
1 / 4 · Click to enlarge
AI Summary
A matched pair of Foxeer DalProp Cyclone T5045C Pro five-inch tri-blade propellers in Crystal Red, one CW and one CCW. Polycarbonate construction, 4.5-inch pitch and a 5mm hub make them a straightforward fit for 5-inch FPV builds.
Key Highlights
- Five-inch tri-blade design with a 4.5-inch pitch for responsive control
- Matched CW and CCW pair covers both rotation directions on a quad
- Polycarbonate construction built to handle the knocks of regular flying
- Lightweight at around 5.4 g per propeller
- 5mm hub bore fits common motor shaft sizes
- Crystal Red finish improves visibility in the air and on the ground
Ideal For
- FPV pilots flying five-inch multirotor builds
- Racers who want a lightweight tri-blade prop
- Freestyle flyers looking for a matched CW and CCW pair
- Pilots who prefer a bright, visible propeller colour
- Hobbyists maintaining a stock of spare five-inch props
Buying Tip
Check that your motors use a 5mm propeller shaft before ordering, since the hub bore is the one dimension that decides whether these props will fit.
Elecvora expert review
Our verdict
A sensible, lightweight five-inch tri-blade pair with a useful CW and CCW combination and a bright Crystal Red finish. The Pro edition is aimed at pilots who want the Cyclone feel with better crash tolerance.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Matched CW and CCW pair in one pack
- Light at around 5.4 g per propeller
- Polycarbonate construction for impact resistance
- 5mm hub suits many common motor shafts
- Bright colour aids visibility in flight
Cons
- Only one pair per pack, so spares need planning
- No mounting hardware or tools included
- Pitch and blade count suit five-inch builds only
Best for
Five-inch FPV pilots who want a light tri-blade prop pair with good visibility
Not ideal for
Builds using motor shafts other than 5mm or propellers outside the five-inch class
Specifications
| Prop. Diameter (inch) | 5 |
|---|---|
| Material | Polycarbonate |
| Rotation Direction | CCW, CW |
| Pitch(inch) | 4.5 |
| Hub Diameter (mm) | 5mm |
| Weight (g) | 5.4g |
| Color | Crystal Red |
| Shipping Weight | 0.115 kg |
| Shipping Dimensions | 25 × 18 × 5 cm |
What's in the box
- 1 x Foxeer DalProp Cyclone Triblade T5045C Pro Propeller Pair, CW and CCW, Crystal Red
Frequently Asked Questions
How many propellers are included?
What size motors do these fit?
Can I use them on any drone?
Do the props come with mounting screws or tools?
How should I care for them?
Why does the pack include two rotation directions?
Overview
The Foxeer DalProp Cyclone T5045C Pro is a five-inch tri-blade propeller offered as a single pair containing one clockwise and one counter-clockwise prop. It belongs to the long-running Cyclone family, and this Pro edition is positioned around improved durability over the original design. The Crystal Red colourway gives the blades a translucent red look that stands out against sky and ground.
Each propeller measures five inches in diameter with a 4.5-inch pitch, weighs roughly 5.4 grams and uses a 5mm hub bore. That combination makes the pair a practical choice for pilots flying five-inch multirotors who want a lightweight, three-blade prop with a balanced feel.
Key Features
- Tri-blade layout: three blades per prop for grip and stability through turns.
- Matched pair: one CW and one CCW propeller in every pack.
- Polycarbonate build: a tough, impact-resistant material for everyday flying.
- Light weight: about 5.4 g per propeller keeps rotating mass low.
- 5mm hub: a standard bore size that suits many motor shafts.
- Crystal Red finish: a bright, semi-transparent colour for easy visual tracking.
Specifications Explained
Diameter and pitch
The five-inch diameter defines the class of build these props suit, while the 4.5-inch pitch describes how far the prop would advance in one revolution in theory. A 4.5 pitch is a middle-ground figure that balances acceleration with top-end speed, which is why it appears on so many five-inch setups.
Blade count
Three blades sit between two-blade props, which tend to be lighter and faster, and four-blade props, which tend to offer more grip. The tri-blade format is a common compromise for pilots who want control without excessive drag.
Hub and weight
The 5mm hub bore is the mounting dimension to check against your motor shaft before ordering. At around 5.4 g each, the props add little rotating mass, which helps keep the drivetrain responsive.
Compatibility and Requirements
These propellers are intended for five-inch multirotor builds with motors that accept a 5mm propeller hub. The pack includes both rotation directions, so it covers the two clockwise and two counter-clockwise positions on a typical quadcopter. Always confirm your motor shaft diameter and mounting style before fitting. No motors, tools or mounting hardware are included.
Typical Uses
The T5045C Pro pair suits five-inch FPV quads used for racing, freestyle flying and general multirotor practice. The Crystal Red colour is handy for pilots who want to see blade orientation and position clearly during flight and when retrieving a model after landing.
What's in the Box
- 1 x Foxeer DalProp Cyclone Triblade T5045C Pro propeller pair, CW and CCW, Crystal Red




Quick specs
- Prop. Diameter (inch)
- 5
- Material
- Polycarbonate
- Rotation Direction
- CCW, CW
- Pitch(inch)
- 4.5
- Hub Diameter (mm)
- 5mm
- Weight (g)
- 5.4g



















