
1 / 5 · Click to enlarge
AI Summary
A 1500KV iFlight XING2 2506 unibell motor for long-range and endurance FPV quads. It combines a titanium alloy shaft, NSK bearings and N52H curved magnets for smooth, efficient power delivery.
Key Highlights
- 1500KV winding tuned for long-range and endurance multirotors
- 5mm titanium alloy shaft with a crash-resistant 7075 aluminium bell
- NSK bearings with O-ring gap protection for smooth rotation
- Center-slotted N52H curved arc magnets for fast throttle response
- Single-strand copper winding rated at 817.5W and 33.26A peak
- 160mm 20AWG lead cable with an included motor wire protector
Ideal For
- Long-range FPV pilots building efficient multirotors
- Endurance-focused quad builders
- Freestyle pilots who prefer smooth, predictable power
- Pilots upgrading to a titanium shaft and NSK bearings
- Makers assembling custom multirotor platforms
Buying Tip
Check that your ESC can handle the 33.26A peak current and that your frame uses a 16*16 φ3mm mounting pattern before ordering.
Elecvora expert review
Our verdict
The XING2 2506 1500KV is a well-rounded endurance motor that trades top speed for efficiency and durability. Its titanium shaft, NSK bearings and curved N52H magnets make it a sensible long-term choice for long-range builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Titanium alloy shaft and 7075 aluminium bell for crash resistance
- NSK bearings with O-ring gap protection
- Efficient 1500KV winding for long-range flight
- Center-slotted N52H curved magnets for quick response
- Includes mounting hardware and a wire protector
Cons
- Requires soldering the leads to your ESC
- Propellers, ESC and battery are not included
- Lower KV limits outright racing performance
Best for
Long-range and endurance FPV pilots
Not ideal for
Pilots chasing maximum top speed in racing
Specifications
| Motor Type | FPV Motor |
|---|---|
| Motor KV (RPM/V) | 1500 KV |
| Input Voltage | 25.2V |
| Watts | 817.5W |
| Mounting Hole Diameter (mm) | 16*16 φ3mm |
| Shaft Diameter | 5 mm |
| Shaft Length (mm) | 15mm |
| Lead Cable | 160mm-20AWG |
| Configuration | 12N14P |
| Bearing Type | NSK |
| Bearing Size | φ10*φ4*4 |
| Winding Type | Single Strand copper winding |
| Magnets | N52H Curved |
| Peak Current (A) | 33.26A |
| Shipping Weight | 0.044 kg |
| Shipping Dimensions | 5 × 5 × 5 cm |
What's in the box
- 1 x XING2 2506 Motor Black (1500KV)
- 1 x M5 Flanged Nylon Insert Lock Nut
- 4 x M3*8mm screws
Frequently Asked Questions
What does the 1500KV rating mean for my build?
What voltage can this motor handle?
Will it fit my frame?
Do I need to solder anything?
What is included with the motor?
How should I care for the bearings?
Overview
The iFlight XING2 2506 is a brushless FPV motor from the XING2 line, offered here in a 1500KV version. That KV rating places it in the long-range and endurance segment, where efficient cruising and steady power matter more than extreme top-end speed. The motor uses a 12N14P configuration and accepts up to 25.2V, with a rated 817.5W output and a peak current of 33.26A.
Mechanically, the XING2 2506 pairs a 5mm titanium alloy shaft with a 7075 aluminium bell designed to resist crash damage. NSK bearings sit inside, protected by an O-ring bearing gap guard, and the motor is dynamically balanced at the factory.
Key Features
- 1500KV winding: a lower-KV option for endurance-focused builds.
- 5mm titanium alloy shaft: a strong prop shaft with a 15mm length.
- 7075 aluminium unibell: built to handle impacts.
- NSK bearings: φ10*φ4*4 size for smooth, long-lasting rotation.
- N52H curved arc magnets: center-slotted for quicker motor response.
- Single-strand copper winding: contributes to efficient power delivery.
- 160mm 20AWG lead cable: supplied with a motor wire protector.
Specifications Explained
KV describes how fast the motor spins per volt, so 1500KV is a moderate choice that favours torque and efficiency over raw RPM. The 25.2V input ceiling and 817.5W rating give you a clear picture of the power envelope, while the 33.26A peak current tells you what your ESC and battery should be able to handle.
The 16*16 φ3mm mounting pattern is the standard four-hole layout used on many FPV frames, and the 5mm shaft suits props with a matching bore. Bearing size φ10*φ4*4 refers to the NSK bearing dimensions, and the 12N14P stator layout is the 12-stator-slot, 14-pole arrangement common in this class.
Compatibility and Requirements
You will need a compatible FPV frame with a 16*16 φ3mm mounting pattern, an ESC rated for the current this motor can draw, and a battery within the 25.2V input limit. The 160mm 20AWG leads must be soldered to your ESC, and the 5mm shaft requires propellers with a matching bore. Mounting hardware is included, but the propeller, ESC, battery and radio system are not.
Typical Uses
This motor is aimed at long-range cruising, endurance flights and smooth freestyle flying on multirotors that benefit from a moderate KV. It is also a reasonable pick for pilots who value durability and predictable throttle feel over aggressive racing performance.
What's in the Box
- 1 x XING2 2506 Motor Black (1500KV)
- 1 x M5 Flanged Nylon Insert Lock Nut
- 4 x M3*8mm screws
Quick specs
- Motor Type
- FPV Motor
- Motor KV (RPM/V)
- 1500 KV
- Input Voltage
- 25.2V
- Watts
- 817.5W
- Mounting Hole Diameter (mm)
- 16*16 φ3mm
- Shaft Diameter
- 5 mm


















