
1 / 2 · Click to enlarge
At a glance
Made by HLF, this logic ic is a good fit for everyday home and hobby use. Main specs: manufacturer HLF; ic type Counter IC; voltage rating 3V to 15V. Check that your power source supplies 3V to 15V before connecting it.
Key Highlights
- Manufacturer: HLF
- IC Type: Counter IC
- Voltage Rating: 3V to 15V
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Manufacturer | HLF |
|---|---|
| IC Type | Counter IC |
| Voltage Rating | 3V to 15V |
| Case/Package | DIP 16 |
| Display Resolution (pixel) | 1280x800 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The CD4029BE-HLF-3V to 15V Binary/BCD Up/Down Counter IC, made by HLF, is listed in our logic ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: HLF
- IC Type: Counter IC
- Voltage Rating: 3V to 15V (match this to your power supply; too high a voltage can damage the part)
- Case/Package: DIP 16
- Display Resolution (pixel): 1280x800 (measured diagonally; compare with the space you have before ordering)
- Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The CD4029B is a pre settable up/down counter which counts in either binary or decade mode depending on the voltage level applied at binary/decade input. When binary/decade is at logical" 1", the counter counts in binary, otherwise it counts in decade. Similarly, the counter counts up when the up/down input is at logical" 1" and vice versa. A logical" 1" preset enable signal allows information at the " jam" inputs to preset the counter to any state asynchronously with the clock. The counter is advanced one count at the positive-going edge of the clock if the carry in and preset enable inputs are at logical" 0". Advancement is inhibited when either or both of these two inputs is at logical" 1". The carry out signal is normally at logical" 1" state and goes to logical" 0" state when the counter reaches its maximum count in the up" mode or the minimum count in the down" mode provided the carry input is at logical 0" state. All inputs are protected against static discharge by diode clamps to both VDD and VSS.
Note: Images for reference only.Features:
- Wide supply voltage range: 3V to 15V
- High noise immunity:0.45 VDD (typ.)
- Binary or BCD decade up/down counting
Package Includes:
1 x CD4029BE-HLF-3V to 15V Binary/BCD Up/Down Counter ICQuick specs
- Manufacturer
- HLF
- IC Type
- Counter IC
- Voltage Rating
- 3V to 15V
- Case/Package
- DIP 16
- Display Resolution (pixel)
- 1280x800
- Shipping Weight
- 0.001 kg


















