
1 / 4 · Click to enlarge
AI Summary
The L78M09CV is a fixed 9V positive voltage regulator in a TO-220 package, capable of delivering up to 500mA. It provides stable on-board regulation with built-in thermal and short-circuit protection.
Key Highlights
- Fixed 9V positive output for consistent voltage supply
- Input range of 7V to 35V accommodates various sources
- Up to 500mA output current for small to medium loads
- Thermal overload and short-circuit protection built in
- TO-220 through-hole package for easy mounting and heatsinking
Ideal For
- Electronics hobbyists building breadboard prototypes
- Repair technicians replacing faulty regulators
- Design engineers needing local voltage regulation
- Students learning about linear power supplies
- Makers powering 9V logic circuits and sensors
Buying Tip
Remember that the input voltage must be at least 11V to maintain a stable 9V output at full load, and consider adding a heatsink if you plan to draw close to 500mA continuously.
Elecvora expert review
Our verdict
The L78M09CV is a dependable, easy-to-use linear regulator for projects that need a stable 9V supply at modest currents. Its built-in protection features add peace of mind, though efficiency is low for large voltage drops.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple three-terminal design requires minimal external components
- Built-in thermal and short-circuit protection
- Standard TO-220 package is easy to mount and heatsink
- Fixed output eliminates adjustment circuitry
Cons
- Linear design wastes power as heat when input voltage is much higher than output
- Maximum output current of 500mA may be insufficient for high-power devices
- Requires a minimum input of 11V for full regulation at 9V output
Best for
Low-power 9V regulation in DIY and repair projects
Not ideal for
High-current or battery-powered applications where efficiency is critical
Specifications
| Case/Package | TO2203 |
|---|---|
| Mounting Type | Through Hole |
| Model Series | L78M |
| No. of Outputs | 1 |
| Output Type | Fixed |
| Polarity | Positive |
| Input Voltage (V) | 7V to 35V |
| Output Voltage | 9 |
| Max. Operating Current (A) | 500 mA |
| Operating Temperature (°C) | 0 to 125 |
| Load Regulation | 180 mV |
| Line Regulation | 180 mV |
| Dimensions (L x W x H) mm | 10.4 x 4.6 x 9.15 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x L78M09CV (L7809CV) TO-220 Linear Voltage Regulator
Frequently Asked Questions
What is the output voltage of the L78M09CV?
What input voltage range does it accept?
How much current can it deliver?
Does it have built-in protection?
What is included in the package?
Do I need a heatsink?
Overview
The L78M09CV is a three-terminal linear voltage regulator that provides a fixed 9V positive output. Housed in a standard TO-220 package, it is designed for through-hole mounting, making it suitable for prototyping, DIY projects, and production PCBs. This regulator offers local on-card regulation, which helps eliminate distribution problems associated with single-point regulation. With an input voltage range of 7V to 35V and a maximum output current of 500mA, it is a practical choice for a wide range of electronic circuits.
Key Features
- Fixed 9V output: Provides a stable positive voltage for your circuit.
- Wide input range: Accepts 7V to 35V DC input, giving flexibility in power source selection.
- 500mA output current: Supports small to medium current loads when adequate heatsinking is provided.
- Protection circuitry: Includes thermal overload shutdown, internal short-circuit current limiting, and output transistor safe-area compensation.
- TO-220 package: Through-hole mounting for easy soldering and replacement.
Specifications Explained
The L78M09CV delivers a fixed 9V output, meaning no external resistors are needed to set the voltage. The input voltage can range from 7V to 35V, but note that the dropout voltage is 2V, so the input must be at least 11V to maintain regulation at full load. The maximum operating current is 500mA, which is sufficient for many logic circuits, sensors, and small motors. Line regulation and load regulation are both 180mV, indicating the output remains stable despite input voltage variations or load changes. The operating temperature range is 0°C to 125°C, and thermal protection shuts down the device if it overheats.
Compatibility and Requirements
This regulator requires an input voltage between 7V and 35V DC. For reliable 9V output, the input should be at least 11V to account for the 2V dropout. The TO-220 package is compatible with standard through-hole PCB footprints and can be mounted to a heatsink for improved thermal performance. No external components are required for basic operation, though input and output capacitors are recommended for stability in practical circuits.
Typical Uses
The L78M09CV is commonly used in power management applications, including DIY electronics, breadboard prototypes, repair and replacement in existing equipment, and educational projects. It is ideal for providing a regulated 9V rail from a higher unregulated DC source, such as a battery or wall adapter.
What's in the Box
1 x L78M09CV (L7809CV) TO-220 Linear Voltage Regulator.
Quick specs
- Case/Package
- TO2203
- Mounting Type
- Through Hole
- Model Series
- L78M
- No. of Outputs
- 1
- Output Type
- Fixed
- Polarity
- Positive













