
1 / 3 · Click to enlarge
AI Summary
This RP-SMA male to RP-SMA female adapter connects reverse-polarity SMA interfaces in WiFi and RF systems. It handles 0–3 GHz with VSWR under 1.5 and 10 W power for stable, low-loss links.
Key Highlights
- RP-SMA male to RP-SMA female reverse-polarity adapter
- Frequency range 0 to 3 GHz for WiFi and RF use
- VSWR below 1.5 for low signal reflection
- 10 W power handling for typical RF setups
- Teflon insulators and silicone rubber clamp gaskets
- Operates from -30°C to 60°C, 5–95% humidity
Ideal For
- WiFi and WLAN installers working with RP-SMA hardware
- RF technicians building short interconnect runs
- Makers and hobbyists assembling wireless projects
- Field engineers maintaining microwave and communication gear
- Buyers needing a compact reverse-polarity SMA adapter
Buying Tip
Confirm that both sides of your connection are RP-SMA (reverse-polarity), not standard SMA, because the genders are reversed and the two types will not mate.
Elecvora expert review
Our verdict
A well-specified reverse-polarity SMA adapter for WiFi and RF work, with useful 3 GHz coverage and low VSWR. It is a sensible spare to keep for RP-SMA interconnects, provided you confirm gender before ordering.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Covers 0–3 GHz with VSWR below 1.5
- 10 W power handling suits common RF levels
- Teflon insulators and silicone gaskets
- Low contact resistance for signal integrity
Cons
- Only fits RP-SMA interfaces, not standard SMA
- Power rating is limited to 10 W
- Operating temperature range tops out at 60°C
Best for
WiFi and RF users needing a short RP-SMA male-to-female link
Not ideal for
High-power transmission or standard SMA connections
Specifications
| Manufacturer | Generic |
|---|---|
| Frequency Rating | 0 to 3GHz |
| Operating Voltage (V) | 170 – 335 VRMS (depends on cable) |
| Dielectric Withstanding (V) | 500-1000 VRMS (depends on cable) |
| VSWR | < 1.5 |
| Contact Resistance (ohm) | Centre: 6 milliohm Outer: 2 milliohm |
| Power Handling (W) | 10 |
| Insulator Resistance | 500 Megaohms |
| Gender | Female, Male |
| Insulators | Teflon |
| Additional Specs. | Clamp Gaskets: Silicone rubber |
| Operating Temperature (°C) | -30° to 60° C, Humidity: 5 – 95% |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x RPSMA Male To RPSMA Female Adapter
Frequently Asked Questions
What is the difference between RP-SMA and standard SMA?
What frequency range does this adapter support?
How much power can it handle?
What is included in the package?
What are the operating conditions?
How should I care for the adapter?
Overview
The LAMBDOID RP-SMA Male to RP-SMA Female Adapter is a reverse-polarity SMA connector designed to bridge an RP-SMA male interface and an RP-SMA female jack. In RP-SMA, the male side carries the female receptacle while the female side carries the centre pin, so this adapter preserves that reversed mating scheme. It is a practical part for WiFi and WLAN equipment, microwave hardware and digital communication systems where a short, dependable RF connection is required.
Key Features
- Reverse-polarity SMA male to RP-SMA female configuration
- Rated from 0 to 3 GHz with VSWR below 1.5
- 10 W power handling for common RF power levels
- Teflon insulators for electrical stability
- Silicone rubber clamp gaskets for a secure fit
- Operating temperature range of -30°C to 60°C at 5–95% humidity
Specifications Explained
Frequency rating (0 to 3 GHz): The adapter covers the bands used by most WiFi and many RF links, including 2.4 GHz and 5 GHz systems, without exceeding its rated range.
VSWR below 1.5: A lower VSWR means less signal is reflected back at the connection, which helps maintain link quality and reduces loss in compact setups.
Power handling (10 W): This rating suits typical low-to-moderate power RF applications; it is not intended for high-power transmission.
Contact resistance: Centre contact resistance is 6 milliohms and outer contact resistance is 2 milliohms, supporting efficient signal transfer through the mated pair.
Insulator resistance (500 megohms): High insulation resistance between conductors helps prevent leakage and maintains signal integrity.
Operating environment: The adapter is rated for -30°C to 60°C and 5–95% humidity, covering indoor and sheltered outdoor conditions within that range.
Compatibility and Requirements
This adapter is intended for RP-SMA interfaces only. It joins an RP-SMA male connector to an RP-SMA female connector; it is not a standard SMA adapter and will not mate correctly with standard SMA gender conventions. The operating voltage and dielectric withstanding voltage depend on the cable used, so check your cable assembly ratings before use.
Typical Uses
- WiFi and WLAN antenna and device connections
- Microwave equipment and digital communication systems
- Short RF jumper and interconnect runs
- Bench and field setups requiring a reverse-polarity SMA link
What's in the Box
Package includes 1 x RPSMA Male To RPSMA Female Adapter.
Quick specs
- Manufacturer
- Generic
- Frequency Rating
- 0 to 3GHz
- Operating Voltage (V)
- 170 – 335 VRMS (depends on cable)
- Dielectric Withstanding (V)
- 500-1000 VRMS (depends on cable)
- VSWR
- < 1.5
- Contact Resistance (ohm)
- Centre: 6 milliohm Outer: 2 milliohm


















