Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by M5Stack, this product is a good fit for makers, students and electronics hobbyists. Main specs: soc ESP32-S3FN8 @ Dual-core Xtensa LX7, up to 240MHz; flash 8MB; external storage microSD.

Key Highlights

  • SoC: ESP32-S3FN8 @ Dual-core Xtensa LX7, up to 240MHz
  • Flash: 8MB
  • External Storage: microSD

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

SoCESP32-S3FN8 @ Dual-core Xtensa LX7, up to 240MHz
Flash8MB
External StoragemicroSD
DisplayST7789V2 @ 1.14", 240 x 135px
Keyboard56 keys (4 x 14), 160gf actuation force
Expansion InterfaceHY2.0-4P + EXT 2.54-14P
IR1 x Infrared Emitter
Audio CodecES8311
SpeakerNS4150B amplifier + 8Ω @ 1W speaker
MicrophoneMEMS microphone, SNR: 65 dB
IMUBMI270
Battery Capacity1750mAh
Operating Temperature0 ~ 40°C
Operating CurrentDC 4.2V @ 120.2mA
LoRa ModuleSX1262
LoRa Frequency Range868 ~ 923 MHz
LoRa Programmable Bit RateUp to 300kbps
LoRa AntennaSize: 108 x 9.3mm, Connector: RP-SMA (female), Gain: 3dBi
LoRa Transmit Power+22dBm
LoRa Receive Sensitivity-147dBm (low data rate mode)
LoRa Operating CurrentDC 5V @ 163.4mA
Supported ModulationFSK / GFSK / MSK / LoRa / OOK
GPS ModuleATGM336H-6N @ AT6668
GPS Communication InterfaceUART, default 115200bps @ 8N1
Supported GNSS SystemsGPS / QZSS / BD2 / BD3 / GAL / GLO
GPS Channels50 channels
GPS Positioning Accuracy<1.5m (CEP50)
GPS Update RateUp to 10Hz
GPS Time to First FixCold start: 23s, Hot start: 1s
Product SizeCardputer-Adv: 84.0 x 54.0 x 19.6mm
Product Weight77.2g
Package Size103.0 x 90.0 x 25.0mm
Gross Weight127.2g

Overview

The M5Stack Cardputer Mesh Kit for Meshtastic ESP32-S3 High Performance SX1262 LoRa 1.14 Inch IPS LCD GNSS GPS Audio I/O USB Development Module for Home Office, made by M5Stack, is listed in our range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • SoC: ESP32-S3FN8 @ Dual-core Xtensa LX7, up to 240MHz (make sure the rest of your system works at this frequency)
  • Flash: 8MB (space for firmware, files or media)
  • External Storage: microSD (space for firmware, files or media)
  • Display: ST7789V2 @ 1.14", 240 x 135px (measured diagonally; compare with the space you have before ordering)
  • Keyboard: 56 keys (4 x 14), 160gf actuation force
  • Expansion Interface: HY2.0-4P + EXT 2.54-14P (confirm your cable or board uses the same connector)
  • IR: 1 x Infrared Emitter
  • Audio Codec: ES8311

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


Specification:


