Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A DIY soldering kit that builds a heart-shaped board flashing 18 red LEDs in a pulsing sequence. It is a compact 3V through-hole project that gives beginners real component practice with a visible finished result.

Key Highlights

  • 18 red 5mm LEDs arranged in a heart-shaped display
  • Build-it-yourself through-hole soldering project
  • Runs from a 3V supply with simple automatic flashing
  • Includes PCB, resistors, capacitors and transistors
  • Compact 69 x 61mm board with a 0.021kg shipping weight
  • Rated for -40 to 85C and 5 to 95 percent humidity

Ideal For

  • Students learning through-hole soldering for the first time
  • Electronics club and classroom build sessions
  • Hobbyists who want a short, visible weekend project
  • Makers adding a small heart-shaped light to a display
  • Beginners practising component orientation and polarity

Buying Tip

Check that you already own a soldering iron, solder and a 3V battery supply, since none of these are included in the kit.

Elecvora expert review

Our verdict

A tidy, low-cost introduction to soldering that produces something you can actually look at when it is finished. The component count is small enough for a beginner, and the flashing heart gives immediate feedback on whether the build worked.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear, countable parts list with all components supplied
  • Visible result that confirms a successful build
  • Compact board that stores and displays easily
  • Low 3V rating keeps the circuit simple and safe to handle

Cons

  • Battery, holder wiring, soldering iron and solder are not included
  • No enclosure or mounting hardware is provided
  • Component placement must be correct or the pattern will not run

Best for

Beginners and students building a first or second soldering project

Not ideal for

Buyers wanting a pre-assembled, ready-to-use light

Specifications

Item TypeKit
Model No. / NameDIY Kit
Voltage Rating (V)3
Operating Temperature (°C)-40 to 85
Operating humidity5%~95%RH
Shipping Weight0.021 kg
Shipping Dimensions10 × 8 × 3 cm

What's in the box

  • 3 x 10K metal film resistors
  • 3 x 100 ohm metal film resistors
  • 3 x 47uF electrolytic capacitors
  • 3 x 9013 transistors
  • 18 x red 5mm LEDs
  • 1 x BT1 2-pin connector
  • 1 x PCB (69 x 61mm)

Frequently Asked Questions

Do I need to solder this kit?
Yes. It is supplied as separate components and a bare PCB, so assembly requires soldering. A soldering iron, solder and basic hand tools are not included.
What power supply does it need?
The circuit is rated at 3V and connects through the BT1 2-pin point. Use a supply that matches that rating rather than a higher-voltage source.
Is a battery included?
No. The package contains the PCB, resistors, capacitors, transistors, LEDs and the BT1 connector, but no battery or battery holder wiring.
How many LEDs does it have?
There are 18 red 5mm LEDs, arranged to form the heart shape on the board. All 18 are included in the kit.
What is the finished board size?
The PCB measures 69 x 61mm. Shipping weight for the kit is about 0.021kg in a 10 x 8 x 3cm package.
How should I store the finished board?
Keep it dry and within the rated -40 to 85C and 5 to 95 percent humidity range. Avoid bending the board or pulling on the LED legs when handling it.

Overview

This is a component kit for building a heart-shaped LED flasher by hand. The board carries 18 red 5mm LEDs that light in a repeating sequence, producing a pulsing circulation effect rather than a steady glow. Everything needed for the circuit is supplied as separate parts, so the build itself is the point: you place, orient and solder each component onto the PCB.

The circuit is a small transistor-based oscillator. Three transistors, three capacitors and six metal film resistors set the flashing rhythm, and the LEDs display the result. Because the parts are discrete and clearly countable, the kit doubles as a lesson in reading resistor values, matching capacitor polarity and identifying transistor pin order.

Key Features

  • 18 red LEDs: a full heart outline that flashes in sequence for a pulsing look.
  • Complete component set: PCB, resistors, capacitors, transistors and LEDs are all included.
  • 3V voltage rating: a low-voltage circuit suited to a small battery supply.
  • Automatic flashing: once assembled, the board runs its pattern without adjustment.
  • Compact footprint: the board measures 69 x 61mm, so it fits small enclosures and displays.
  • Wide operating range: rated from -40 to 85C and 5 to 95 percent relative humidity.

Specifications Explained

Voltage rating (3V) tells you the supply the circuit is designed around. Match your battery holder and cells to that rating rather than using a higher-voltage source.

Operating temperature (-40 to 85C) and humidity (5 to 95 percent RH) describe the conditions the assembled board is rated for. That range covers normal indoor use and most workshop environments.

Component values are printed in the parts list: three 10K metal film resistors (R1, R3, R5), three 100 ohm metal film resistors (R2, R4, R6), three 47uF capacitors (C1, C2, C3), three 9013 transistors (Q1, Q2, Q3) and 18 red 5mm LEDs. The PCB is the 69 x 61mm board, and BT1 is the 2-pin battery connection point.

Compatibility and Requirements

The kit is self-contained in terms of components, but it does not include a battery, battery holder wiring, a soldering iron, solder or hand tools. You will need a soldering iron, solder, a way to hold the board, and a 3V supply connected at BT1. No software, programmer or computer is required.

Typical Uses

  • A first or second through-hole soldering project for students and beginners.
  • A classroom or club exercise in component identification and orientation.
  • A small decorative heart light for a desk, shelf or display.
  • A practice board for anyone improving hand soldering accuracy.

What's in the Box

  • 3 x 10K metal film resistors
  • 3 x 100 ohm metal film resistors
  • 3 x 47uF electrolytic capacitors
  • 3 x 9013 transistors
  • 18 x red 5mm LEDs
  • 1 x BT1 2-pin connector
  • 1 x PCB (69 x 61mm)

Quick specs

Item Type
Kit
Model No. / Name
DIY Kit
Voltage Rating (V)
3
Operating Temperature (°C)
-40 to 85
Operating humidity
5%~95%RH
Shipping Weight
0.021 kg
See all specifications