
1 / 3 · Click to enlarge
AI Summary
The LEGACT POT-W10L333 is a slim force sensitive resistor that senses applied pressure from 20g to 200g by lowering its resistance as force increases. Its compact 10mm sensing area and fast response make it easy to add pressure control to microcontroller projects and wearables.
Key Highlights
- Measures applied force across a 20g to 200g range
- Resistance falls proportionally as pressure increases
- Compact film body with a 10mm square sensing area
- Fast response for dynamic and interactive applications
- Lightweight design at just 0.004 kg shipping weight
- Low power draw suits battery-operated devices
Ideal For
- Makers building pressure-sensitive inputs for microcontroller projects
- Wearable and smart-textile developers needing a thin force sensor
- Gaming and interface designers creating touch-sensitive controls
- Robotics and automation hobbyists adding contact force sensing
- Students learning analog sensor circuits and voltage dividers
Buying Tip
Check that your expected press forces sit within the 20g to 200g range, and plan a voltage-divider resistor so your microcontroller can read the resistance change clearly.
Elecvora expert review
Our verdict
A practical, low-cost force sensor for light-pressure projects where space is tight and fast response matters. It is best treated as a simple analog component that needs a divider circuit and calibration rather than a plug-and-play module.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 10mm sensing area suits small enclosures
- Fast sub-10ms response for interactive use
- Very light at 0.004 kg shipping weight
- Low power draw for portable designs
- Simple resistive output works with analog inputs
Cons
- Requires an external resistor and analog input
- No cable, connector or mounting hardware included
- Readings need calibration and are best for relative force changes
Best for
Makers and product developers prototyping pressure-sensitive controls and wearables
Not ideal for
Applications needing calibrated absolute force measurement or forces far outside 20g-200g
Specifications
| Item Type | Force Sensitive Resistor |
|---|---|
| Model No. / Name | POT-C10-W10L333 (20g-3g) |
| Sensor Type | Force Sensitive Resistor |
| Force Range | 20g-200g |
| Shipping Weight | 0.004 kg |
| Shipping Dimensions | 10 × 5 × 02 cm |
What's in the box
- 1 x Force Sensitive Resistor POT-W10L333 (20g-200g)
Frequently Asked Questions
How do I connect this force sensitive resistor?
Does it output a digital signal?
What force range does it measure?
What is included with the sensor?
How fast does it respond?
How should I care for the sensor?
Overview
The LEGACT POT-W10L333 is a force sensitive resistor (FSR) built for projects that need a simple, reliable way to detect and measure pressure. When force is applied to its sensing area, the resistance between its terminals decreases, so a microcontroller or analog circuit can read the change as a voltage. The sensor is specified for a 20g to 200g force range, which covers light touches through to firmer presses.
Its film construction keeps the sensor thin and flexible, and the 10mm square sensing area fits into enclosures, wearables and control surfaces where a larger sensor would not. The fast response time of under 10ms means it can follow quick changes in pressure, not just steady loads.
Key Features
- Force range of 20g to 200g: suited to light and moderate pressure sensing tasks.
- Resistance-based output: resistance drops as applied force rises, making readings easy to interpret.
- Compact sensing area: a 10mm square active zone on a slim, flexible body.
- Fast detection: response under 10ms for interactive and dynamic use.
- Low power requirement: a good match for battery-powered and portable designs.
- Lightweight: shipping weight is just 0.004 kg, so it adds almost nothing to a build.
Specifications Explained
Force range
The 20g to 200g window describes the force levels the sensor is intended to measure. Forces below the lower end may produce little usable change, while forces well above the upper end are outside the stated range. Plan your application so normal presses fall inside this band.
Resistance behaviour
This is a resistive sensor, not a powered module. Its resistance decreases as pressure increases, so you read it with a fixed resistor in a voltage divider and an analog input. There is no digital output and no onboard processing.
Size and response
The 10mm square sensing area concentrates measurement on a small zone, which helps when space is tight. The sub-10ms response supports applications where force changes quickly, such as touch controls or movement sensing.
Compatibility and Requirements
The sensor is designed to work with microcontrollers and analog circuits. You will need a controller with an analog input, a fixed resistor to form a voltage divider, and wiring to connect the sensor. No battery, cable or connector is included beyond the sensor itself. Because no voltage rating is specified in the product data, confirm suitable operating conditions for your circuit before use.
Typical Uses
- Pressure-sensitive buttons and control surfaces in consumer electronics
- Rehabilitation tools and force-monitoring devices
- Smart textiles, fitness trackers and other wearables
- Touch-sensitive gaming controllers
- Robotics and industrial automation sensing
What's in the Box
1 x Force Sensitive Resistor POT-W10L333 (20g-200g).
Quick specs
- Item Type
- Force Sensitive Resistor
- Model No. / Name
- POT-C10-W10L333 (20g-3g)
- Sensor Type
- Force Sensitive Resistor
- Force Range
- 20g-200g
- Shipping Weight
- 0.004 kg
- Shipping Dimensions
- 10 × 5 × 02 cm



















