Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Geekworm X1301 adds HDMI input and HDMI pass-through to Raspberry Pi 5/4B/3B+/3B, converting video up to 1080p@60fps to CSI-2. It also carries audio over I2S and stacks with other HATs.

Key Highlights

  • Adds HDMI input and HDMI pass-through to Raspberry Pi
  • Supports video up to 1080p at 60fps
  • Uses Toshiba TC358743XBG HDMI to CSI-2 bridge chip
  • 4-lane MIPI CSI-2, up to 1Gbps per lane
  • HDMI audio input and transmission over I2S
  • 22-pin FPC CSI-2 connector, stackable design

Ideal For

  • Raspberry Pi enthusiasts adding HDMI input
  • Makers building video capture or streaming projects
  • Home theater PC builders
  • Digital signage developers
  • Retro gaming setup creators

Buying Tip

Check that your Raspberry Pi model has a CSI-2 connector and that you have the correct FFC cable (22-pin for Pi 5, 15-pin for older models) before installation.

Elecvora expert review

Our verdict

The Geekworm X1301 is a well-designed HAT that adds HDMI input and pass-through to Raspberry Pi boards, making it a versatile tool for video capture and monitoring projects. Its stackable design and HAT+ STANDBY support add convenience for advanced users.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports HDMI input and pass-through simultaneously
  • Up to 1080p60 video capture
  • Includes FFC cables for multiple Pi models
  • Stackable with other HATs
  • HAT+ STANDBY power state compatible

Cons

  • Requires software configuration to work
  • Limited to 1080p resolution
  • No onboard audio output jack

Best for

Raspberry Pi users needing HDMI input for capture or monitoring

Not ideal for

Users looking for plug-and-play HDMI capture without setup

Specifications

Item TypeRaspberry Pi HAT
Model No. / NameX1301
CompatibilityRaspberry Pi 5, 4B, 3B+, 3B
Connector TypeCSI-2 22-pin FPC
Video Output2K Full HD (1920x1080, 60fps)
Audio input/output PortHDMI audio via I²S
Shipping Weight0.07 kg
Shipping Dimensions9 × 13 × 4 cm

What's in the box

  • 1x X1301 V1.1 HDMI to CSI-2 module
  • 2x 22-pin to 15-pin MIPI FFC 30mm (For Raspberry Pi 4B/3B+/3B)
  • 2x 22-pin MIPI FFC 30mm (For Raspberry Pi 5B)
  • 4x M2.5*19mm F/F Spacer
  • 8x M2.5*5mm Screw

Frequently Asked Questions

Which Raspberry Pi models are compatible with the X1301?
The X1301 is compatible with Raspberry Pi 5, 4B, 3B+, and 3B. It includes FFC cables for both 22-pin and 15-pin CSI-2 connectors.
Does the X1301 support audio?
Yes, HDMI audio is extracted and transmitted over I2S to the Raspberry Pi. You can capture or route audio through the I2S interface.
Can I use the HDMI pass-through while the Raspberry Pi is off?
Yes, the HDMI pass-through feature works even when the Raspberry Pi is in standby mode, allowing you to view the HDMI source on a local display.
What is included in the package?
The package includes the X1301 module, two 22-pin to 15-pin FFC cables (30mm), two 22-pin FFC cables (30mm), four M2.5*19mm spacers, and eight M2.5*5mm screws.
Does the X1301 require additional power?
No, the X1301 is powered through the Raspberry Pi's GPIO header. Ensure your Pi has a sufficient power supply for your connected peripherals.
Is the X1301 compatible with the HAT+ STANDBY feature?
Yes, the X1301 supports the HAT+ STANDBY power state, automatically turning off when the Raspberry Pi 5 shuts down.

Overview

The Geekworm X1301 is a specialized HAT for Raspberry Pi 5, 4B, 3B+, and 3B that bridges HDMI to CSI-2. It is built around the Toshiba TC358743XBG bridge chip and includes a one-to-two active HDMI splitter, so you can feed an HDMI source into the Pi while simultaneously passing the same signal through to a local TV or projector. This makes it possible to capture, process, or monitor HDMI video and audio on your Raspberry Pi without an external capture card.

Key Features

  • HDMI to CSI-2 conversion: Converts HDMI video up to 2K Full HD (1920x1080) at 60fps into a MIPI CSI-2 signal for the Raspberry Pi.
  • HDMI pass-through: The active splitter outputs the original HDMI signal to a local display, even when the Pi is in standby.
  • I2S audio: HDMI audio is extracted and transmitted over I2S to the Raspberry Pi.
  • Stackable design: The board is designed to be attached on top, allowing you to stack other HATs.
  • HAT+ STANDBY support: Compatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down.
  • Backpower protection: Prevents HDMI backpowering to the Raspberry Pi.

Specifications Explained

The X1301 uses a 22-pin FPC CSI-2 connector with 0.5mm pitch, which is the standard camera interface on newer Raspberry Pi boards. The MIPI CSI-2 interface uses four data lanes, each capable of up to 1Gbps, providing enough bandwidth for 1080p60 video. The HDMI input and pass-through both support up to 1080p at 60fps, which is ideal for typical consumer video sources. Audio is handled separately via I2S, so you can capture or route HDMI audio alongside the video. The board is compact and lightweight, making it easy to integrate into custom cases and projects.

Compatibility and Requirements

The X1301 is compatible with Raspberry Pi 5, 4B, 3B+, and 3B. It requires a Raspberry Pi with a CSI-2 connector and appropriate FFC cables, which are included for both 22-pin and 15-pin configurations. The shield is designed to be mounted on top of the Pi and can be stacked with other HATs. No additional power supply is required beyond the Raspberry Pi itself, but ensure your Pi has adequate power for your peripherals.

Typical Uses

  • Capturing HDMI video from a Blu-ray player, cable box, or satellite receiver for streaming or recording.
  • Monitoring an HDMI source on a local display while the Pi processes the video.
  • Building a custom video wall or digital signage player with Raspberry Pi.
  • Adding HDMI input to a Raspberry Pi-based media center or retro gaming setup.
  • Prototyping computer vision projects that require HDMI input.

What's in the Box

  • 1x X1301 V1.1 HDMI to CSI-2 module
  • 2x 22-pin to 15-pin MIPI FFC 30mm (for Raspberry Pi 4B/3B+/3B)
  • 2x 22-pin MIPI FFC 30mm (for Raspberry Pi 5)
  • 4x M2.5*19mm F/F spacers
  • 8x M2.5*5mm screws

Quick specs

Item Type
Raspberry Pi HAT
Model No. / Name
X1301
Compatibility
Raspberry Pi 5, 4B, 3B+, 3B
Connector Type
CSI-2 22-pin FPC
Video Output
2K Full HD (1920x1080, 60fps)
Audio input/output Port
HDMI audio via I²S
See all specifications