Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by M5Stack, this motherboard & development board is a good fit for makers, students and electronics hobbyists.

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The M5Stack M5Stamp C6LoRa Module ESP32-C6 SX1262 850-960MHz 2.4GHz Wi-Fi 6 Dual IPEX-4 LoRa Transceiver Module, made by M5Stack, is listed in our motherboard & development board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


Specifications:
SoC: ESP32-C6 (RISC-V 32-bit high-performance single-core processor 160 MHz + RISC-V 32-bit low-power single-core processor 20 MHz)
Flash: 16 MB
Wi-Fi: 2.4 GHz Wi-Fi 6
LoRa Chip: SX1262
LoRa Frequency: 850 ~ 960 MHz
LoRa Transmit Power: Max Transmit Power: +22 dBm / Max Sensitivity: -148 dBm
Antenna Connector: IPEX-4
LNA: SGM13005L4
GPIO Leads: 16x GPIO (G9/G11/G8/G10/G2/G7/G4/G5/G6/G15/G16/G17/G18/G20/G21/G22) + 5x EXT_IO Expansion (PI4IOE5V6408: EXT_P0 ~ P4)
Operating Power: Supports DC 3.7 ~ 5V input via the BAT pin / DC 3.3V input via the VDD_3V3 pin
Product Size (SMD): 18.0 x 15.0 x 2.3 mm
Product Weight: 1.7 g

Introduction: Stamp C6LoRa is a high-performance programmable LoRa module designed for the 850 ~ 960 MHz frequency band. Adopting SMD (Surface Mount Device) technology, it features a compact and small form factor ideal for high-density embedded integration. The core of the module consists of an ESP32-C6 SoC, an SX1262 LoRa RF chip, and an LNA signal amplification chip. Two onboard IPEX antenna connectors are provided for connecting external Wi-Fi and LoRa antennas respectively. The LoRa RF chip delivers a maximum transmit power of +22 dBm and a receive sensitivity of -148 dBm. The ESP32-C6 main controller integrates abundant peripheral interface resources, supporting secondary development for extended functions. It also supports 2.4 GHz Wi-Fi 6, unlocking more possibilities for IoT applications. A PI4IOE5V6408 IO expansion chip is integrated internally to control the LoRa module's transceiver circuit and signal amplifier enable function, achieving superior power consumption control while providing additional available IO resources. It supports DC 3.3 ~ 5V power input, adapting to various hardware deployment scenarios. It is ideal for long-distance communication applications such as smart irrigation, remote meter reading, and power equipment control.

Features:
1. Powered by the ESP32-C6 main controller, with 2.4 GHz Wi-Fi 6 support and rich peripheral interface resources for secondary development.
2. Integrates the SX1262 LoRa transceiver for 850 ~ 960 MHz operation, suitable for long-distance communication applications.
3. Built-in LNA enhances reception performance, with max transmit power of +22 dBm and max sensitivity of -148 dBm.
4. Compact SMD surface-mount package with a small 18.0 x 15.0 x 2.3 mm size, ideal for high-density embedded integration.
5. Equipped with dual IPEX-4 antenna connectors for external Wi-Fi and LoRa antennas, plus a PI4IOE5V6408 IO expansion chip for transceiver and signal amplifier control.

Package Included:
1 x Stamp C6LoRa



Product Safety Information

More from M5Stack

View all →

Related Products

View all →