Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Foxeer Pagoda Pro SMA FPV antenna delivers 5.8GHz RHCP omnidirectional coverage with 3dBi gain and low SWR for stable drone video. Its 11.5g lightweight build and 360-degree pattern suit racing and freestyle quads.

Key Highlights

  • 5.8GHz RHCP omni antenna for FPV video
  • 3dBi gain with SWR below 1.22
  • Axial ratio close to 1 for clean circular signal
  • 98% radiation efficiency and 5.5-6GHz bandwidth
  • Lightweight 11.5g PC+ABS body
  • SMA connector for compatible VTX and receivers

Ideal For

  • FPV racing pilots needing reliable 5.8GHz video
  • Freestyle drone builders looking for a lightweight omni antenna
  • Pilots upgrading to RHCP for better signal clarity
  • Ground station setups requiring 360-degree coverage

Buying Tip

Check that your video transmitter or receiver has an SMA connector, as this antenna will not fit RP-SMA ports without an adapter.

Elecvora expert review

Our verdict

The Foxeer Pagoda Pro is a solid choice for pilots wanting a lightweight, efficient RHCP omni antenna with low SWR and wide bandwidth. It delivers dependable 5.8GHz performance for racing and freestyle without adding noticeable weight.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Low SWR under 1.22 protects VTX
  • Lightweight 11.5g design
  • Wide 5.5-6GHz bandwidth
  • Efficient 0.98 radiation efficiency

Cons

  • SMA connector only; no RP-SMA option
  • Not intended for long-range directional use

Best for

FPV racing and freestyle pilots using 5.8GHz RHCP systems

Not ideal for

Pilots needing a directional antenna for extreme long-range flights

Specifications

Item TypeAntenna
Connector TypeSMA
Frequency (GHz)5.8
Gain3dBi
Axial RatioClose to 1
Bandwidth5.5G~6GHz
Radiation Efficiency0.98
SWR<1.22 at Center Frequency
Overall Dimension17*23mm
Length (mm)86mm
PolarizationRHCP
Body Case MaterialPC+ABS
Weight (g)11.5g
Shipping Weight0.018 kg
Shipping Dimensions9 × 3 × 3 cm

What's in the box

  • 1 x Pagoda Pro SMA FPV Antenna

Frequently Asked Questions

What connector does this antenna use?
It uses an SMA connector. Make sure your device has an SMA port, not RP-SMA.
Is this antenna RHCP or LHCP?
It is right-hand circular polarized (RHCP). Match it with RHCP antennas on your receiver for best results.
What frequency range does it cover?
It covers 5.5GHz to 6GHz, centered on 5.8GHz.
How much does the antenna weigh?
It weighs approximately 11.5 grams.
What is included in the package?
The package includes one Pagoda Pro SMA FPV Antenna.
Can I use this on a video receiver?
Yes, it can be used on any 5.8GHz FPV receiver with an SMA connector.

Overview

The Foxeer Pagoda Pro is a 5.8GHz right-hand circular polarized (RHCP) omnidirectional antenna designed for FPV pilots who want consistent video reception. It uses an SMA connector and is built to handle the demands of drone racing and freestyle flying. With a compact PC+ABS housing measuring 17 by 23mm and a total length of 86mm, it adds little bulk to your build.

Key Features

  • RHCP omnidirectional pattern: Provides 360-degree coverage so you can fly in any direction relative to the antenna.
  • Low SWR: Standing wave ratio is under 1.22 at center frequency, helping protect your video transmitter.
  • Efficient signal transfer: Radiation efficiency of 0.98 and axial ratio close to 1 support clean circular polarization.
  • Wide bandwidth: Covers 5.5GHz to 6GHz, accommodating common 5.8GHz FPV channels.
  • Lightweight: At just 11.5g, it minimizes drag and weight on small quads.

Specifications Explained

Frequency and bandwidth: The 5.8GHz band with 5.5-6GHz coverage means the antenna works across typical FPV video channels. Gain: 3dBi provides a balanced omni pattern, giving reasonable range without a narrow beam. Polarization: RHCP matches right-hand circular polarized antennas on your receiver or transmitter for best performance. SWR: A low SWR indicates efficient power transfer from your VTX to the antenna, reducing reflected power. Axial ratio: Close to 1 means the antenna produces a clean circular signal, which helps reject multipath interference. Radiation efficiency: 0.98 means very little signal is lost as heat. Connector: SMA is a common threaded connector; ensure your device has a matching SMA port.

Compatibility and Requirements

This antenna uses an SMA connector. It is intended for 5.8GHz FPV video transmitters and receivers that accept SMA. No additional accessories are required for installation beyond a compatible SMA port. The antenna is not intended for use outside the 5.5-6GHz range.

Typical Uses

Use the Pagoda Pro on FPV racing quads, freestyle drones, or as a receiver antenna on your goggles or ground station. Its omnidirectional pattern suits flying at various angles and distances around the field. The lightweight design is especially beneficial for small builds where every gram counts.

What's in the Box

1 x Pagoda Pro SMA FPV Antenna.

Pagoda Pro SMA FPV AntennaPagoda Pro SMA FPV Antenna

Quick specs

Item Type
Antenna
Connector Type
SMA
Frequency (GHz)
5.8
Gain
3dBi
Axial Ratio
Close to 1
Bandwidth
5.5G~6GHz
See all specifications