Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Geekworm X1300-A2 adds HDMI audio capture via I2S to your X1300 or X630 shield. It installs without soldering and includes the I2S cable and mounting hardware.

Key Highlights

  • Adds HDMI audio capture through the I2S interface
  • Compatible with X1300 (Pi 5B, CM4) and X630 (Pi 4B, 3B+, 3B)
  • 40-pin header for easy GPIO access
  • Stackable design with space reserved for a CPU heatsink
  • Includes 10-pin I2S cable and mounting hardware
  • No soldering required for installation

Ideal For

  • Raspberry Pi media centre builders
  • Audio capture and analysis hobbyists
  • X1300 and X630 shield owners
  • Custom Raspberry Pi project makers
  • Makers needing HDMI audio input without soldering

Buying Tip

Confirm you already own a compatible Geekworm X1300 or X630 shield, as this board is an add-on and will not work on its own.

Elecvora expert review

Our verdict

The Geekworm X1300-A2 is a focused add-on that solves HDMI audio capture for owners of compatible shields. It is well thought out with no-solder installation and a stackable design, though it is only useful if you already have the right shield.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Adds HDMI audio capture via I2S
  • No soldering required
  • Stackable with heatsink clearance
  • Includes cable and mounting hardware

Cons

  • Requires a compatible X1300 or X630 shield
  • Limited to specific Raspberry Pi models
  • No standalone operation

Best for

Makers with an X1300 or X630 shield who need HDMI audio input

Not ideal for

Users without a compatible Geekworm shield

Specifications

Item TypeAudio Board
Model No. / NameX1300 A2
CompatibilityX1300 (Raspberry Pi 5B, CM4), X630 (Raspberry Pi 4B, 3B+, 3B)
Audio input/output PortHDMI audio via I²S
Shipping Weight0.038 kg
Shipping Dimensions9 × 9 × 4 cm

What's in the box

  • 1x X1300-A2 V1.0 accessory board
  • 1x 10-pin I2S cable
  • 3x M2.5*14 F/F spacers
  • 6x M2.5*5 screws
  • 1x M2.5*10 screw

Frequently Asked Questions

What is the X1300-A2 used for?
It is an auxiliary board that enables HDMI audio capture via the I2S interface when used with a compatible Geekworm shield.
Which Raspberry Pi models are supported?
It supports the X1300 shield with Raspberry Pi 5B or CM4, and the X630 shield with Raspberry Pi 4B, 3B+, or 3B.
Do I need to solder anything?
No, the board installs with the included I2S cable and mounting hardware, so no soldering is required.
What is included in the package?
You get the X1300-A2 V1.0 accessory board, a 10-pin I2S cable, three M2.5*14 F/F spacers, six M2.5*5 screws, and one M2.5*10 screw.
Can I use this board without a shield?
No, it is designed as an add-on for the X1300 or X630 shield and requires one of those to operate.
Does it support a CPU heatsink?
Yes, the board has reserved space for a CPU heatsink and features a stackable design for attachment under other HATs.

Overview

The Geekworm X1300-A2 is an auxiliary audio board that brings HDMI audio capture to compatible Geekworm shields via the I2S interface. It is built to sit on top of the Raspberry Pi like a traditional HAT and provides a 40-pin header for straightforward GPIO access. Whether you are working with the X1300 shield for Raspberry Pi 5B or CM4, or the X630 shield for Raspberry Pi 4B, 3B+, or 3B, this board adds a clean digital audio path without demanding complex wiring.

Key Features

  • HDMI audio capture: Enables audio capture through the I2S interface, useful for projects that need to record or process HDMI audio.
  • Wide compatibility: Works with X1300 (Raspberry Pi 5B, CM4) and X630 (Raspberry Pi 4B, 3B+, 3B).
  • Advanced functions: Supports HDMI cable detection, bridge chip reset, and interrupt capabilities.
  • No soldering required: Simple installation with the included cable and hardware.
  • Compact and stackable: Reserved space for a CPU heatsink and a stackable design that allows attachment under other HATs.

Specifications Explained

The X1300-A2 is an audio board (model X1300 A2) that uses the I2S interface for HDMI audio input and output. In practice, this means it can capture audio embedded in an HDMI signal and make it available to your Raspberry Pi setup. The 40-pin header gives you access to the GPIO pins even with the board installed, which is helpful when you need to connect additional sensors or devices. The board also includes a 10-pin I2S cable for connecting to the host shield. Its compact shipping dimensions of 9 × 9 × 4 cm and weight of 0.038 kg reflect a small, lightweight add-on that won't add bulk to your build.

Compatibility and Requirements

The X1300-A2 is designed specifically for the Geekworm X1300 shield when used with a Raspberry Pi 5B or CM4, and for the X630 shield when used with a Raspberry Pi 4B, 3B+, or 3B. It is not a standalone audio device; it requires one of these compatible shields and a matching Raspberry Pi board. The package includes the necessary I2S cable and mounting hardware, so no additional soldering or special tools are required for installation.

Typical Uses

This board is well suited to media centre builds where HDMI audio needs to be captured for recording or streaming. It is also useful for audio analysis projects, custom Raspberry Pi setups that require digital audio input, and any application where you want to add HDMI audio capture without a bulky external sound card. The stackable design makes it a good fit for multi-HAT configurations where space is tight.

What's in the Box

  • 1x X1300-A2 V1.0 accessory board
  • 1x 10-pin I2S cable
  • 3x M2.5*14 F/F spacers
  • 6x M2.5*5 screws
  • 1x M2.5*10 screw

Quick specs

Item Type
Audio Board
Model No. / Name
X1300 A2
Compatibility
X1300 (Raspberry Pi 5B, CM4), X630 (Raspberry Pi 4B, 3B+, 3B)
Audio input/output Port
HDMI audio via I²S
Shipping Weight
0.038 kg
Shipping Dimensions
9 × 9 × 4 cm
See all specifications