
1 / 2 · Click to enlarge
At a glance
Made by Geekworm, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type Peripherel Board; model no. / name X1000; dimensions (l x w x h) mm 6.5 x 5.7 x 2.2 cm.
Key Highlights
- Item Type: Peripherel Board
- Model No. / Name: X1000
- Dimensions (L x W x H) mm: 6.5 x 5.7 x 2.2 cm
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Peripherel Board |
|---|---|
| Model No. / Name | X1000 |
| Dimensions (L x W x H) mm | 6.5 x 5.7 x 2.2 cm |
| Weight (g) | 27 |
| Connector Type | USB |
| Compatibility | Raspberry Pi 5 |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 9 × 8 × 3 cm |
Overview
The Geekworm X1000 PCIe to M.2 Key-M NVMe SSD PIP TOP for Raspberry Pi 5, made by Geekworm, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Peripherel Board
- Model No. / Name: X1000
- Dimensions (L x W x H) mm: 6.5 x 5.7 x 2.2 cm (measure your mounting space before ordering)
- Weight (g): 27 (important for drones, RC models and anything you carry)
- Connector Type: USB (confirm your cable or board uses the same connector)
- Compatibility: Raspberry Pi 5
- Shipping Weight: 0.04 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 9 × 8 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- 【Compatibility】Raspberry Pi 5 PCIe M.2 HAT Peripheral Board only compatible with Raspberry Pi 5 SBC, Model: X1000 V1.5, Match metal case refer to P579(ASIN:B0CRD7XQCK / ASIN: B0CSWB3V4Y)
- 【User Manual & FAQ】Refer to Geekworm WiKi and search X1000 and FAQ. Refer to the FAQ to do troubleshoot step by step if can't boot/recognize from NVMe SSD.
- 【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation
- 【How to Power】Can Power the X1000 shield directly from the FFC PCIe ribbon. With 40pin pin header, it can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity SSDs. Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP7WPZZY ) or GaN PD 27W power adapter(ASIN:B0CZRQSWWP )
- 【Packing List】1 x X1000 PCIe Peripheral Board, 1x Screws Pack Accessories (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
Package Includes:
1 x X1000 PCIe Peripheral Board
1x Screws Pack Accessories
Quick specs
- Item Type
- Peripherel Board
- Model No. / Name
- X1000
- Dimensions (L x W x H) mm
- 6.5 x 5.7 x 2.2 cm
- Weight (g)
- 27
- Connector Type
- USB
- Compatibility
- Raspberry Pi 5



















