Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual H-bridge driver IC in a 16-pin PowerDIP package that lets logic-level signals control DC motors or a bipolar stepper motor. It runs from 4.5V to 36V and includes internal clamp diodes for inductive loads.

Key Highlights

  • Dual H-bridge channels drive two DC motors or one stepper
  • Wide 4.5V to 36V supply voltage range
  • Up to 2A maximum operating current
  • Accepts standard TTL and DTL logic levels
  • Internal clamp diodes protect inductive load switching
  • Through-hole PowerDIP-16 package for easy prototyping

Ideal For

  • Students learning H-bridge and motor control basics
  • Makers building small DC motor robot projects
  • Hobbyists driving bipolar stepper motors
  • Prototypers needing a through-hole motor driver
  • Educators assembling classroom electronics kits

Buying Tip

Confirm your motor's stall current stays within the driver's 2A limit and allow for heatsinking if it will run continuously near that figure.

Elecvora expert review

Our verdict

The L293D remains a dependable, easy-to-understand motor driver for small projects, with a wide voltage window and built-in clamp diodes that simplify inductive loads. It is not a high-efficiency choice for heavy or continuous duty, but it is excellent for learning and light motion control.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 4.5V to 36V supply range
  • Two H-bridges in one compact package
  • Internal clamp diodes reduce external parts
  • Through-hole pins suit breadboards and prototyping

Cons

  • Bare IC only, no socket or heatsink included
  • 2A limit is modest for larger motors
  • Some voltage drop across the bridge at higher currents

Best for

Small DC and stepper motor projects and learning motor control

Not ideal for

High-power or continuous heavy-duty motor driving

Specifications

ManufacturerGeneric
Case/PackagePowerDIP 16
Mounting TypeThrough Hole
No. of Drivers1
No. of Outputs2
Max. Supply Voltage (V)36
Min Supply Voltage4.5
Max. Operating Current (A)2
Operating Temperature (°C)-40 to 130
Dimensions (L x W x H) mm19.20 x 7.97 x 3.26
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x L293D PowerDIP-16 motor driver IC

Frequently Asked Questions

Can the L293D drive two motors at once?
Yes. It contains two H-bridges, so two DC motors can be driven simultaneously in either direction, or both bridges can be used together for one bipolar stepper motor.
What supply voltage does it need?
It operates from 4.5V to 36V, with a separate logic supply input so the control side can run at a lower voltage than the motor side.
How do I stop a motor with this IC?
Applying matching logic levels to an input pair stops the corresponding motor, and pulling the enable pin low puts the outputs into a high-impedance state.
Does it include protection diodes?
Yes, internal clamp diodes are built in to handle the voltage spikes produced when switching inductive loads such as motor coils, relays and solenoids.
What is included in the package?
The listing covers the L293D IC itself. No socket, heatsink, headers or wiring is supplied, so plan for those separately.
How should I handle and store it?
Treat it as an ESD-sensitive part: keep it in antistatic packaging, avoid touching the pins, and store it away from moisture and static-prone surfaces.

Overview

The L293D is a monolithic four-channel driver IC arranged as two H-bridges, packaged in a 16-lead PowerDIP with through-hole pins. Its job is simple but essential: it takes a low-current control signal from a microcontroller or logic circuit and uses it to switch a much larger current through a motor coil, relay or solenoid. Each bridge can reverse polarity, so a DC motor can run forwards or backwards, and a bipolar stepper can be stepped coil by coil.

Separate logic and load supplies are provided, and the enable inputs allow each driver to be turned on or off independently. When an enable pin is low, the associated outputs go to a high-impedance state, which is useful for stopping motion without removing power.

Key Features

  • Two H-bridge drivers with two outputs, driving one motor per bridge
  • Supply range of 4.5V to 36V with a maximum operating current of 2A
  • Standard TTL and DTL logic-level inputs for easy interfacing
  • Internal clamp diodes for inductive load switching
  • Operating temperature range of -40°C to 130°C
  • Compact 19.20 x 7.97 x 3.26 mm body for dense boards

Specifications Explained

The 4.5V to 36V supply range covers small 5V robotics projects as well as higher-voltage motor setups, giving the part unusual flexibility for its size. The 2A maximum operating current figure describes the device limit rather than a guarantee for every load, so check your motor's stall current before committing. Logic inputs accept standard TTL and DTL levels, meaning common 5V microcontrollers can drive it directly. The -40°C to 130°C operating range suits indoor and sheltered outdoor builds. The 16-pin PowerDIP body has four centre pins tied together for heatsinking, which helps when the driver works hard.

Compatibility and Requirements

The L293D expects logic-level control signals and a separate motor supply within the stated voltage window. It mounts through holes, so it suits breadboards, prototyping board and custom PCBs rather than surface-mount layouts. Because it is a bare IC, you will need a socket or direct soldering, plus decoupling and wiring appropriate to your load. No headers, heatsink or connectors are supplied.

Typical Uses

Common applications include small DC motor drives, bipolar stepper motor control, relay and solenoid switching, and line-following or obstacle-avoiding robot projects. It is also a practical teaching part for anyone learning how H-bridges, enable pins and direction logic work.

Quick specs

Manufacturer
Generic
Case/Package
PowerDIP 16
Mounting Type
Through Hole
No. of Drivers
1
No. of Outputs
2
Max. Supply Voltage (V)
36
See all specifications