
1 / 2 · Click to enlarge
At a glance
Made by Geekworm, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type Storage Expansion Board; model no. / name X872 V2.0; compatibility Raspberry Pi 4 Model B.
Key Highlights
- Item Type: Storage Expansion Board
- Model No. / Name: X872 V2.0
- Compatibility: Raspberry Pi 4 Model B
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Storage Expansion Board |
|---|---|
| Model No. / Name | X872 V2.0 |
| Compatibility | Raspberry Pi 4 Model B |
| Data Transfer Rate | 5Gbps |
| Memory type | M.2 SSD upto 4TB |
| USB Type | USB 3.1 Gen1 |
| Shipping Weight | 0.065 kg |
| Shipping Dimensions | 12 × 9 × 4 cm |
Overview
The Geekworm X872 V2.0 M.2NVME SSD Storage Expansion Board for Raspberry Pi 4, made by Geekworm, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Storage Expansion Board (space for firmware, files or media)
- Model No. / Name: X872 V2.0
- Compatibility: Raspberry Pi 4 Model B
- Data Transfer Rate: 5Gbps
- Memory type: M.2 SSD upto 4TB (more memory leaves room for larger programs and buffers)
- USB Type: USB 3.1 Gen1
- Shipping Weight: 0.065 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 12 × 9 × 4 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The X872 V2.0 is a USB 3.0 to NVMe SSD Storage Expansion Board specifically designed for the Raspberry Pi 4, providing a simple and speedy means to expand storage capacity for your Raspberry Pi 4. This compact and sleek shield facilitates effortless connection of various M.2 SSD Storage Expansion Board sizes (including 2280, 2260, 2242, and 2230) to your Raspberry Pi 4. The SuperSpeed USB 3.0 port enables rapid data transfer speeds of up to 5Gbps, allowing you to move large amounts of data within seconds. Additionally, the built-in LED light indicates the reading or writing status, eliminating the need for guesswork. Whether you aim to establish a home media center or create a Network-attached storage (NAS) system for storing and streaming your videos, music, and photos, the X872 can function as an ideal storage solution. Moreover, it supports booting the operating system from your SSD Storage Expansion Board, leading to quicker application launches, web serving, and file copying.
Features:
- Model: X872 V2.0
- Compatible with Raspberry Pi 4 Model B Only
- Supports high-capacity M.2 NVMe solid-state drives up to 4TB
- Accommodates various M.2 NVMe SSD form factors, including 2280, 2260, 2242, and 2230
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi
- Compatible with USB 2.0
- LED blue indicator indicates drive status
- Powering via both GPIO pin header and USB port, ensuring sufficient power supply without any worries
- Designed to be attached on bottom, allows using your favorite HATs alongside it Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
- PCB Size: 87.3mm x 56mm
Package include:
1x X872 V2.0 shield 1x USB3.0 Connector 4x M2.5x9.5mm F/F Spacers 4x M2.5x7+6mm F/M Spacers 4x M2.5x5mm Screws 1x M2x4mm ScrewQuick specs
- Item Type
- Storage Expansion Board
- Model No. / Name
- X872 V2.0
- Compatibility
- Raspberry Pi 4 Model B
- Data Transfer Rate
- 5Gbps
- Memory type
- M.2 SSD upto 4TB
- USB Type
- USB 3.1 Gen1



















