
1 / 3 · Click to enlarge
AI Summary
The ISDT PC-4860S is a 4-port XT60 parallel charging board for 1–8S LiPo, LiFe, NiMH and NiCd packs, rated at 40 A input and 30 A per port. Its machined aluminium case with 32 fuses adds short-circuit and heat protection to busy charging benches.
Key Highlights
- Four XT60 outputs for parallel charging multiple packs
- Supports 1–8S LiPo, LiFe, NiMH and NiCd batteries
- 40 A input and 30 A per port for high-current setups
- 32 fuses and aluminium case for short-circuit protection
- Compact 85 × 58 mm body, lighter than the PC-4860
- 150 mm cables with XT60 plugs for flexible positioning
Ideal For
- FPV pilots charging multiple 6S packs before a session
- RC car and boat racers preparing several battery sets
- Hobbyists with mixed LiPo, LiFe, NiMH and NiCd packs
- Workshop users who want a tidy parallel charging setup
Buying Tip
Check that your charger's output current and your battery packs' combined charge rate stay within the board's 40 A input and 30 A per-port ratings before parallel charging.
Elecvora expert review
Our verdict
The ISDT PC-4860S is a well-built parallel charging board that combines high current ratings with a safety-focused aluminium case and fused outputs. It is a sensible choice for hobbyists who regularly charge several packs at once and want a compact, durable solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four XT60 outputs with 30 A per-port rating
- Supports a wide range of chemistries from 1–8S
- 32 fuses and aluminium case for added safety
- Compact and lighter than the previous PC-4860
Cons
- Requires a compatible charger and XT60-equipped batteries
- Parallel charging demands packs of the same cell count and similar state of charge
Best for
Hobbyists who parallel charge multiple XT60 battery packs regularly
Not ideal for
Users who need a standalone charger or only charge one pack at a time
Specifications
| Model No. / Name | PC-4860S |
|---|---|
| Supported Battery | 1–8 S LiPo,LiFe,NiMH,NiCd |
| Channel | 4 outputs |
| Input current | 40A |
| Output Current (A) | 30A/Port |
| Max Current (A) | 2A |
| Plug Type | XT60 |
| Cable Length | 150 mm |
| Length (mm) | 85 |
| Width (mm) | 58 |
| Weight (g) | 247.5 g (total) |
| Shipping Weight | 0.25 kg |
| Shipping Dimensions | 10 × 7 × 5 cm |
What's in the box
- 1 x ISDT PC-4860S 1–8S Safe XT60 Parallel Charging Board – 4 Port, 30 A/port
- 1 x XT60 Charging Cable
- 1 x 6S LiPo Battery Cable
Frequently Asked Questions
What battery types does the ISDT PC-4860S support?
How many batteries can I charge at once?
What are the current ratings of the board?
What is included in the box?
Do I need a special charger to use this board?
How should I care for the board?
Overview
The ISDT PC-4860S is a parallel charging board that lets you connect up to four battery packs to one compatible charger through XT60 plugs. It is built for hobbyists who want to prepare several packs at once, whether for a flying session, a race day or a workshop bench. The board accepts 1–8S LiPo, LiFe, NiMH and NiCd batteries and is rated for 40 A input with up to 30 A per port.
Its machined aluminium case is designed to resist fire and protect against short circuits, while 32 internal fuses add a layer of safety. The layout uses a scientific segmentation design that aids heat dissipation and keeps the board comfortable to handle. At 85 × 58 mm and 247.5 g total, it is compact enough to store easily and lighter than the earlier PC-4860 model.
Key Features
- Four XT60 outputs: charge four packs in parallel from a single charger output.
- Wide chemistry support: works with 1–8S LiPo, LiFe, NiMH and NiCd batteries.
- High current ratings: 40 A input and 30 A per port for demanding charge sessions.
- Safety-focused build: 32 fuses and an aluminium case help guard against short circuits and heat.
- Compact and durable: CNC-machined body with a reasonable size for bench use.
- Ready to connect: 150 mm cables with XT60 plugs.
Specifications Explained
1–8S support means the board can handle packs from one cell up to eight cells in series, covering small park-flyer batteries through to larger multirotor and aircraft packs. 40 A input is the maximum current the board is rated to accept from your charger, while 30 A per port indicates the current each output can carry. The XT60 plug type is a common connector for RC batteries and chargers, so the board fits many existing setups without adapters. 32 fuses are distributed across the board to help isolate faults, and the aluminium case contributes to heat dissipation and fire resistance. The 150 mm cable length gives a little flexibility when placing the board near your charger.
Compatibility and Requirements
The PC-4860S is intended for use with a compatible charger that can supply the required input current and work with the battery chemistry you are charging. It supports 1–8S LiPo, LiFe, NiMH and NiCd packs and uses XT60 connectors. You will need a charger with an XT60 output or a suitable adapter, and your batteries must also use XT60 plugs or be adapted to them. Always confirm that your charger and batteries are rated for the currents you plan to use.
Typical Uses
This board is useful for parallel charging several packs before a flying session, preparing batteries for a race or event, and keeping a workshop bench organised. It suits FPV pilots, RC car and boat users, and anyone who regularly cycles multiple NiMH or NiCd packs. The compact size makes it easy to transport in a field bag or tool case.
What's in the Box
- 1 × ISDT PC-4860S 1–8S Safe XT60 Parallel Charging Board
- 1 × XT60 charging cable
- 1 × 6S LiPo battery cable

Quick specs
- Model No. / Name
- PC-4860S
- Supported Battery
- 1–8 S LiPo,LiFe,NiMH,NiCd
- Channel
- 4 outputs
- Input current
- 40A
- Output Current (A)
- 30A/Port
- Max Current (A)
- 2A



















