Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A flexible 0.4mm thin-film force sensor that varies resistance from 20g to 6kg with under 10ms response. It provides a continuous analog signal for touch, pressure and force measurement in compact embedded designs.

Key Highlights

  • Wide 20g to 6kg force sensing range
  • Ultra-thin 0.4mm flexible film construction
  • Fast response time under 10ms
  • Continuous resolution for smooth analog output
  • High non-actuated resistance above 10MΩ
  • Operates from -40°C to +85°C

Ideal For

  • Electronics engineers prototyping force-sensing interfaces
  • Makers building interactive touch or pressure projects
  • Robotics developers needing compact force feedback
  • Medical device designers evaluating thin-film sensors
  • Product developers testing automotive or consumer input controls

Buying Tip

Plan a voltage-divider circuit and calibrate the sensor at your expected force levels, since the resistance curve is not linear across the full 20g–6kg range.

Elecvora expert review

Our verdict

The LEGACT RP-C18.3-ST is a practical thin-film force sensor for engineers who need a compact analog pressure input over a wide 20g–6kg range. Its fast response and flexible 0.4mm body make integration straightforward in prototypes, provided the user designs the readout circuit and calibrates for the sensor's non-linear response.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 20g to 6kg sensing range
  • Very thin 0.4mm flexible form factor
  • Fast <10ms response time
  • Stable repeatability of ±3% at 1000g

Cons

  • Requires an external resistor divider and ADC to read
  • Resistance curve is non-linear and needs calibration
  • Hysteresis of about 10% at 1000g affects precision

Best for

Prototyping force and pressure sensing in compact embedded systems

Not ideal for

Applications requiring high-precision absolute force measurement without calibration

Specifications

Sensitivity range20g to 6Kg
Thickness (mm)0.4
Shapeflexible
Actuation force20g, Res.&lt;=200KΩ
Resolutioncontinuous
Non-actuated resistance&gt;10M Ω
Response Time (mS)&lt;10ms
Repeatability Same part+/-3%, Average R@1000g
Hysteresis+10% , (RF+ - RF- )/FR+,1000g
Drift&lt;5%, 2.5kg load, 24H
Operating Temperature (°C)-40℃~+85℃

What's in the box

  • 1 x Force Sensitive Resistor RP-C18.3-ST (20g-6kg)

Frequently Asked Questions

How do I read the RP-C18.3-ST sensor?
The sensor changes resistance with applied force, so you typically use a voltage divider with a fixed resistor and read the resulting voltage with an analog-to-digital converter on a microcontroller.
What force range does this sensor cover?
It is specified for 20 grams to 6 kilograms, with an actuation force of 20g corresponding to a resistance of 200KΩ or lower.
Does the sensor need a power supply?
It is a passive resistive component and does not require its own power source, but the readout circuit will need a supply voltage appropriate for your microcontroller.
What is included in the package?
The package contains one Force Sensitive Resistor RP-C18.3-ST (20g-6kg).
Can I use it at high or low temperatures?
The operating temperature range is -40°C to +85°C, so it can be used in cold and hot environments within those limits.
How should I care for the sensor?
Avoid bending the film sharply or applying force beyond the 6kg range, and keep the active area clean and evenly loaded for consistent readings.

Overview

The LEGACT RP-C18.3-ST is a force sensitive resistor built on thin-film resistive technology. When pressure is applied to its surface, the resistance between its terminals drops in proportion to the force, giving a continuous analog signal that a microcontroller can read. The sensor covers a sensitivity range from 20 grams to 6 kilograms, making it useful for both light touch detection and heavier load sensing within that window.

At just 0.4mm thick and flexible, the RP-C18.3-ST can be placed on curved or uneven surfaces where rigid sensors would not fit. Its non-actuated resistance stays above 10MΩ, so the signal remains clean when no force is present.

Key Features

  • Wide force range: Detects forces from 20g up to 6kg.
  • Thin and flexible: 0.4mm profile adapts to compact and curved installations.
  • Fast response: Response time below 10ms supports dynamic sensing.
  • Continuous resolution: Output changes smoothly with applied force rather than in steps.
  • Stable repeatability: ±3% variation at 1000g for consistent readings.
  • Environmental tolerance: Rated for -40°C to +85°C operation.

Specifications Explained

Sensitivity range (20g–6kg): The sensor begins responding at about 20 grams and remains useful up to roughly 6 kilograms. At 20g actuation force, resistance is 200KΩ or lower.

Non-actuated resistance (>10MΩ): With no load, resistance is very high, which helps distinguish an untouched state from a pressed state.

Response time (<10ms): The sensor reacts quickly enough for real-time feedback in control loops and interactive interfaces.

Repeatability (±3% at 1000g): Repeated presses at the same force produce readings within a narrow band, supporting reliable threshold detection.

Hysteresis (+10% at 1000g): There is a small difference between loading and unloading curves, which is normal for this sensor type and should be considered in calibration.

Drift (<5% at 2.5kg over 24H): Under a sustained 2.5kg load, readings remain relatively stable over a 24-hour period.

Operating temperature (-40°C to +85°C): The sensor can be used in cold and hot environments within this range.

Compatibility and Requirements

The RP-C18.3-ST provides a variable resistance output, so it requires an external circuit to convert that resistance into a voltage or digital reading. A common approach is a voltage divider with a fixed resistor feeding an analog-to-digital converter on a microcontroller. No specific microcontroller, voltage supply or connector is specified in the product data; the appropriate circuit must be designed for the target system. The sensor itself is a passive resistive component.

Typical Uses

  • Touch and pressure sensing in interactive surfaces
  • Force feedback in robotics and prototyping
  • Medical device and wearable prototypes
  • Automotive occupant or pedal sensing experiments
  • Consumer electronics input controls

What's in the Box

1 x Force Sensitive Resistor RP-C18.3-ST (20g-6kg)

Quick specs

Sensitivity range
20g to 6Kg
Thickness (mm)
0.4
Shape
flexible
Actuation force
20g, Res.&lt;=200KΩ
Resolution
continuous
Non-actuated resistance
&gt;10M Ω
See all specifications