Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 327mm carbon long-range frame kit for 7.5-inch FPV builds, revised in V2 for the DJI O3 Air Unit. It adds an O3 heatsink, a wider damped camera mount and a dual 5.8GHz VTX antenna mount.

Key Highlights

  • 327mm wheelbase frame for 7.5-inch long-range builds
  • 6mm arms with 3mm bottom and 2mm top plates
  • V2 O3 Air Unit heatsink for efficient cooling
  • Redesigned camera mount with TPU damping inserts
  • Dual 5.8GHz VTX antenna TPU mount included
  • 16×16mm and 19×19mm motor mounting patterns

Ideal For

  • Long-range FPV pilots building a 7.5-inch platform
  • Cinematic pilots flying a DJI O3 Air Unit setup
  • Freestyle builders wanting a stiff carbon frame
  • Makers assembling inspection or search and rescue drones
  • Hobbyists moving up from smaller 5-inch frames

Buying Tip

Confirm your motors use a 16×16mm or 19×19mm mounting pattern and that your VTX and stack fit the 30mm and 21mm maximum heights before ordering.

Elecvora expert review

Our verdict

A well-considered V2 frame for anyone building a 7.5-inch long-range drone around the DJI O3 Air Unit. The added heatsink, damped camera mount and dual antenna holder address the practical needs of cinematic and exploration builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Stiff 6mm arm and 3mm plate construction
  • O3-specific heatsink and cable included
  • Wider damped camera mount reduces vibration
  • Dual 5.8GHz VTX antenna mounting
  • Multiple motor and VTX mounting patterns

Cons

  • Motors, electronics and battery are not included
  • Builders must check stack and VTX height limits
  • Requires soldering and full electronics assembly

Best for

Long-range and cinematic FPV builders using a DJI O3 Air Unit

Not ideal for

Pilots wanting a ready-to-fly drone or a small 5-inch frame

Specifications

Product TypeChimera7 Pro V2 Frame Kit
Wheelbase327mm
Frame height(mm)34mm
Thickness of Arms6mm
Bottom Plate Thickness(mm)3mm
Top plate thickness (mm)2mm
Plate Thickness (mm)3mm
Camera plate thickness (mm)3mm
Shipping Weight0.543 kg
Shipping Dimensions23 × 22 × 7 cm

What's in the box

  • 1 x Chimera7 Pro V2 Frame Kit
  • 1 x O3 Air Unit Heatsink
  • 1 x O3 MIPI Digital Video Cable 215mm
  • 2 x O3 IPEX to RP-SMA Antenna Pigtails
  • 1 x O3 Dual Antenna TPU
  • 1 x GoPro TPU Base Mount
  • 1 x Screw Bag
  • 4 x TPU Armguard
  • 1 x Front Bumper TPU
  • 1 x Rear Bumper TPU
  • 2 x Anti-Slip Battery Pad
  • 2 x Battery Strap (20*250mm)

Frequently Asked Questions

What size propellers does this frame suit?
The 327mm wheelbase platform is intended for 7.5-inch propellers. Match your motor and propeller choice to that size when planning the build.
Is the DJI O3 Air Unit included?
No. The kit includes an O3 Air Unit heatsink, a 215mm O3 MIPI cable and O3 IPEX to RP-SMA pigtails, but the air unit itself must be purchased separately.
Which motors can I mount?
The frame supports 16×16mm and 19×19mm motor mounting patterns. Check your motor base dimensions against these before ordering.
What battery should I use?
Battery selection is up to the builder; the frame includes two 20×250mm straps and anti-slip pads for top- or bottom-mounted packs. Confirm your chosen pack fits the frame layout.
How much room is there for electronics?
Maximum flight stack height is 21mm and maximum VTX height is 30mm. VTX mounting options are 30.5×30.5mm, 25×25mm and 20×20mm.
What is in the box?
The frame kit, O3 heatsink, O3 MIPI cable, two antenna pigtails, dual antenna TPU mount, GoPro TPU base mount, screw bag, four armguards, front and rear bumpers, two battery pads and two battery straps.

Overview

The iFlight Chimera 7 Pro V2 is a frame kit for pilots building a 7.5-inch long-range FPV drone. With a 327mm wheelbase and a stiff carbon structure, it is designed to hold steady during smooth cinematic flights and extended cruising. The V2 revision focuses on the DJI O3 Air Unit: it adds a dedicated heatsink, reshaped side panels at the rear, a wider camera mount with TPU damping inserts and a TPU mount for two 5.8GHz VTX antennas.

Key Features

  • Rigid carbon layout: 6mm arms, a 3mm bottom plate, 2mm top plate, 3mm camera plate and 3mm side plates.
  • O3-ready cooling: the included O3 Air Unit heatsink helps manage heat during longer flights.
  • Improved camera mounting: the redesigned mount supports a wider field of view and uses TPU damping inserts to reduce vibration.
  • Dual antenna support: the TPU dual 5.8GHz VTX antenna mount is intended to improve signal strength and stability.
  • Protection parts: four TPU armguards plus front and rear TPU bumpers are supplied.

Specifications Explained

The 327mm wheelbase sets the overall size and suits 7.5-inch propellers, giving a larger platform than a typical 5-inch build. Arm thickness of 6mm and a 3mm bottom plate provide the stiffness that long-range frames need to limit flex and resonance. The 34mm frame height leaves room for the flight stack, with a maximum stack height of 21mm and up to 30mm for the VTX. Motor mounting supports 16×16mm and 19×19mm patterns. VTX mounting options are 30.5×30.5mm (φ3mm), 25×25mm (φ1.6mm) and 20×20mm (φ2mm), so several common video transmitter sizes can be fitted.

Compatibility and Requirements

The frame is designed around the DJI O3 Air Unit, and the kit includes an O3 MIPI digital video cable at 215mm plus two O3 IPEX to RP-SMA antenna pigtails. Motors, propellers, ESCs, flight controller, receiver, battery and radio system are not included and must be selected separately. Check that your chosen motor uses a 16×16mm or 19×19mm mounting pattern and that your stack and VTX fit within the stated maximum heights.

Typical Uses

Builders use this frame for cinematic FPV work, freestyle flying, long-range exploration, racing builds, industrial inspection, search and rescue support, and education or custom experimentation. The supplied GoPro TPU base mount and anti-slip battery pads point toward camera-carrying builds, while the two 20×250mm battery straps allow top- or bottom-mounted packs.

What's in the Box

The kit contains the Chimera7 Pro V2 frame, an O3 Air Unit heatsink, a 215mm O3 MIPI digital video cable, two O3 IPEX to RP-SMA antenna pigtails, an O3 dual antenna TPU mount, a GoPro TPU base mount, a screw bag, four TPU armguards, front and rear TPU bumpers, two anti-slip battery pads and two 20×250mm battery straps.

Quick specs

Product Type
Chimera7 Pro V2 Frame Kit
Wheelbase
327mm
Frame height(mm)
34mm
Thickness of Arms
6mm
Bottom Plate Thickness(mm)
3mm
Top plate thickness (mm)
2mm
See all specifications