle gives a reasonable field of view for many small-scale projects.
  • Compact and lightweight: At 32mm x 14mm and 3g, the module is easy to integrate into existing enclosures or breadboards.

Specifications Explained

Rated voltage (3.3 to 5 VDC): This means the module can be powered from the same 3.3V or 5V rail used by most Arduino boards and similar microcontrollers, simplifying wiring.

Detection range (760nm to 1100nm): The sensor is most responsive to infrared light in this band, which includes the characteristic emission of flames. It is not a general-purpose light sensor and may also respond to other strong IR sources.

Detection angle (60 degrees): The module sees a cone-shaped area in front of it. For best results, point it directly toward the area you want to monitor.

Dimensions and mounting: The 32mm length and 14mm width keep the footprint small, while the 3mm mounting hole diameter accepts common M3 screws or standoffs for secure installation.

Compatibility and Requirements

The module is designed for use with microcontrollers that accept a digital input and can supply 3.3 to 5 VDC. It is commonly used with Arduino boards, but any platform with a compatible digital I/O and power supply can work. No additional libraries are required for basic operation; you simply read the digital state of the connected pin. A small screwdriver is useful for adjusting the potentiometer. Note that the module does not include jumper wires or a power source; these must be provided separately.

Typical Uses

  • Fire alarm and flame detection prototypes
  • Ignition source monitoring in small projects
  • Flame-activated switches or relays
  • Educational demonstrations of infrared sensing
  • DIY safety gadgets and robotics

What's in the Box

Package contents are not specified by the manufacturer. Please check the product listing for details on included accessories.

Quick specs

Rated Voltage (VDC)
3.3 to 5
Mounting Hole Diameter (mm)
3
Length (mm)
32
Width (mm)
14
Weight (g)
3
See all specifications