Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FrSky, this fpv and telemetry transmitter-receivers is a good fit for RC and FPV hobbyists. Main specs: item type Receiver; frequency (ghz) 2.4; dimensions (l x w x h) mm 46.5 x 26.3 x 14.7mm (L x W x H). Check that your power source supplies 3.5-10v DC before connecting it.

Key Highlights

  • Item Type: Receiver
  • Frequency (GHz): 2.4
  • Dimensions (L x W x H) mm: 46.5 x 26.3 x 14.7mm (L x W x H)

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeReceiver
Frequency (GHz)2.4
Dimensions (L x W x H) mm46.5 x 26.3 x 14.7mm (L x W x H)
Operating Current (A)0.18
Operating Voltage (VDC)3.5-10v DC
Weight (g)16.6g
Shipping Weight0.051 kg
Shipping Dimensions11 × 8 × 3 cm

Overview

The FrSky TD R10 2.4GHz 900M Dual Band Receiver w/ Antennas, made by FrSky, is listed in our fpv and telemetry transmitter-receivers range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Receiver
  • Frequency (GHz): 2.4 (make sure the rest of your system works at this frequency)
  • Dimensions (L x W x H) mm: 46.5 x 26.3 x 14.7mm (L x W x H) (measure your mounting space before ordering)
  • Operating Current (A): 0.18 (your supply must deliver at least this much current)
  • Operating Voltage (VDC): 3.5-10v DC (match this to your power supply; too high a voltage can damage the part)
  • Weight (g): 16.6g (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.051 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 11 × 8 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Dual Band Receiver w/Antennas FrSky TD R10 2.4GHz 900M  is unlike any other FrSky 2.4Ghz or 900Mhz receiver - the TD R10 works simultaneously at both 900Mhz and 2.4Ghz frequencies. That means Tandem receivers provide not only low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance. The Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data (Power & Signal related) under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module. The configurable 10-channel ports are a big feature of TD R10, each channel port can be assigned as PWM, SBUS, FBUS, or SPort. With the FBUS protocol, the Tandem series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the builds setup.

Features:

  1. 10 Configurable Channel Ports- CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In and CP2-10: PWM / SBUS Out / FBUS / S.Port
  2. Supply current range (every single port) Instantaneous current:5A/ Continuous current:3A
  3. Triple antenna design for multi-directional coverage
  4. Simultaneous working dual-band TD mode
  5. Long control range (up to 50KM – 100KM)
  6. 4ms Race Mode with Telemetry
  7. Over-The-Air (OTA) FW update
  8. Built-in voltage sensor
  9. Black Box function

Packages Includes:

1 x FrSky TD R10 2.4GHz 900M Dual Band Receiver w/ Antennas

Quick specs

Item Type
Receiver
Frequency (GHz)
2.4
Dimensions (L x W x H) mm
46.5 x 26.3 x 14.7mm (L x W x H)
Operating Current (A)
0.18
Operating Voltage (VDC)
3.5-10v DC
Weight (g)
16.6g
See all specifications