Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This power management ic is a good fit for everyday home and hobby use. Main specs: manufacturer Generic; case/package SOP; operating temperature (°c) -40 °C to +85 °C. Check that your power source supplies -0.3V~8V before connecting it.

Key Highlights

  • Manufacturer: Generic
  • Case/Package: SOP
  • Operating Temperature (°C): -40 °C to +85 °C

Ideal For

  • Powering projects and devices
  • Spare or replacement pack
  • Portable builds

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerGeneric
Case/PackageSOP
Operating Temperature (°C)-40 °C to +85 °C
Supply Voltage-0.3V~8V
Length (mm)6
Width (mm)4
Weight (g)1 (Each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The LP4056 SOP-8 LP Chips Battery Charging IC is listed in our power management ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Generic
  • Case/Package: SOP
  • Operating Temperature (°C): -40 °C to +85 °C
  • Supply Voltage: -0.3V~8V (match this to your power supply; too high a voltage can damage the part)
  • Length (mm): 6 (measure your mounting space before ordering)
  • Width (mm): 4 (measure your mounting space before ordering)
  • Weight (g): 1 (Each) (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is LP4056 SOP-8 LP Chips Battery Charging IC. The LP4056 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. Its SOP package and low external component count make the LP4056 ideally suited for portable applications. Furthermore, the LP4056 can work within USB and wall adapter. No blocking diode is required due to the internal PMOSFET architecture and have prevent to negative Charge Current Circuit. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The LP4056 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. LP4056 Other features include current monitor, under voltage lockout, automatic recharge and two status pin to indicate charge termination and the presence of an input voltage.

 
Applications:
  1. Cellular Telephones, PDAs, GPS
  2. Charging Docks and Cradles
  3. Digital Still Cameras, Portable Devices
  4. USB Bus-Powered Chargers,Chargers
 

Note: Images are for reference only, the actual product may vary in terms of markings. Refer to datasheet in the ATTACHMENTS section for more info. regd. the product. 


Features:

  1. Programmable Charge Current Up to 1000mA
  2. No MOSFET, Sense Resistor or Blocking Diode Required
  3. Complete Linear Charger in SOP-8
  4. Constant-Current/Constant-Voltage
  5. Charges Single Cell Li-Ion Batteries Directly from USB Port
  6. Preset 4.2V Charge Voltage with 1.5% Accuracy
  7. Automatic Recharge
  8. BAT Pin Current: 1200mA
  9. PROG Pin Current: 1200uA

Package Includes:

1 x LP4056 SOP-8 LP Chips Battery Charging IC

 

Quick specs

Manufacturer
Generic
Case/Package
SOP
Operating Temperature (°C)
-40 °C to +85 °C
Supply Voltage
-0.3V~8V
Length (mm)
6
Width (mm)
4
See all specifications