
1 / 5 · Click to enlarge
AI Summary
A 2.5g brushless motor for 65mm tiny and toothpick drones, rated 21000KV on 1S input. It pairs a 1002 stator with N52H magnets and 200-degree copper windings for fast, linear throttle response.
Key Highlights
- 21000KV rating for high RPM on 1S micro builds
- Lightweight 2.5g motor suits 65mm tiny and toothpick drones
- One-piece 7075 aviation aluminium rotor with anodized finish
- N52H curved magnets for strong torque and response
- 200-degree copper windings support stable running
- 9N12P slot-pole layout with 13.5A continuous current
Ideal For
- Builders of 65mm tiny whoop-style micro drones
- Toothpick drone pilots using 1.6 to 2 inch propellers
- Hobbyists assembling lightweight indoor micro quads
- Makers refreshing motors on a 1S micro build
- FPV tinkerers who want fast throttle response in small frames
Buying Tip
Confirm your frame uses the 3 x M1.4 mounting pattern and that your ESC is rated above 5A before fitting this 1S motor.
Elecvora expert review
Our verdict
A well-considered micro motor for 1S tiny and toothpick builds, with a light 2.5g body and hardware choices that target smooth, linear power delivery. It is a sensible pick if your frame and ESC already match its limits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very light at 2.5g for micro builds
- High 21000KV suits 1S tiny and toothpick drones
- One-piece 7075 aluminium rotor with anodized finish
- N52H magnets and 200-degree windings support stable running
Cons
- Limited to 1S input, so not for higher-voltage builds
- Small M1.4 mounting pattern restricts frame choice
- Requires an ESC rated above 5A and suitable propellers
Best for
1S 65mm tiny and toothpick micro drone builds
Not ideal for
Larger frames or higher-cell voltage setups
Specifications
| Motor KV (RPM/V) | 21000 KV |
|---|---|
| Motor Type | Brushless Motor |
| Continuous Discharge Current (A) | 13.5 |
| Max. Power (W) | 85 |
| Input Voltage (V) | 1s |
| Mounting Hole Diameter (mm) | 3*M1.4-∅6.6 |
| Weight (g) | 2.5 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 7 × 7 × 3 cm |
What's in the box
- 1 x 1002 21000KV motor
- 4 x M1.4 screws
Frequently Asked Questions
What voltage does this motor use?
Which drones is it suitable for?
What ESC do I need?
What is included with the motor?
What are the mounting dimensions?
How should I care for the motor?
Overview
The HGLRC SPECTER 1002 21000KV is a brushless motor made for very small drones. Its 1002 stator size and 2.5g weight place it in the micro class, and the 21000KV rating is intended for 1S input. Builders using 65mm tiny or toothpick frames will find the size and mounting pattern suited to compact airframes where every gram matters.
The motor is assembled around a one-piece rotor in 7075 aviation aluminium with an anodized two-colour finish. Inside, HGLRC uses N52H curved magnetic steel and 200-degree copper wire windings, with imported Kawasaki silicon steel sheets in the stator. The 9N12P slot-pole configuration and optimized tuning aim to keep torque available at low speed and make throttle changes feel linear.
Key Features
- 21000KV brushless motor rated for 1S input voltage
- Compact 1002 stator in a 2.5g package
- One-piece 7075 aviation aluminium rotor with anodized two-colour finish
- Customized N52H curved magnets for strong magnetism and torque
- 200-degree copper wire windings for stable running
- Alloy steel outlet shaft for strength with reduced weight
- 9N12P slot-pole layout
Specifications Explained
21000KV describes RPM per volt, so on a 1S pack this motor spins at high speed, which is what tiny and toothpick builds need for quick corrections.
13.5A continuous current and 85W maximum power set the electrical envelope. Match your ESC and propeller choice to stay within these figures rather than pushing beyond them.
Mounting holes of 3 x M1.4 with a 6.6mm diameter define the frame pattern, so check your frame before ordering. The motor measures 13.59mm in diameter and 8.25mm in height, with a 45mm lead length.
Compatibility and Requirements
Use a 1S power source and an ESC rated above 5A. Recommended propellers are 1.6 to 2 inches. The motor is intended for 65mm tiny drones and 65 toothpick drones. Four M1.4 screws are supplied for mounting.
Typical Uses
This motor suits micro quadcopter projects where low weight and fast response matter more than raw payload. It is a natural fit for indoor and close-range flying, and for builders assembling or refreshing a 65mm tiny or toothpick platform.
What's in the Box
- 1 x 1002 21000KV motor
- 4 x M1.4 screws

Quick specs
- Motor KV (RPM/V)
- 21000 KV
- Motor Type
- Brushless Motor
- Continuous Discharge Current (A)
- 13.5
- Max. Power (W)
- 85
- Input Voltage (V)
- 1s
- Mounting Hole Diameter (mm)
- 3*M1.4-∅6.6



















