Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This switching ic is a good fit for everyday home and hobby use. Main specs: manufacturer Generic; product name LNK6667; case/package Esip 7C.

Key Highlights

  • Manufacturer: Generic
  • Product Name: LNK6667
  • Case/Package: Esip 7C

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerGeneric
Product NameLNK6667
Case/PackageEsip 7C
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The LNK6667 is listed in our switching ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Generic
  • Product Name: LNK6667
  • Case/Package: Esip 7C
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

A LinkSwitch™-HP device monolithically integrates a controller and high-voltage power MOSFET into one package. It has a newly developed analog control scheme, which enables continuous conduction mode (CCM), primary-side regulated (PSR) power supplies up to 90 W without the efficiency limitation of DCM or audible noise. It uses an enhanced peak current mode PWM control scheme with the multi-mode operation. The multi-mode control engine uses the error amplifier output signal voltage at the COMPENSATION pin to set the operating peak current and switching frequency to maintain the output voltage in regulation as shown in Figure 5. For COMPENSATION pin voltages lower than VC(MCM) (typ. 1.25 V) the device enters multi-cycle modulation (MCM) with a fixed peak current of 25% of the programmed current limit. Several innovative improvements have been added to the peak current mode control to allow primary side regulated CCM operation with no instability. The device meets less than 30 mW input power with no-load at high-line (LNK67xx families). Note: For more technical details go through Datasheet in the attachment section 

Features & Specifications:

  1. External current limit selection.
  2. Optional programmable shutdown delay time extension.• Optional remote On/Off.
  3. Optional fast AC reset.
  4. Primary-side sensed output overvoltage protection (OVP) .
  5. Lost regulation protection during output overload or short-circuit (auto-restart).
  6. Internal current limit over line compensation for constant overload power over the line.
  7. High-voltage bus overvoltage sense (line OV) for extended line surge withstand.
  8. High-voltage bus Undervoltage sense (line UV) for brown-in/ out protection.
  9. Accurate over-temperature protection (OTP).
  10. Output OVP/OCP/OTP shutdown type selection (hysteretic/ latching).
  11. Optional external latching shutdown input (current threshold)
  12. Cycle-by-cycle current limit control.

Package Includes:

1 x LNK6667 High-Power Off-Line Switcher IC

Quick specs

Manufacturer
Generic
Product Name
LNK6667
Case/Package
Esip 7C
Shipping Weight
0.001 kg
Shipping Dimensions
1 × 1 × 1 cm
See all specifications