Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The iFlight BLITZ Whoop F7 AIO V1.1 is an all-in-one F7 flight controller and 55A 2-6S ESC for compact FPV builds. Its separate FC and ESC boards reduce gyro noise while the modular design simplifies repairs.

Key Highlights

  • All-in-one F7 flight controller and 55A 2-6S ESC
  • BGA-STM32F745 MCU running at 216MHz
  • ICM42688 gyroscope for precise flight control
  • 16MB onboard flash for blackbox logging
  • Separate FC and ESC boards minimise gyro noise
  • Pass-through support for DJI O3 and Caddx Vista/Polar

Ideal For

  • FPV pilots building lightweight whoop-class quads
  • Freestyle pilots needing a compact AIO with HD support
  • Cinematic builders using DJI O3 or Caddx Vista/Polar
  • Makers looking for a modular, repairable flight controller
  • Pilots upgrading to an F7 processor with blackbox logging

Buying Tip

Check that your frame and motor setup can handle the 55A constant current and that you have a compatible radio receiver and HD video system before purchasing.

Elecvora expert review

Our verdict

The iFlight BLITZ Whoop F7 AIO V1.1 packs a capable F7 processor and a 55A ESC into a compact, modular board that suits space-limited builds. Its separated board design and HD pass-through make it a practical choice for digital FPV setups.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated 55A ESC simplifies wiring
  • Separate FC and ESC boards reduce gyro noise
  • Modular PCB design aids repairs
  • HD pass-through for DJI O3 and Caddx Vista/Polar
  • 16MB blackbox flash for data logging

Cons

  • Requires soldering for motor and power connections
  • Limited to 2-6S LiPo input, not suitable for higher voltages
  • No built-in receiver, so a separate RX is needed

Best for

FPV pilots building compact whoop or lightweight freestyle quads with HD video

Not ideal for

Pilots needing a standalone flight controller for high-voltage or large-scale builds

Specifications

Item TypeFlight Controller
Model No. / NameF7 AIO V1.1
Flash Memory (MB)16 MB
Main control (MCU)BGA-STM32F745
GyroscopeICM42688
BEC Output5V 2.5A
Input VoltageSupports 2-6S LiPo
Constant Current (A)55
Burst Current (A)65
FirmwareIFLIGHT_BLITZ_F7_AIO
Shipping Weight0.045 kg
Shipping Dimensions8 × 8 × 4 cm

What's in the box

  • 1 x BLITZ F7 AIO
  • 1 x Capacitor 470uF/50V
  • 1 x XT30U Male 18AWG cable 70mm
  • 1 x 1.0-7P cable 50mm-28mm
  • 1 x 1.0-7P cable 50mm
  • 4 x M2 silicon grommets
  • 8 x M2*12mm screws
  • 8 x M2 transparent nylon nuts
  • 10 x 0.8mm black heat shrink tube 10mm

Frequently Asked Questions

What firmware does the BLITZ Whoop F7 AIO V1.1 use?
It runs the IFLIGHT_BLITZ_F7_AIO firmware target, which is compatible with Betaflight and similar flight firmware.
Can I use this AIO with DJI O3 or Caddx Vista?
Yes, it provides pass-through support for DJI O3 and Caddx Vista/Polar HD systems.
What battery voltage does it support?
It supports 2-6S LiPo input, so you can use batteries from 2S up to 6S.
Does it include a receiver?
No, a separate radio receiver is required to complete your build.
What is the BEC output?
The onboard BEC provides 5V at 2.5A for powering peripherals.
Is the flight controller repairable?
Yes, the FC PCB can be disassembled from the ESC board for easier repairs thanks to the modular design.

Overview

The iFlight BLITZ Whoop F7 AIO V1.1 is a compact all-in-one flight controller with an integrated 55A ESC, built for FPV pilots who need a capable, space-saving solution. By combining the flight controller and ESC on a single stack, it simplifies wiring and frees up room in tight frames. The board uses a BGA-STM32F745 microcontroller and an ICM42688 gyroscope, with 16MB of flash memory for blackbox data logging. It supports 2-6S LiPo input and is compatible with Betaflight and similar firmware through the IFLIGHT_BLITZ_F7_AIO target.

Key Features

  • Separated board design: Flight control and ESC boards are kept separate to reduce electrical gyro noise.
  • Modular construction: The FC PCB can be disassembled for easier repairs.
  • HD video compatibility: Pass-through support for DJI O3 and Caddx Vista/Polar HD systems.
  • Powerful processing: BGA-STM32F745 MCU runs at 216MHz for responsive performance.
  • Integrated OSD: AT7456E chip provides on-screen display without extra components.
  • Blackbox logging: 16MB onboard flash stores flight data for tuning and analysis.

Specifications Explained

MCU and gyro: The STM32F745 is a capable F7-class processor, and the ICM42688 gyroscope is known for accurate motion sensing. Together they support stable flight and precise control.

ESC current rating: The 55A constant current and 65A burst ratings indicate the ESC can handle powerful motor setups within a 2-6S LiPo range. Always match your motors and propellers to stay within these limits.

BEC output: A 5V 2.5A BEC provides power for peripherals such as receivers or HD video transmitters, reducing the need for external regulators.

Flash memory: 16MB of onboard flash allows extensive blackbox logging, useful for tuning and diagnosing flight issues.

Compatibility and Requirements

This AIO supports 2-6S LiPo input and runs the IFLIGHT_BLITZ_F7_AIO firmware target. It offers pass-through compatibility with DJI O3 and Caddx Vista/Polar HD systems. A compatible radio receiver, motors, propellers, and frame are required to complete a build. Ensure your power system stays within the 2-6S range and current limits.

Typical Uses

Thanks to its lightweight and compact design, this AIO is well suited to whoop-class frames, lightweight freestyle quads, and cinematic builds where space is limited. The HD pass-through makes it a good match for digital FPV setups.

What's in the Box

  • 1 x BLITZ F7 AIO
  • 1 x Capacitor 470uF/50V
  • 1 x XT30U Male 18AWG cable 70mm
  • 1 x 1.0-7P cable 50mm-28mm
  • 1 x 1.0-7P cable 50mm
  • 4 x M2 silicon grommets
  • 8 x M2*12mm screws
  • 8 x M2 transparent nylon nuts
  • 10 x 0.8mm black heat shrink tube 10mm

Quick specs

Item Type
Flight Controller
Model No. / Name
F7 AIO V1.1
Flash Memory (MB)
16 MB
Main control (MCU)
BGA-STM32F745
Gyroscope
ICM42688
BEC Output
5V 2.5A
See all specifications