
1 / 3 · Click to enlarge
AI Summary
The HobbyWing QuicRun 1060 is a waterproof 60A brushed ESC for 1/10 RC cars and trucks. It delivers 60A forward and 30A reverse with a 3A/5V BEC and multiple built-in protections.
Key Highlights
- 60A continuous and 360A peak forward current
- 30A continuous and 180A peak reverse current
- Waterproof and dust-proof for all-weather driving
- Built-in 3A/5V linear BEC powers receiver and servos
- Jumper-adjustable running modes and parameters
- Low-voltage, over-heat, and signal-loss protections
Ideal For
- RC hobbyists upgrading 1/10 touring cars and buggies
- Rock crawler and trail truck builders needing waterproof brushed power
- Short course and monster truck owners running in dusty or wet conditions
- Club-level racers seeking a reliable brushed ESC with multiple protections
Buying Tip
Check your motor turn count and battery voltage against the supported combinations before buying, and confirm the ESC fits your chassis space.
Elecvora expert review
Our verdict
The HobbyWing QuicRun 1060 is a dependable brushed ESC that offers generous current handling, a useful built-in BEC, and weather resistance at a fair price. It is a solid choice for 1/10 scale brushed vehicles where simplicity and reliability matter more than advanced tuning.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 60A forward and 30A reverse continuous ratings
- Waterproof and dust-proof for all-weather use
- Built-in 3A/5V BEC simplifies wiring
- Multiple protections safeguard electronics
- Easy jumper-based adjustments
Cons
- No cooling fan included
- Linear BEC may generate heat under heavy servo loads
- Limited to brushed motors and specific turn/voltage combinations
Best for
1/10 scale brushed vehicles used in wet or dusty conditions
Not ideal for
High-power brushless setups or 4S LiPo applications
Specifications
| Item Type | Brushed ESC |
|---|---|
| BEC (Y/N) | 3A/5V (Linear Mode), Yes |
| PWM Frequency Range (KHz) | 1KHz |
| Forward Cont | Peak Current: 60A /360A |
| Reverse Cont | Peak Current: 30A /180A |
| Shipping Weight | 0.099 kg |
| Shipping Dimensions | 13 × 9 × 6 cm |
What's in the box
- 1 x Original HobbyWing QuicRun 1060 60A Brushed Electronic Speed Controller
Frequently Asked Questions
Is the QuicRun 1060 waterproof?
What motors and batteries can I use with this ESC?
Does the ESC include a cooling fan?
What is included in the package?
How do I change the running mode?
What protections does the ESC have?
Overview
The HobbyWing QuicRun 1060 is a brushed electronic speed controller designed for 1/10 scale RC vehicles. It combines a compact footprint with a built-in capacitor module and a waterproof, dust-proof housing, making it suitable for all-weather conditions. Whether you run a touring car, buggy, short course truck, monster, truggy, rock crawler, or tank, this ESC provides the current handling and control features needed for everyday brushed setups.
Key Features
- High current endurance: 60A continuous and 360A peak forward; 30A continuous and 180A peak reverse.
- Integrated BEC: Linear 5V/3A output supplies power to your receiver and servos without an external BEC.
- Weather-resistant: Waterproof and dust-proof construction supports running in various conditions.
- Simple adjustment: Jumper pins allow quick changes to running modes and ESC parameters.
- Multiple protections: Low-voltage cut-off, over-heat protection, and throttle signal loss protection.
- Compact design: Small size with a built-in capacitor module saves space in tight chassis.
Specifications Explained
The 60A continuous forward rating means the ESC can handle typical brushed motor loads in 1/10 vehicles without overheating under normal use. The 360A peak rating covers brief bursts of high current during acceleration or heavy load. Reverse is limited to 30A continuous and 180A peak, which is common for brushed ESCs and sufficient for maneuvering. The 3A/5V linear BEC provides a steady 5V supply to your radio system; keep in mind that linear BECs generate some heat, so ensure adequate airflow. A PWM frequency of 1kHz is standard for brushed motors and contributes to smooth low-speed control. The ESC supports forward/reverse/brake, forward/brake, and forward/reverse running modes, selectable via jumpers.
Compatibility and Requirements
This ESC is intended for 1/10 scale vehicles using 540 or 550 size brushed motors. With a 2S LiPo or 6-cell NiMH battery, use a motor with 12 turns or higher (or RPM below 30,000 at 7.2V). With a 3S LiPo or 9-cell NiMH battery, use a motor with 18 turns or higher (or RPM below 20,000 at 7.2V). 4S LiPo or 12-cell NiMH is not supported. The ESC does not include a cooling fan. Ensure your vehicle has space for the ESC and that connectors match your battery and motor; soldering may be required.
Typical Uses
Use the QuicRun 1060 in touring cars, buggies, short course trucks, monsters, truggies, rock crawlers, and tanks where a reliable brushed speed controller is needed. It is well suited to backyard bashing, trail runs, and club-level racing in wet or dusty conditions thanks to its waterproof and dust-proof design.
What's in the Box
Package includes: 1 x Original HobbyWing QuicRun 1060 60A Brushed Electronic Speed Controller.
Quick specs
- Item Type
- Brushed ESC
- BEC (Y/N)
- 3A/5V (Linear Mode), Yes
- PWM Frequency Range (KHz)
- 1KHz
- Forward Cont
- Peak Current: 60A /360A
- Reverse Cont
- Peak Current: 30A /180A
- Shipping Weight
- 0.099 kg




















