Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 12-48V battery monitor with a green backlit LCD that shows remaining capacity percentage, pack voltage and a level icon. It supports lead-acid, Li-ion and LiPo packs and installs as a plug-and-play dashboard module.

Key Highlights

  • Reads 12V, 24V, 36V and 48V battery systems
  • Works with lead-acid, lithium-ion and LiPo packs
  • Green backlit LCD shows capacity, voltage and level icon
  • Low draw under 5mA to limit standby drain
  • Compact 60 x 24 x 15mm panel-mount housing
  • Plug-and-play cable and mounting screws included

Ideal For

  • DIY electronics builders adding a battery readout to a project
  • Solar and UPS users who want a simple pack status display
  • Robotics and electric vehicle hobbyists monitoring 12-48V packs
  • Technicians servicing lead-acid or lithium battery systems
  • Makers building custom battery enclosures and dashboards

Buying Tip

Confirm your pack voltage and chemistry before ordering, and check that the default 12V lead-acid mode can be set to match your lithium or LiPo pack.

Elecvora expert review

Our verdict

A practical, low-cost way to add a voltage and capacity readout to 12-48V packs without a complex battery management system. It suits simple monitoring tasks well, provided you set the correct battery mode and keep it within its temperature range.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Covers four common pack voltages in one module
  • Green backlit LCD shows percentage, voltage and level icon together
  • Very low current draw under 5mA
  • Compact housing with cable and screws included

Cons

  • Default mode is 12V lead-acid, so settings must be checked
  • Operating range limited to 0°C to 40°C
  • Percentage readout depends on correct battery mode selection

Best for

Simple at-a-glance voltage and capacity monitoring on 12-48V packs

Not ideal for

Applications needing full battery management, cell balancing or data logging

Specifications

Shipping Weight0.020 kg
Shipping Dimensions6 × 5 × 4 cm

What's in the box

  • 1 x LY6W 12-48V Battery Capacity Indicator Green
  • 1 x Connecting Cable
  • 4 x Screw

Frequently Asked Questions

Which battery voltages does the LY6W support?
It supports 12V, 24V, 36V and 48V battery systems, with an operating range of 8V to 48V DC.
Which battery chemistries can I use it with?
The indicator is listed as compatible with lead-acid, lithium-ion and LiPo batteries.
What does the display show?
The green backlit LCD shows remaining capacity as a percentage, the pack voltage and a battery level icon.
How much power does the indicator use?
Operating current is below 5mA, so it draws very little from the battery it monitors.
What is included with the indicator?
The package contains one LY6W indicator, one connecting cable and four screws.
What is the default battery mode?
The module ships in 12V lead-acid mode by default, so check and adjust the setting for your pack.

Overview

The LY6W is a small battery capacity and voltage indicator designed to sit on a dashboard or panel and give a quick readout of pack status. Instead of connecting a multimeter every time you want to check charge, you mount the module and read the green backlit LCD. It displays three things at once: remaining capacity as a percentage, the current pack voltage and a battery level icon.

The module covers 12V, 24V, 36V and 48V systems and is compatible with lead-acid, lithium-ion and LiPo batteries. Its operating current stays below 5mA, so it draws very little from the pack it monitors.

Key Features

  • Green backlit HTN LCD with green characters for clear reading in daylight and low light
  • Real-time display of capacity percentage, voltage and battery level icon
  • Wide 8V to 48V DC operating range with support for 12V, 24V, 36V and 48V packs
  • Compact 60 x 24 x 15mm housing weighing about 16g
  • Plug-and-play connection with a supplied cable and four mounting screws

Specifications Explained

Voltage range: the indicator runs from 8V to 48V DC and is intended for 12V, 24V, 36V and 48V battery systems. Matching the module to your pack voltage is the first thing to check before installation.

Chemistry support: lead-acid, lithium-ion and LiPo packs are all listed as compatible. The default battery mode is 12V lead-acid, so confirm the setting suits your pack before relying on the percentage readout.

Display: the HTN LCD uses a green backlight and green characters. It shows capacity in percent, voltage and a level icon, which together give a fuller picture than a single bar indicator.

Power draw: operating current is under 5mA, a low figure that keeps the monitor's own consumption modest.

Operating temperature: rated from 0°C to 40°C, so it suits typical indoor and sheltered installations.

Compatibility and Requirements

The LY6W is built for 12V, 24V, 36V and 48V battery systems using lead-acid, lithium-ion or LiPo chemistry. It is a panel or dashboard mount part measuring 60 x 24 x 15mm, with a plug-and-play connection type using the included cable. Installation requires a suitable cutout or mounting surface and the four supplied screws. Keep the unit within its 0°C to 40°C operating range.

Typical Uses

Common installations include electric vehicles, battery packs, solar power systems, UPS units, measuring instruments, cleaning machines, robotics and general DIY electronics projects where a simple voltage and capacity readout is useful.

What's in the Box

  • 1 x LY6W 12-48V battery capacity indicator, green
  • 1 x connecting cable
  • 4 x screw

Quick specs

Shipping Weight
0.020 kg
Shipping Dimensions
6 × 5 × 4 cm
See all specifications