Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 40A fixed-wing ESC for 3-4S LiPo aircraft with a 5V/5A switch-mode BEC and 60A peak handling. It provides precise throttle control and built-in overheat and over-current protection in a compact 36g package.

Key Highlights

  • 40A continuous, 60A peak for 3-4S LiPo fixed-wing setups
  • 5V/5A switch-mode BEC powers receiver and servos
  • Overheat and over-current protection for safe operation
  • Compact 60x25x8mm, 36g design fits most airframes
  • Pre-wired 14AWG input and 16AWG output leads
  • 3.5mm female gold connectors for motor hookup

Ideal For

  • Fixed-wing pilots flying 3-4S LiPo trainer planes
  • Sport and scale aircraft builders needing a 40A ESC
  • Hobbyists upgrading to a switch-mode BEC for reliable servo power
  • Modelers with limited fuselage space seeking a compact ESC

Buying Tip

Verify your motor's maximum current draw stays below 40A continuous and that your servos' total draw does not exceed the BEC's 5A rating.

Elecvora expert review

Our verdict

The Hobbywing SKYWALKER-40A-V2 is a dependable fixed-wing ESC that balances power handling, BEC capacity, and compact dimensions. It is a solid choice for pilots who need a straightforward 40A controller with protection features.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 40A continuous and 60A peak for 3-4S setups
  • 5V/5A switch-mode BEC reduces onboard components
  • Overheat and over-current protection
  • Compact and lightweight at 36g
  • Pre-wired with quality connectors and wires

Cons

  • No programming card included for advanced settings
  • Requires soldering for battery connector
  • Limited to 3-4S LiPo, not for high-voltage setups

Best for

Fixed-wing pilots flying 3-4S LiPo models up to 40A continuous draw

Not ideal for

High-voltage or high-current applications beyond 4S or 40A continuous

Specifications

Item TypeElectronic Speed Controller
ColorBlack
Cells (LiPo)3-4S
Continuous Discharge Current (A)40
Peak Current (A)60A
BEC (Y/N)5V@5A (Switch-mode)
Wire Size (AWG)16, 14
Output Connector3.5 Gold Connectors (Female)
Size (mm)60x25x8
Weight (g)36
Shipping Weight0.055 kg
Shipping Dimensions19 × 12 × 3 cm

What's in the box

  • 1 x Hobbywing SKYWALKER-40A-V2 ESC Fixed Wing
  • 1 x User Manual

Frequently Asked Questions

What battery types does this ESC support?
It supports 3-4S LiPo batteries. Do not exceed 4S, as the ESC is not rated for higher voltages.
Can I use this ESC with a multirotor?
This ESC is specifically designed for fixed-wing aircraft. For multirotors, choose an ESC optimized for that application.
What is the BEC output and how many servos can it power?
The BEC provides 5V at up to 5A. The number of servos depends on their current draw; ensure total draw stays below 5A.
Does it come with a battery connector?
No battery connector is pre-installed; you must solder a compatible connector to the 14AWG input wires.
What is included in the package?
The package includes the Hobbywing SKYWALKER-40A-V2 ESC and a user manual.
How do I program the ESC?
Basic settings are typically programmed via transmitter stick commands; refer to the included user manual for the procedure.

Overview

The Hobbywing SKYWALKER-40A-V2 is an electronic speed controller designed specifically for fixed-wing aircraft. It handles 3-4S LiPo batteries with a 40A continuous rating and 60A peak, making it suitable for a wide range of models from trainers to sport planes. The built-in 5V/5A switch-mode BEC supplies power to your receiver and servos, simplifying your onboard electronics.

Key Features

  • Advanced control algorithms deliver smooth, precise throttle response and consistent power output.
  • Overheat protection helps prevent damage during extended high-power runs.
  • Over-current protection adds a layer of safety for your ESC and motor.
  • Compact and lightweight at 36g (60x25x8mm) for easy installation.
  • Pre-wired with 14AWG input and 16AWG output leads plus 3.5mm female gold connectors.

Specifications Explained

Current rating: 40A continuous means the ESC can handle sustained currents up to 40 amps; the 60A peak rating covers brief bursts during aggressive throttle changes. Match this to your motor and propeller combination to stay within limits.

BEC: The 5V/5A switch-mode BEC provides a stable 5V supply for your receiver and servos, rated for up to 5 amps. This is enough for most standard servo setups in fixed-wing models.

Wire and connectors: 14AWG input wires handle battery current, while 16AWG output wires connect to the motor via 3.5mm female gold connectors. Check that your motor has matching male connectors or plan to solder.

Size and weight: At 60x25x8mm and 36g, it fits into tight fuselage spaces without adding significant weight.

Compatibility and Requirements

This ESC is intended for fixed-wing aircraft using 3-4S LiPo batteries. It requires a compatible brushless motor with 3.5mm male connectors (or soldering) and a receiver that can accept a 5V BEC supply. Ensure your motor and propeller draw less than 40A continuous and 60A peak. No programming card or USB adapter is included; basic setup is typically done via transmitter stick commands.

Typical Uses

Ideal for trainer planes, sport models, scale aircraft, and other fixed-wing builds where a reliable 40A ESC with a strong BEC is needed. Its compact size suits airframes with limited internal space.

What's in the Box

  • 1 x Hobbywing SKYWALKER-40A-V2 ESC Fixed Wing
  • 1 x User Manual

Quick specs

Item Type
Electronic Speed Controller
Color
Black
Cells (LiPo)
3-4S
Continuous Discharge Current (A)
40
Peak Current (A)
60A
BEC (Y/N)
5V@5A (Switch-mode)
See all specifications