
1 / 5 · Click to enlarge
At a glance
Made by ISDT, this isdt charger/discharger and accessories is a good fit for everyday home and hobby use. Main specs: charge current range (a) 0.2 to 10; display 2.4-inch Super IPS LCD; power rating 2×250 W (500 W), 10 A×2, 16 A sync. Check that your power source supplies 10 to 30 before connecting it.
Key Highlights
- Charge Current Range (A): 0.2 to 10
- Display: 2.4-inch Super IPS LCD
- Power Rating: 2×250 W (500 W), 10 A×2, 16 A sync
Ideal For
- Charging phones and gadgets
- Spare cable for travel
- Bench power
Buying Tip
Match the battery chemistry, voltage and connector to your device, and charge it only with a charger made for that chemistry.
Specifications
| Charge Current Range (A) | 0.2 to 10 |
|---|---|
| Display | 2.4-inch Super IPS LCD |
| Power Rating | 2×250 W (500 W), 10 A×2, 16 A sync |
| Supported Cell Chemistry | LiPo , LiFe , LiHV , NiMH ,Pb |
| Supported Cell Series | 1–6S Li‑batteries |
| Channels | 2, 1 |
| Operating Temperature (°C) | 0-40° |
| Storage Temperature (°C) | -20-60° |
| Input Voltage (VDC) | 10 to 30 |
| DC Output Voltage (V) | 1 to 26.4 |
| Input current | 20 to 35 |
| Dimensions (L x W x H) mm | 90.5 x 90.5 x 47 |
| Shipping Weight | 0.35 kg |
| Shipping Dimensions | 11 × 11 × 6 cm |
Overview
The ISDT P10 2‑Channel 500 W DC Smart Charger – 10 A×2 (16 A sync), Supports 1–6S LiPo/LiFe/LiHV/NiMH/Pb, IPS LCD, made by ISDT, is listed in our isdt charger/discharger and accessories range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Charge Current Range (A): 0.2 to 10 (quoted range is usually line-of-sight; walls and interference shorten it)
- Display: 2.4-inch Super IPS LCD (measured diagonally; compare with the space you have before ordering)
- Power Rating: 2×250 W (500 W), 10 A×2, 16 A sync
- Supported Cell Chemistry: LiPo , LiFe , LiHV , NiMH ,Pb (confirm your cable or board uses the same connector)
- Supported Cell Series: 1–6S Li‑batteries (confirm your cable or board uses the same connector)
- Channels: 2, 1
- Operating Temperature (°C): 0-40°
- Storage Temperature (°C): -20-60° (space for firmware, files or media)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The ISDT P10 Smart LiPo Charger is designed for high-performance battery management, making it an essential tool for RC enthusiasts and professionals. With dual-channel capabilities, this charger can efficiently charge two batteries simultaneously, providing a maximum output of 250W per channel. Equipped with an intelligent high-speed processor, the P10 ensures that charging parameters are isolated for each port, maximizing charging efficiency and performance. It also features synchronous parallel charging, allowing for a combined maximum power of 400W and a charging current range of up to 16A, enabling rapid charging for various battery types. 
Features:
- Synchronous balance, 2.4″ IPS, magnesium shell, parallel mode
- Dual Channel Output: Charge two batteries simultaneously with independent settings.
- High Power Capability: Maximum charging power of 250W per channel for fast charging.
- Synchronous Parallel Charging: Up to 400W and 16A for rapid battery charging.
- Large Display: 2.4-inch Super IPS LCD screen for clear visibility of charging information.
- Enhanced Heat Dissipation: Optimized convection air duct design for improved cooling efficiency.
- USB Firmware Updates: Easily upgrade firmware via USB-C for the latest features.
- Wide Compatibility: Supports LiFe, LiIon, LiPo, LiHv (1-6S), Pb (1-10S), and NiMH/Cd (1-16S) batteries.
Package Includes:
1 x ISDT P10 2‑Channel 500 W DC Smart Charger – 10 A×2 (16 A sync), Supports 1–6S LiPo/LiFe/LiHV/NiMH/Pb, IPS LCD
Quick specs
- Charge Current Range (A)
- 0.2 to 10
- Display
- 2.4-inch Super IPS LCD
- Power Rating
- 2×250 W (500 W), 10 A×2, 16 A sync
- Supported Cell Chemistry
- LiPo , LiFe , LiHV , NiMH ,Pb
- Supported Cell Series
- 1–6S Li‑batteries
- Channels
- 2, 1



















