Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The iFlight XING-E Pro 2306 1700KV is a durable FPV motor with a unibell, 5mm hollow shaft, and NSK bearings. Its efficient 1700KV wind makes it ideal for long-range and endurance quads.

Key Highlights

  • 1700KV wind tuned for efficiency on 6S long-range builds
  • Unibell design with high-strength 5mm steel hollow shaft
  • NSK 9x4x4mm bearings for smooth, lasting performance
  • N52H curved magnets and 12N14P configuration for consistent torque
  • Single-strand copper winding for clean power delivery
  • Standard 16x16mm mounting pattern with M3 screws included

Ideal For

  • Long-range FPV pilots building 6S quads
  • Endurance-focused flyers seeking efficiency
  • Freestyle pilots who value smooth throttle response
  • Cinematic drone builders using 5-inch or 7-inch frames

Buying Tip

Check that your ESC is rated for at least 40A per motor to safely handle the 36.66A peak current of this 1700KV motor.

Elecvora expert review

Our verdict

The iFlight XING-E Pro 2306 1700KV is a well-built motor that balances durability and efficiency. Its unibell design, quality bearings, and strong magnets make it a reliable choice for long-range and endurance pilots.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Unibell construction adds durability
  • NSK bearings for smooth operation
  • Efficient 1700KV wind for long flight times
  • Standard mounting pattern simplifies installation

Cons

  • Not intended for extreme racing due to lower KV
  • Requires soldering to ESC
  • Prop nut included but prop not included

Best for

Long-range and endurance FPV pilots

Not ideal for

Racing pilots seeking maximum top speed

Specifications

Motor TypeFPV Motor
Model No. / NameXING-E Pro 2306 Motor
Motor KV (RPM/V)1700 KV
Weight (g)33.6
Dimensions (L x W x H) mmφ29*18.7
Input Voltage25.2V
Peak Current (A)36.66A
Watts920.2W
Mounting Hole Diameter (mm)16*16 φ3mm
Shaft Diameter5mm
Shaft Length (mm)13.5 mm
MagnetsN52H Curved
Configuration12N14P
Bearing TypeNSK
Bearing Sizeφ9*φ4*4
Winding TypeSingle Strand copper winding
Shipping Weight0.044 kg
Shipping Dimensions5 × 5 × 5 cm

What's in the box

  • 1 x XING-E Pro 2306 motor
  • 4 x M3*8 screws
  • 1 x M5 flanged nylon insert lock nut

Frequently Asked Questions

What battery is recommended for this motor?
The 1700KV variant is optimised for 6S LiPo batteries, but it supports 2-6S. Always check your ESC and overall build compatibility.
Does this motor come with a propeller?
No, the package includes the motor, mounting screws, and a lock nut, but no propeller.
What is the mounting hole pattern?
It uses a 16x16mm pattern with φ3mm holes, which is common on many 5-inch frames.
Is this motor suitable for 7-inch props?
It can be used on 7-inch builds, but ensure the frame and ESC are compatible and monitor current draw.
How do I maintain the motor?
Keep it clean and check bearings periodically. Avoid crashing into dirt or water, and replace bearings if they become rough.
What is the peak current of this motor?
The peak current is 36.66A, so your ESC should be rated accordingly.

Overview

The iFlight XING-E Pro 2306 1700KV is a brushless FPV motor designed for pilots who value endurance and smooth control. As part of the XING-E Pro series, it combines proven XING performance with a focus on durability and value. The 2306 stator size offers a balance of torque and weight, while the 1700KV rating makes it particularly well suited to 6S long-range and endurance builds where efficiency is key.

Key Features

  • Unibell construction: The one-piece bell design adds strength and reduces flex under load.
  • 5mm steel hollow shaft: A robust shaft that handles the stresses of aggressive flying while keeping weight in check.
  • NSK bearings (9x4x4mm): Quality Japanese bearings for smooth rotation and longevity.
  • N52H curved magnets: High-temperature magnets that maintain performance under demanding conditions.
  • Single-strand copper winding: Provides efficient power transfer and consistent motor response.
  • 12N14P configuration: A standard 12-stator, 14-pole layout for reliable torque and smooth operation.

Specifications Explained

1700KV: This motor will spin 1700 RPM per volt applied. On a 6S battery (25.2V fully charged), that translates to a high but controllable RPM range, ideal for cruising and long flights rather than extreme racing.

Peak current 36.66A and 920.2W: These figures indicate the motor can handle significant power bursts, so choose ESCs and batteries that can supply the required current safely.

Mounting: The 16x16mm hole pattern with φ3mm holes is a common standard for 5-inch frames, making installation straightforward.

Shaft: The 5mm diameter and 13.5mm length are compatible with standard propellers and prop nuts.

Compatibility and Requirements

This motor is intended for FPV drones that accept 2306-sized motors with a 16x16mm mounting pattern. It operates on 2-6S LiPo batteries, with the 1700KV variant being optimised for 6S use. Ensure your ESC can handle the peak current of 36.66A per motor. The package includes M3 screws for mounting and an M5 flanged nylon insert lock nut for the propeller.

Typical Uses

Thanks to its efficient wind and robust build, the XING-E Pro 2306 1700KV is a great fit for long-range exploration, cinematic cruising, and endurance-focused freestyle. It is equally at home on a 5-inch or 7-inch long-range rig where flight time and reliability are priorities.

What's in the Box

  • 1 x XING-E Pro 2306 motor
  • 4 x M3*8 screws
  • 1 x M5 flanged nylon insert lock nut

Quick specs

Motor Type
FPV Motor
Model No. / Name
XING-E Pro 2306 Motor
Motor KV (RPM/V)
1700 KV
Weight (g)
33.6
Dimensions (L x W x H) mm
φ29*18.7
Input Voltage
25.2V
See all specifications