
1 / 3 · Click to enlarge
AI Summary
A dual-channel ISDT charger that pushes 2x400W from AC or 2x600W from DC, with 20A per channel for 1-8S lithium and other chemistries. Two independent outputs let you charge two packs at once instead of queuing them up.
Key Highlights
- Dual independent channels, each up to 20A charge current
- 2x400W on AC input, 2x600W on DC input
- Supports 1-8S LiPo, LiFe and LiIon plus NiMH and Pb
- Bluetooth control and monitoring via the ISD Link app
- BattAir support, cycle mode and storage mode built in
- Aluminium alloy shell with advanced air duct cooling
Ideal For
- FPV pilots charging multiple flight packs before a session
- RC car and boat racers cycling packs between heats
- Hobbyists maintaining mixed LiPo, LiFe, LiIon and NiMH batteries
- Bench users who want AC and DC input in one charger
- Pilots using the ISD Link app for remote charger control
Buying Tip
Check that your DC power supply stays within the 10-30V input range and can deliver enough current if you plan to use the full 2x600W DC output.
Elecvora expert review
Our verdict
The K4 is a serious two-channel charger for hobbyists who regularly work with several packs and want strong power from either mains or a DC supply. Its app control and battery maintenance modes add convenience on top of the core charging capability.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two independent 20A channels reduce charging queues
- High 2x400W AC and 2x600W DC output
- Broad chemistry and cell-count support
- Bluetooth app control and BattAir support
- Aluminium shell with dedicated cooling design
Cons
- Full DC output depends on a capable external supply
- Discharge power of 30W x2 is modest for load testing
- Bluetooth features need a compatible mobile device
Best for
Pilots and racers charging multiple large packs at once
Not ideal for
Buyers who only need a small single-pack trickle charger
Specifications
| Charge Current Range (A) | 0.2 to 20Ax2 |
|---|---|
| Dischage Current Range (A) | 0.2 to 3Ax2 |
| Model No. / Name | K4 |
| Power Rating | 2x400W AC / 2x600W DC, 20A x2 |
| Supported Cell Chemistry | LiPo ,LiFe , LiIon , NiMH , Pb |
| Supported Cell Series | 1–8S Li-based, 1–18S NiMH, Pb |
| Channel | 2 |
| Input Voltage (V) | AC 100~240V / DC 10~30V |
| Output Voltage | DC 1~30V |
| Max Current (A) | DC 35A |
| Balance Current(mA) | 1.5A/Cell Max |
| Discharging Power (W) | 30W x2 |
| Charging Power (W) | AC 400W / DC 600W x2 |
| Operating Temperature (°C) | 0~40℃ |
| Storage Temperature (°C) | -20℃~60℃ |
| Shipping Weight | 1.67 kg |
| Shipping Dimensions | 26 × 23 × 9 cm |
What's in the box
- 1 x ISDT K4 Dual-Channel 2x400W AC / 2x600W DC High-Power Charger
Frequently Asked Questions
How many batteries can the K4 charge at once?
What chemistries does the K4 support?
What input voltage can I use?
How much power does each channel deliver?
Can I control the charger from my phone?
What is included with the charger?
Overview
The ISDT K4 is a two-channel charger designed for hobbyists whose battery collection has outgrown a single-output unit. Each channel runs independently, so you can charge two packs side by side rather than one after another. Power output is rated at 2x400W when fed from an AC wall outlet and 2x600W when connected to a DC supply, with a charge current range of 0.2 to 20A per channel.
Because the K4 accepts both AC 100-240V and DC 10-30V input, it works on a bench at home and from a suitable DC source in the field. An IPS LCD keeps settings and cell data readable, and Bluetooth support lets you operate the charger remotely through the ISD Link app.
Key Features
- Two independent channels: charge two batteries at the same time with separate settings.
- High power on either input: 2x400W AC or 2x600W DC, up to 20A per channel.
- Wide chemistry support: LiPo, LiFe, LiIon, NiMH and Pb.
- BattAir support: works with the BattAir ecosystem for battery data handling.
- Cycle and storage modes: useful for keeping packs in condition between sessions.
- Safety alarms: alerts for abnormal voltage and incorrect cell count settings.
- Cooling design: advanced air duct layout for heat dissipation during high-power work.
- Settings memory: remembers charging parameters for faster repeat sessions.
- USB-C fast charge: convenient for charging other devices.
Specifications Explained
Power rating: the 2x400W AC figure is the ceiling when running from mains, while 2x600W DC is available only with a DC input within 10-30V. Plan your charge rates around the input you actually use.
Current: 0.2-20A per channel covers small packs at gentle rates and large packs at higher rates. Output voltage spans DC 1-30V, and maximum DC current is listed at 35A.
Balance current: up to 1.5A per cell helps bring lithium cells into line during balance charging.
Discharging: discharge current is 0.2-3A per channel with 30W x2 discharge power, so the K4 is suited to storage discharging rather than fast load testing.
Cell counts: 1-8S for lithium chemistries, 1-18S for NiMH, and Pb support as listed.
Compatibility and Requirements
The K4 accepts AC 100-240V or DC 10-30V input. Supported chemistries are LiPo, LiFe, LiIon, NiMH and Pb, with 1-8S lithium series, 1-18S NiMH and Pb packs. Operating temperature is 0-40 degrees Celsius, and storage temperature is -20 to 60 degrees Celsius. Bluetooth features require the ISD Link app on a compatible mobile device.
Typical Uses
FPV pilots charging several flight packs before a session, RC car and boat users topping up between runs, and bench hobbyists who work with mixed lithium and NiMH batteries will all find the two-channel layout practical. Storage and cycle modes make it easier to look after packs during longer breaks from the hobby.
What's in the Box
- 1 x ISDT K4 dual-channel charger

Quick specs
- Charge Current Range (A)
- 0.2 to 20Ax2
- Dischage Current Range (A)
- 0.2 to 3Ax2
- Model No. / Name
- K4
- Power Rating
- 2x400W AC / 2x600W DC, 20A x2
- Supported Cell Chemistry
- LiPo ,LiFe , LiIon , NiMH , Pb
- Supported Cell Series
- 1–8S Li-based, 1–18S NiMH, Pb



















