Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FrSky, this fpv and telemetry transmitter-receivers is a good fit for makers, students and electronics hobbyists. Main specs: operating current (ma) 84mA 100mW; weight (g) 51g; dimensions (l x w x h) mm 62.8×30×17.2mm.

Key Highlights

  • Operating Current (mA): 84mA 100mW
  • Weight (g): 51g
  • Dimensions (L x W x H) mm: 62.8×30×17.2mm

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Current (mA)84mA 100mW
Supported4 RF protocols, ACCST D16 / ACCESS / ELRS / TW modes
Weight (g)51g
Dimensions (L x W x H) mm62.8×30×17.2mm
Shipping Weight0.092 kg
Shipping Dimensions10 × 13 × 4 cm

Overview

The FrSky TWIN Lite Pro Module , made by FrSky, is listed in our fpv and telemetry transmitter-receivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Current (mA): 84mA 100mW (your supply must deliver at least this much current)
  • Supported: 4 RF protocols, ACCST D16 / ACCESS / ELRS / TW modes (confirm your cable or board uses the same connector)
  • Weight (g): 51g (important for drones, RC models and anything you carry)
  • Dimensions (L x W x H) mm: 62.8×30×17.2mm (measure your mounting space before ordering)
  • Shipping Weight: 0.092 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 13 × 4 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Lite Pro Module is a powerful RF module that enables ETHOS-capable radios to bind to the TW series receivers and support the TW protocol’s dual 2.4G frequencies simultaneously on the same receiver. The TW active-active protocol is different from the general active-standby redundancy solutions (where one receiver takes over signal control only when the other is in Failsafe mode), with the TW protocol, dual 2.4G frequency bands are active on the TW series module, and receiver at the same time. The RF module has two 2.4G external antennas RF mounted to provide multi-directional and wider coverage for transmitting signals compared to a single antenna design. Taking advantage of these features, the Twin system can provide less latency and higher reliability at a faster data rate with confidence. In addition to the TW mode, this module also supports ACCST D16, ACCESS, and ELRS 2.4G modes, this means users can benefit from a wide range of compatible receiver options to choose and bind to when building the RC model. The Twin Lite Pro module offers resilient RF power options up to 500mW, constructed with the CNC machined metal module shell that helps aid heat dissipation, this system can ensure a stable long-range control further around tens of kilometers under long working hours.  
Features:
  1. Less latency with more range and higher reliability at a faster data rate
  2. CNC machined metal module shell designed to aid heat dissipation
  3. Adjustable RF Power (Up to 500mW)
  4. Supports 4 RF protocols: ACCST D16 / ACCESS / ELRS (Compatible) / TW Mode
  5. TW Mode (ETHOS Radios compatible)
  6. Highly resilient RF module providing dual 2.4G signals working simultaneously
  7. Long-range control (Tens of kilometers, range varies based on the RF Power settings.)
  8. Low-latency (<4ms) supporting full telemetry

Packages Includes:

1 x FrSky TWIN Lite Pro Module

Quick specs

Operating Current (mA)
84mA 100mW
Supported
4 RF protocols, ACCST D16 / ACCESS / ELRS / TW modes
Weight (g)
51g
Dimensions (L x W x H) mm
62.8×30×17.2mm
Shipping Weight
0.092 kg
Shipping Dimensions
10 × 13 × 4 cm
See all specifications