Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Geekworm, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type Peripherel Board, SSD; model no. / name NVMe; compatibility Pi 5.

Key Highlights

  • Item Type: Peripherel Board, SSD
  • Model No. / Name: NVMe
  • Compatibility: Pi 5

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypePeripherel Board, SSD
Model No. / NameNVMe
CompatibilityPi 5
PCB Size ( L x W ) mm109mm x 87.2mm
Connector TypeM.2 KEY-M 67P x4
LED IndicatorBlue LEDs for power
Data Transfer RatePCIe 2.0, up to 5Gbps
Shipping Weight0.095 kg
Shipping Dimensions14 × 11 × 4 cm

Overview

The Geekworm X1011 PCIe to Four M.2 NVMe SSD Board for Raspberry Pi 5, made by Geekworm, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Peripherel Board, SSD
  • Model No. / Name: NVMe
  • Compatibility: Pi 5
  • PCB Size ( L x W ) mm: 109mm x 87.2mm (measure your mounting space before ordering)
  • Connector Type: M.2 KEY-M 67P x4 (confirm your cable or board uses the same connector)
  • LED Indicator: Blue LEDs for power
  • Data Transfer Rate: PCIe 2.0, up to 5Gbps
  • Shipping Weight: 0.095 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The X1011 four M.2 NVMe SSD shield, designed to provide a mass-capacity storage and high-speed storage solution for your Raspberry Pi 5. Its sleek and compact design enables easy attachment of four full-size M.2 2280 SSDs to your Raspberry Pi 5. With its PCIe 2.0 interface, you can experience data transfer rates of up to 5Gbps, allowing you to effortlessly transfer large amounts of data within seconds. The X1011 connects to the underside of the Raspberry Pi 5, eliminating the need for a passthrough for the GPIO. This means you can use your favorite HATs while also utilizing this expansion board. Moreover, the X1011 offers versatile power options – it can draw power from the Raspberry Pi5 through pogo pins using a USB-C power supply, or alternatively, power the Raspberry Pi5 from the X1011 using a DC power adapter via the onboard DC power jack, streamlining the power supply process to a single source. The X1011 is an ideal storage solution for creating a home media center or building a network-attached storage (NAS) system. It allows you to store and stream your own videos, music, and digital photos within your home or even remotely across the world. Note:   Raspberry Pi Board is Not Included.

Features:

  1. Compatible with Raspberry Pi 5B only
  2. Support FOUR M.2 NVMe SSDs
  3. Support M.2 NVMe SSD with 2280/2260/2242/2230 length
  4. PCB Size: 109mm x 87.2mm
  5. Provides speedy data transfer with PCIe 2.0 5Gbps
  6. Powering via both pogo pins & FFC or DC power jack, ensuring sufficient power supply without any worries
  7. LED indicators in blue display power and drive status
  8. Features an integrated high-performance PCIe packet switch
  9. Equipped with high-efficiency DC/DC step-down converter, delivering a maximum of 10A to power your SSDs
  10. Designed to be attached on bottom, allows using your favorite HATs alongside it
  11. Compatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down.
  12. Compatible with the official Raspberry Pi 5 active cooler or Argon THRML 30mm Active Cooler or third party cooler without affecting cooling performance

Package Includes:

1 x Geekworm X1011 PCIe to Four M.2 NVMe SSD Board for Raspberry Pi 5

Quick specs

Item Type
Peripherel Board, SSD
Model No. / Name
NVMe
Compatibility
Pi 5
PCB Size ( L x W ) mm
109mm x 87.2mm
Connector Type
M.2 KEY-M 67P x4
LED Indicator
Blue LEDs for power
See all specifications