
1 / 4 · Click to enlarge
AI Summary
The Foxeer M10Q 250 GPS 5883 Compass combines a 72-channel M10 GNSS receiver with a QMC5883 compass for precise positioning and heading. Its dual NMEA/UBLOX protocol and 5V input make it easy to integrate into drone and RC builds.
Key Highlights
- M10 10th-generation chip with 72 channels for multi-constellation tracking
- Supports GPS, GLONASS, BDS, GALILEO, ESBAS, and QZSS L1 signals
- Integrated QMC5883 compass for accurate heading information
- Dual NMEA/UBLOX protocol with 1Hz-10Hz adjustable output
- 5V input and 115200bps baud rate for straightforward wiring
- Ceramic antenna and 1.5m outdoor horizontal accuracy
Ideal For
- FPV pilots adding GPS and compass to freestyle or long-range quads
- RC aircraft builders needing reliable position and heading data
- Autonomous vehicle and robotics developers using NMEA or UBLOX
- Drone hobbyists upgrading to a multi-constellation GNSS module
Buying Tip
Confirm your flight controller accepts 5V input and supports either NMEA or UBLOX protocol at 115200bps before mounting this module.
Elecvora expert review
Our verdict
The Foxeer M10Q 250 GPS 5883 Compass offers a practical mix of multi-constellation GNSS and compass heading in a compact module. Its dual protocol and adjustable output make it a flexible choice for many drone and RC builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 72-channel M10 receiver with six constellation support
- Integrated QMC5883 compass for heading data
- Dual NMEA/UBLOX protocol and 1Hz-10Hz output
- High sensitivity for challenging conditions
Cons
- Requires a 5V supply and serial port from the host system
- No mounting hardware or cables listed in the package
- Compass performance can be affected by nearby magnetic interference
Best for
Drone and RC builders needing GPS position and compass heading in one compact module
Not ideal for
Systems without a 5V serial GPS input or users needing pre-soldered connectors
Specifications
| Chip | M10(10th Generation Chip) |
|---|---|
| Frequency | GPS L1, GLONASS L1, BDS B1, GALILEO, ESBAS L1, QZSS L1 |
| Input Voltage (V) | 5V |
| Antenna (Y/N) | Ceramic Antenna |
| Channel | 72 |
| Batteries Required | Bilid-in |
| Compass | QMC5883 |
| Baud Rate (bps) | 115200bps |
| Protocol | Dual NMEA/UBLOX |
| Output Frequency | 1Hz-10Hz,10Hz default |
| Speed accuracy | 0.05m/s |
| Horizontal Position Accuracy | 2D ACC1.5m(outdoor) |
| Receiver Sensitivity | Trace -166dBm; Capture -160dBm |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 13 × 9 × 2 cm |
What's in the box
- 1 x Foxeer M10Q 250 GPS 5883 Compass
Frequently Asked Questions
What is the power requirement for this GPS module?
Which communication protocols does it support?
Does it include a compass?
What is included in the package?
How accurate is the positioning?
Can I change the update rate?
Overview
The Foxeer M10Q 250 GPS 5883 Compass is a compact GNSS module that pairs a high-sensitivity M10 receiver with a QMC5883 magnetometer. It is built for drones, RC craft, and autonomous platforms that need dependable position and heading data in a small package. The module receives GPS L1, GLONASS L1, BDS B1, GALILEO, ESBAS L1, and QZSS L1 signals over 72 channels, giving it access to multiple satellite constellations for consistent fixes.
Key Features
- M10 chip: 10th-generation receiver technology for reliable positioning.
- Multi-constellation support: Tracks six satellite signal types for broader coverage.
- QMC5883 compass: Provides heading data alongside position for orientation-aware navigation.
- Dual protocol: Works with NMEA or UBLOX output, selectable for your system.
- Adjustable output: 1Hz to 10Hz refresh rate, with 10Hz as the default.
- Ceramic antenna: Integrated antenna keeps the module compact and ready to mount.
Specifications Explained
The M10 chipset and 72 channels mean the module can listen to many satellites at once, which helps maintain a stable fix. Receiver sensitivity of -166dBm tracking and -160dBm capture allows it to pick up weaker signals. Horizontal position accuracy is rated at 1.5m (2D) outdoors, and speed accuracy is 0.05m/s. The QMC5883 compass adds magnetic heading, useful for direction hold and navigation tasks. Output frequency is selectable from 1Hz to 10Hz, defaulting to 10Hz for responsive updates. Communication runs at 115200bps over dual NMEA/UBLOX protocol, and the module accepts 5V input. Dynamic limits include 50,000m altitude, 500m/s speed, and 4G acceleration.
Compatibility and Requirements
The module requires a 5V power source and a serial connection at 115200bps. It supports both NMEA and UBLOX protocols, so it can be used with systems that accept either format. No specific flight controller models are listed; check that your controller supports 5V input and the chosen protocol. A clear view of the sky is needed for best GPS performance.
Typical Uses
This module suits FPV drones, RC aircraft, ground vehicles, and autonomous projects that need GPS position and compass heading. Its small size and light weight make it easy to fit on space-constrained builds. Use it for return-to-home, waypoint navigation, and heading reference where the flight controller supports GPS input.
What's in the Box
Package includes 1 x Foxeer M10Q 250 GPS 5883 Compass module.
Quick specs
- Chip
- M10(10th Generation Chip)
- Frequency
- GPS L1, GLONASS L1, BDS B1, GALILEO, ESBAS L1, QZSS L1
- Input Voltage (V)
- 5V
- Antenna (Y/N)
- Ceramic Antenna
- Channel
- 72
- Batteries Required
- Bilid-in



















