
1 / 3 · Click to enlarge
AI Summary
The M5Stack Fan Module v1.1 adds programmable active cooling to M5Stack stacks via an onboard STM32F030 MCU and I2C control. It lets you read and set fan speed while benefiting from stall protection in a compact 54 x 54 mm form factor.
Key Highlights
- Built-in STM32F030F4P6 MCU for intelligent fan control
- I2C communication at address 0x18 for speed reading and setting
- Stall protection helps prevent fan damage
- Compact 54 x 54 mm module weighs only 14.9 g
- 5V DC operation with low power draw
- Compatible with UIFlow 1.0, UIFlow 2.0, and Arduino IDE
Ideal For
- M5Stack users building stacked systems that need active cooling
- Embedded developers working on thermal management
- Makers using UIFlow or Arduino IDE
- Smart hardware prototypers
- Educators teaching I2C control
Buying Tip
Check that your M5Stack host provides a 5V supply and I2C access, and plan your code to use address 0x18.
Elecvora expert review
Our verdict
The M5Stack Fan Module v1.1 is a well-integrated cooling solution for M5Stack stacks, offering digital control and stall protection in a tiny package. It is ideal for developers who need reliable active cooling without adding bulk.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated STM32 MCU enables precise fan control
- I2C interface simplifies wiring and coding
- Stall protection adds safety
- Very compact and lightweight
- Works with popular development platforms
Cons
- Limited to 5V DC operation
- Operating temperature range of 0-40 °C may not suit extreme environments
- Requires I2C configuration knowledge
Best for
M5Stack users needing programmable cooling in stacked systems
Not ideal for
Projects requiring high-power cooling or operation outside 0-40 °C
Specifications
| Item Type | Cooling Fan |
|---|---|
| Rated Voltage (VDC) | 05 |
| MCU Type | STM32F030F4P6 |
| Power Consumption (W) | [email protected] |
| Operating Temperature (°C) | 0-40 |
| Communication | I2C (0x18) |
| Length (mm) | 54 |
| Width (mm) | 54 |
| Weight (g) | 14.9 |
| Shipping Weight | 0.028 kg |
| Shipping Dimensions | 10 × 20 × 16 cm |
What's in the box
- 1 x M5Stack Fan Module v1.1 (STM32F030)
Frequently Asked Questions
What is the I2C address of the fan module?
Can I control the fan speed programmatically?
What development platforms are supported?
What is included in the package?
What is the operating temperature range?
Does the fan have stall protection?
Overview
The M5Stack Fan Module v1.1 is a dedicated cooling solution for M5Stack stacked systems. It combines a 5V DC fan with an STM32F030F4P6 microcontroller, enabling digital control and monitoring over the I2C bus. This makes it straightforward to add active thermal management to embedded projects, smart hardware prototypes, or any M5Stack build that needs extra airflow.
Key Features
- STM32F030F4P6 MCU handles fan speed reading and control, plus stall protection.
- I2C interface at address 0x18 for simple integration with your code.
- 5V DC operation with very low power consumption, suitable for stacked systems.
- Compact dimensions of 54 x 54 mm and a weight of 14.9 g.
- Development platform support for UIFlow 1.0, UIFlow 2.0, and Arduino IDE.
Specifications Explained
The rated voltage of 5V DC means the module is designed to run directly from the 5V rail available in M5Stack stacks, so no separate power supply is needed. The I2C communication at address 0x18 allows your controller to query the fan speed and set the desired speed, while the stall protection feature can detect if the fan is obstructed and help prevent damage. With an operating temperature range of 0 to 40 °C, the module is suited to typical indoor environments. Its small footprint and light weight make it easy to add to a stack without significantly increasing size or bulk.
Compatibility and Requirements
The Fan Module v1.1 is designed for M5Stack stacked systems. It can be programmed using UIFlow 1.0, UIFlow 2.0, or the Arduino IDE. No additional specifications are required beyond a 5V DC supply and an I2C bus available on the host controller. Ensure your project’s operating environment stays within the 0 to 40 °C range.
Typical Uses
- Cooling M5Stack stacks during intensive processing tasks.
- Embedded devices that require active thermal management.
- Smart hardware prototypes where temperature control is important.
- Educational projects exploring I2C control and fan speed monitoring.
What's in the Box
- 1 x M5Stack Fan Module v1.1 (STM32F030)

Quick specs
- Item Type
- Cooling Fan
- Rated Voltage (VDC)
- 05
- MCU Type
- STM32F030F4P6
- Power Consumption (W)
- [email protected]
- Operating Temperature (°C)
- 0-40
- Communication
- I2C (0x18)



















