Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The ISDT BCT-16 merges two XH2.54 balance ports into one MX3.0 connector for charging 10–16S LiPo and LiHV packs. It adds reverse polarity short circuit protection and clear LED status lights in a pocket sized 53.8 g body.

Key Highlights

  • Dual XH2.54 inputs combine into one 17-pin MX3.0 output
  • Supports 2×5S, 6S, 7S or 8S for a total of 10–16S
  • Works with both LiPo and LiHV battery chemistries
  • Reverse polarity short circuit protection built in
  • Blue, red and blinking red LEDs show success, run and error
  • Compact 78.7 × 67 mm body weighs just 53.8 g

Ideal For

  • FPV pilots charging large multi cell LiPo packs
  • RC hobbyists running paired battery configurations
  • Drone operators who want a tidier field charging box
  • Bench builders consolidating balance leads into one connector
  • Users of LiHV packs up to 16S total

Buying Tip

Check that both of your packs use XH2.54 balance plugs and that your charger accepts an MX3.0 or 17-pin XH2.54 input before buying.

Elecvora expert review

Our verdict

A tidy, purpose built adapter that removes a genuine annoyance from high cell count charging. It does one job, does it with polarity protection, and stays out of the way in your bag.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Cuts two balance leads down to one MX3.0 connection
  • Handles 10–16S across LiPo and LiHV packs
  • Reverse polarity short circuit protection
  • Clear three state LED feedback
  • Small and light at 53.8 g

Cons

  • Only works with XH2.54 input packs
  • Requires a charger with MX3.0 or 17-pin XH2.54 input
  • No cell voltage display on the adapter itself

Best for

Pilots charging paired high cell count LiPo or LiHV packs

Not ideal for

Users with non-XH2.54 balance connectors or low cell count single packs

Specifications

Input InterfaceXH2.54 (dual ports)
Output InterfaceMX3.0 / 17-pin XH2.54
Supported BatteryLiPo, LiHV
LED IndicatorBlue (success), Red (run), Red blink (error)
Battery Cell CountXH2.54 (2×5S/6S/7S/8S), total 10–16S
Length (mm)78.7
Width (mm)67
Weight (g)53.8
Shipping Weight0.063 kg
Shipping Dimensions8 × 7 × 2 cm

What's in the box

  • 1 × ISDT BCT-16 1–16S Smart Balance Adapter – 2×XH to MX3.0 Converter

Frequently Asked Questions

What does the BCT-16 actually do?
It combines two XH2.54 balance ports into a single MX3.0 / 17-pin XH2.54 output, so a paired pack set connects to your charger through one lead.
Which batteries can I use?
LiPo and LiHV packs in 2×5S, 6S, 7S or 8S configurations, giving a combined total of 10–16S.
Does it protect against wrong wiring?
Yes, it includes reverse polarity short circuit protection to help prevent damage from incorrect connections.
What do the LEDs mean?
Blue indicates success, solid red means the unit is running, and a blinking red light signals an error.
What is included in the package?
One ISDT BCT-16 1–16S Smart Balance Adapter – 2×XH to MX3.0 Converter.
How should I store it?
Keep it dry and free of debris, and check the connectors for damage before each charging session.

Overview

The ISDT BCT-16 is a smart balance adapter built to tidy up high cell count charging. Instead of juggling two separate balance leads, it takes two XH2.54 inputs and routes them through a single 17-pin MX3.0 output, so a paired pack set reaches your charger through one connector.

It is aimed at RC and FPV users who regularly work with large LiPo or LiHV configurations and want a cleaner, more repeatable bench setup without adding bulk to their gear bag.

Key Features

  • Two into one: dual XH2.54 ports feed a single MX3.0 connector.
  • Wide cell range: accepts 2×5S, 6S, 7S or 8S packs for a 10–16S total.
  • Chemistry support: designed for LiPo and LiHV batteries.
  • Protection: reverse polarity short circuit protection helps prevent damage from incorrect wiring.
  • Status LEDs: blue for success, red for running, blinking red for error.
  • Travel friendly: 78.7 × 67 mm footprint and 53.8 g weight.

Specifications Explained

The input side uses two XH2.54 balance ports. Each port accepts a 5S, 6S, 7S or 8S pack, and together they form a 10–16S total, which is what makes the adapter useful for split or paired high voltage setups.

Output runs through an MX3.0 / 17-pin XH2.54 interface, giving your charger one consolidated connection point. The LED indicator is your quick health check: blue means success, solid red means the unit is running, and a blinking red light signals an error.

At 78.7 mm long, 67 mm wide and 53.8 g, the adapter stays light enough to leave permanently attached to a charge lead or drop into a tool case.

Compatibility and Requirements

The BCT-16 supports LiPo and LiHV batteries only, in 2×5S, 6S, 7S or 8S arrangements totalling 10–16S. Your packs must use XH2.54 balance connectors, and your charger or balance setup must accept an MX3.0 / 17-pin XH2.54 connection. Always confirm polarity before connecting.

Typical Uses

Ideal on the charging bench for large multi cell packs, for pilots running paired battery configurations, and for anyone who wants to reduce loose balance leads in a field charging box.

What's in the Box

  • 1 × ISDT BCT-16 1–16S Smart Balance Adapter – 2×XH to MX3.0 Converter

Quick specs

Input Interface
XH2.54 (dual ports)
Output Interface
MX3.0 / 17-pin XH2.54
Supported Battery
LiPo, LiHV
LED Indicator
Blue (success), Red (run), Red blink (error)
Battery Cell Count
XH2.54 (2×5S/6S/7S/8S), total 10–16S
Length (mm)
78.7
See all specifications