
1 / 3 · Click to enlarge
AI Summary
The HobbyWing QuicRun 1625 is a compact waterproof 25A brushed ESC for small RC cars and vehicles. It runs 2-3S LiPo or 6-9 cell NiMH packs and delivers a 5V 1A BEC output with jumper-selectable forward, reverse and brake modes.
Key Highlights
- Waterproof and dustproof housing for wet or dusty running conditions
- 25A continuous brushed ESC with 100A peak current capability
- Accepts 2-3S LiPo or 6-9 cell NiMH battery packs
- Built-in 5V 1A linear BEC powers receiver and servo
- Jumper-selectable forward, reverse and brake running modes
- Compact body with built-in capacitor module for tight installs
Ideal For
- Hobbyists building or repairing small-scale brushed RC cars
- Drivers who run in wet or dusty outdoor conditions
- Compact chassis builds where an external capacitor will not fit
- Beginners who want jumper-based mode setup and automatic throttle calibration
Buying Tip
Confirm your motor is brushed and your pack falls within 2-3S LiPo or 6-9 cell NiMH before buying, since this ESC is not intended for brushless motors.
Elecvora expert review
Our verdict
A tidy, weather-resistant brushed ESC that fits small vehicles well and keeps wiring simple thanks to the built-in capacitor and BEC. It is a sensible pick for compact brushed builds that see wet or dusty conditions.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Waterproof and dustproof housing
- Built-in capacitor module saves space
- 5V 1A BEC simplifies receiver and servo power
- Jumper-based mode selection is quick to change
- Multiple built-in protections
Cons
- Brushed motors only
- BEC limited to 1A at 5V
- Motor, battery, receiver and servo not included
Best for
Small brushed RC cars and vehicles used in wet or dusty conditions
Not ideal for
Brushless motor setups or builds needing higher BEC current
Specifications
| Item Type | Brushed ESC |
|---|---|
| Motor Type | Brushed motor |
| Supported Battery | 2-3S LiPo, 6-9 cell NiMH |
| Peak Current (A) | 100A |
| BEC (Y/N) | output, 1A/5V (Linear Mode) |
| PWM frequency | 1KHz |
| Running Modes | Forward/Reverse/Brake |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 7 × 5 × 3 cm |
What's in the box
- 1 x HobbyWing QuicRun 1625 25A waterproof brushed ESC
- 1 x User manual
Frequently Asked Questions
What type of motor does this ESC support?
Which batteries can I use?
How much power can it supply to my receiver and servo?
How do I change between forward, reverse and brake?
Is it suitable for wet conditions?
What is included in the package?
Overview
The HobbyWing QuicRun 1625 is a brushed electronic speed controller designed for small RC cars and vehicles where space is limited but dependable current delivery still matters. It pairs a 25A brushed motor rating with a 100A peak current figure, giving it headroom for short bursts of acceleration. The waterproof and dustproof enclosure lets you keep running through wet grass, puddles and dusty tracks without treating every splash as a risk.
Because the capacitor module is built in, the ESC keeps a smaller overall footprint than setups that require an external capacitor pack. A 5V 1A linear BEC output supplies your receiver and steering servo directly from the main battery, simplifying wiring in compact chassis.
Key Features
- Waterproof and dustproof construction for all-weather driving.
- 25A brushed ESC with 100A peak current for burst demands.
- Wide battery support across 2-3S LiPo and 6-9 cell NiMH packs.
- Built-in 5V 1A linear BEC to power receiver and servo.
- Jumper-based mode selection for forward, reverse and brake combinations.
- Automatic throttle range calibration to speed up first-time setup.
- Multiple protections including over-voltage, low voltage cut-off, over-heating and throttle signal loss.
Specifications Explained
Current handling
The 25A figure describes the continuous brushed current the ESC is built around, while the 100A peak rating covers brief spikes such as hard acceleration from a standstill. Matching the ESC to your motor's typical draw keeps it inside its comfort zone.
Battery support
Support for 2-3S LiPo and 6-9 cell NiMH gives you flexibility across common small-scale packs. Choose the pack that suits your chassis and motor, and stay within those cell counts.
BEC output
The linear BEC provides 1A at 5V. That is enough for a receiver and a standard steering servo in small vehicles; plan your servo choice around that 1A ceiling.
PWM frequency
A 1KHz PWM frequency is the operating characteristic of this brushed ESC and shapes how smoothly the motor is driven at partial throttle.
Running modes
Forward, reverse and brake combinations are selected with jumpers, so you can configure the ESC for a car that needs reverse or one that runs forward with brake only.
Compatibility and Requirements
This ESC is for brushed motors only. It works with 2-3S LiPo or 6-9 cell NiMH batteries and provides a 5V 1A BEC output. Running modes are set via jumpers, and throttle range calibration is automatic. No motor, battery, receiver or servo is included, so those must be sourced separately to complete your build.
Typical Uses
The QuicRun 1625 suits small-scale RC cars, buggies and trucks running brushed power systems, particularly where the chassis is tight and an external capacitor would be awkward. Its waterproof rating makes it a practical choice for wet-weather running and dusty outdoor tracks.
What's in the Box
- 1 x HobbyWing QuicRun 1625 25A waterproof brushed ESC
- 1 x User manual

Quick specs
- Item Type
- Brushed ESC
- Motor Type
- Brushed motor
- Supported Battery
- 2-3S LiPo, 6-9 cell NiMH
- Peak Current (A)
- 100A
- BEC (Y/N)
- output, 1A/5V (Linear Mode)
- PWM frequency
- 1KHz


