Introduction: Cardputer Mesh Kit is a portable communication terminal kit that integrates LoRa Mesh networking with global positioning capabilities. The kit centers around the Cardputer-Adv core controller and the Cap LoRa-1262 communication expansion module. Cardputer-Adv is a card-sized portable programmable controller built on the Stamp-S3A module (based on ESP32-S3FN8). It features a 1.14" LCD screen and a 56-key compact keyboard for convenient on-site information display and command input. A built-in 1750mAh lithium battery ensures extended standalone operation. The device integrates an ES8311 audio codec, MEMS microphone, 1W speaker, and 3.5mm audio jack for voice interaction and audio output. Additional features include a 6-axis IMU BMI270, an infrared emitter, a microSD card slot, an HY2.0-4P Grove interface, and an EXT 2.54-14P expansion bus. The chassis supports magnetic attachment and is compatible with LEG0 mounting holes. Cap LoRa-1262 serves as the communication expansion module of the kit. It connects to the Cardputer-Adv via the EXT 2.54-14P interface, drawing power and control signals directly from the host — plug-and-play with no additional configuration required. The module is built around the SX1262 LoRa solution, supporting the 868 ~ 923 MHz band with a receive sensitivity of -147 dBm and a transmit power of +22 dBm. An RP-SMA external antenna and RF shielding ensure reliable long-range communication with strong interference immunity. An integrated AT6668 GNSS module with a built-in ceramic antenna supports multi-constellation positioning including GPS, BeiDou, GLONASS, and Galileo. The module also includes an HY2.0-4P interface for connecting external sensors. Cardputer Mesh Kit comes pre-installed with Meshtastic firmware, making it ready to use out of the box — no complex development required to join a LoRa Mesh network. The Cardputer-Adv and Cap LoRa-1262 work seamlessly together for easy configuration and intuitive positioning, making the kit well-suited for outdoor communications, node deployment, location tracking, and industrial inspection.


Core Controller (Cardputer-Adv): - Stamp-S3A core module (ESP32-S3FN8) - 56-key keyboard with 160gf comfortable key actuation - 1.14" LCD screen (240 x 135px) - ES8311 audio codec + NS4150B amplifier + 1W speaker + MEMS microphone - 3.5mm audio output jack - 6-axis IMU BMI270 - Infrared emitter - microSD card slot - Built-in 1750mAh lithium battery - HY2.0-4P Grove interface + EXT 2.54-14P expansion bus - Magnetic attachment on the back, compatible with LEG0 mounting holes Communication Expansion Module (Cap LoRa-1262): - LoRa modulation technology + GNSS global positioning system - Operating frequency: 868 ~ 923 MHz - Receive sensitivity as low as -147 dBm, transmit power +22 dBm - External RP-SMA antenna interface with built-in ceramic GPS antenna - Supports GPS / QZSS / BD2 / BD3 / GAL / GLO multi-constellation positioning - HY2.0-4P expansion interface (for external sensor connection) - Development Platform --- ArduinoPlatform

--- UiFlow2 --- ESP-IDF --- PlatformIO

Features:
1. All‑in‑one LoRa mesh terminal: ESP32‑S3 card‑sized computer with integrated SX1262 LoRa module and external RP‑SMA antenna for 868–923MHz mesh networking.
2. Compact QWERTY workstation: 56‑key keyboard plus 1.14" IPS screen for text chat, node control and on‑device configuration.
3. GNSS positioning: ATGM336H‑6N GPS module with multi‑constellation support and <1.5m typical accuracy for location‑aware projects.
4. Rich audio system: ES8311 codec, 1W speaker, MEMS microphone and 3.5mm jack for voice prompts, alerts and audio experimentation.
5. Expandable I/O: Grove port, dual 7‑pin headers, IR emitter and HY2.0‑4P connector for sensors, actuators and custom hardware.
6. Portable power design: 1750mAh internal battery, USB‑C charging, integrated magnet and lanyard hole for mobile field use.


Applications: Remote GPS Tracker Outdoor Mesh Networking Rapid Prototyping and Functional Verification Industrial Control and Automation Smart City / Smart Home In-Vehicle Positioning and Navigation Embedded System Development and Learning

Package Includes:
1 x Cardputer-Adv (Green Back Shell Version) 1 x LoRa-1262 Cap 

1 x LoRa Rubber Duck Antenna (RP-SMA Connector)

2 x M2 * 4mm cap head machine screw 1 x Hex Key L-Shape 1.5mm (For M2 Screw) 1 x Safety Warning Sticker



Product Safety Information

Quick specs

SoC
ESP32-S3FN8 @ Dual-core Xtensa LX7, up to 240MHz
Flash
8MB
External Storage
microSD
Display
ST7789V2 @ 1.14", 240 x 135px
Keyboard
56 keys (4 x 14), 160gf actuation force
Expansion Interface
HY2.0-4P + EXT 2.54-14P
See all specifications

Explore more